Energy Management Equipment

Electrical power generation by an Organic Rankine Cycle (ORC). An ORC converts recovered waste heat to combined heat and power (CHP), where steam based energy recovery is not practically feasible, specifically for energy recovery at lower flue gas temperatures and smaller thermal input capacities. Power generation by a steam turbine, specifically ...

By Dutch Incinerators BV based in Sint Jansteen, NETHERLANDS. from Waste Heat Recovery Product line

The clear view into the electrical grid. The SINEAX AM3000 is a comprehensive instrument for measurement and monitoring of power systems. It stands out by the display quality and intuitive operation. The device provides a wide functionality, which can be extended further by means of optional components. It can be used directly for any system, from ...

By Camille Bauer Metrawatt AG based in Wohlen, SWITZERLAND. from Unifunctional Devices - Active / Reactive Energy Meters Product line

JP-4 Military Fuel Standard 10,000 µg/mL in methylene chloride, analytical standard.

By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY. from Drinking Water Reference Standards Product line

JP-5 Military Fuel Standard 10,000 μg/mL in methylene chloride, analytical standard.

By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY. from Drinking Water Reference Standards Product line

JP-8 Military Fuel Standard 10,000 µg/mL in methylene chloride, analytical standard.

By Merck KGaA, Darmstadt, Germany based in Darmstadt, GERMANY. from Drinking Water Reference Standards Product line

Automatic test bench to check fuel cells with automatic recording of characteristic U/I line, characteristic gas stoichiometry line, dynamic load behavior, characteristic line with different cell temperatures, gas dampening states, and operating pressures.

By Umwelttechnik MCZ GmbH based in Bad Nauheim, GERMANY. from Specialized Systems Product line

Oil-injected screw compressor for bio- and processgas. AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer ...

By Aerzener Maschinenfabrik GmbH based in Aerzen, GERMANY. from Biogas Screw Compressor Product line

HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize leakage. Rugged, precision-machined, straight body heavy wall steel tubing for body material—minimizes valve ...

By Hilliard Corporation based in Elmira, NEW YORK (USA). from HILCO Filter Equipment - Transfer Valves Product line

The Hilliard MK4800 is an electromagnetic, fail safe caliper brake. Spring applied, electric released, it is suitable for holding duty and emergency for applications such as heavy duty lift operations, conveyors, elevators and cranes. Alternative mounting arrangement: pin mounting, base mounting horizontal and base mounting angle. The MK4800 is ...

By Hilliard Corporation based in Elmira, NEW YORK (USA). from Braking Systems - MK Rail & Disc Brakes Product line

The Hilliard M400HS brake caliper is a hydraulic applied, spring retracted brake caliper for use in heavy duty industrial applications. The brake caliper is suitable for outdoor applications and has been designed for use in many different extreme environments. The M400HS brake caliper is capable of producing a maximum 12,960 lbf (57.6 kN) of ...

By Hilliard Corporation based in Elmira, NEW YORK (USA). from Braking Systems - Modular Brakes Product line

Operates on any pressurized gas (0-220 psig). Break-away torques up to 3,700 ft lb. Output speeds up to 12,000 RPM. For industrial gas turbine or reciprocating engines. Standard and custom interfaces available. Helical rotor design. Positive displacement. Roller-ramp overrunning clutch to pre-engage the starter to the turbine. Dynamically ...

By Hilliard Corporation based in Elmira, NEW YORK (USA). from Engine Starter Product line

Through years of experience and knowledge, we have patented innovative technologies designed to reduce nitrogen oxide (NOx) emissions for new or existing coal, oil, and gas fired boilers. Our CCA brand Low-NOx Burners (LNB) are configured to stabilize the combustion process and allow the unit to be operated at lower excess O2 by utilizing a flame ...

By CECO Environmental based in Dallas, TEXAS (USA). from CECO CCA Combustion Systems Product line

Gas Turbine Exhaust ducts are predominantly applied as a transition between diffuser and diverter systems, or between the diverter system and HRSG (inlet ducts). Our Peerless-Aarding brand Gas Turbine Exhaust Duct is engineered using the latest cold casing design, adapted to your operational conditions. With premium materials and decades of ...

By CECO Environmental based in Dallas, TEXAS (USA). from CECO Aarding - Gas Turbine Exhaust Systems Product line

HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize leakage. Rugged, precision-machined, straight body heavy wall steel tubing for body material—minimizes valve ...

By Hilliard Corporation based in Elmira, NEW YORK (USA). from HILCO Filter Equipment - Transfer Valves Product line

The A400 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The 400 requires a minimum disc diameter of 24' and is offered in 2 sizes to ...

By Hilliard Corporation based in Elmira, NEW YORK (USA). from Braking Systems - Caliper Brakes Product line

Overfire Air (OFA) systems divert a portion of the combustion air away from the primary combustion zone. Our CCA Combustion Systems brand Overfire Air system, deeply stages combustion for enhanced nitrogen oxide (NOx) reduction. By utilizing a unique port design to ensure advantageous air and fuel mixing, our OFA system can minimize NOx, achieving ...

By CECO Environmental based in Dallas, TEXAS (USA). from CECO CCA Combustion Systems Product line

Reduced tip measuring Junctions for fast speed of response. Rugged MgO insulated sheaths are fully annealed & can withstand the harsh conditions found in gas turbines. All stainless sheaths & fittings. TTEC’s Gas Turbine Exhaust Thermocouples provide long life in hostile environments & greatly reduce costs associated with ...

By Thermocouple Technology, LLC (TTEC) based in Quakertown, PENNSYLVANIA (USA). from Power Industry Thermocouples Product line

Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and ...

By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA). from Other Product line

Pulverized coal bunker CO/O2 analyzer is an electrical instrumentation equipment designed for blast furnace coal injection system online continuous detection of gas composition. Gas in the mill is sampled by instrument sampling probe installed on the mill (or mill outlet piping).Under the action of jet pump, sampling gas through probe filtering, ...

By HANGZHOU ZETIAN TECHNOLOGY CO., LTD based in Hangzhou, CHINA. from Industrial process - Laser Gas Analyzer Product line

24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of rotation.

By Hilliard Corporation based in Elmira, NEW YORK (USA). from Engine Starter Product line