Only show results in Texas? Ok

AEREON Energy Management Equipment

  • AEREON - Tail Gas Incineration Units

    Hydrogen sulfide or H2S is a lethal gas generated in refineries, petrochemical plants, and gas handling facilities. Sulfur recovery units produce tail gases that contain relatively substantial amounts of H2S. AEREON designs a special type of incinerator, designed to eliminate the H2S components, while inhibiting the creation of corrosive acid ...

    By AEREON based in Austin, TEXAS (USA). from Thermal Oxidation/Incineration Systems Product line

  • AEREON - Model Momentum Series - Non-Assisted Flares System

    AEREON's Momentum Series of non-assist flares provide smokeless performance without the need of additional air-blowers or assist gas for both high pressure and low pressure gas streams. Leveraging the increased momentum of gas that is passed through a simple nozzle or restricted opening, the waste gas intimately mixes with the ambient air and ...

    By AEREON based in Austin, TEXAS (USA). from Standard Flares for O&G Production Product line

  • AEREON - Model Cyclone Series - Air-Assist Flares

    AEREON's Cyclone Series Air-assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to eventually combine with the process gas, which passes through its own secondary riser and is distributed at the flare tip through a proprietary ...

    By AEREON based in Austin, TEXAS (USA). from Standard Flares for O&G Production Product line

  • AEREON - Model Inferno Series - Gas-Assist Flares

    AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through AEREON's proprietary ...

    By AEREON based in Austin, TEXAS (USA). from Standard Flares for O&G Production Product line

  • AEREON - Model Ghost Series - Enclosed Combustors

    With the roll out of Quad O regulations in the USA, crude/condensate tank batteries and well pads are required to conform to reduced emission levels if they have the potential to emit over 6 tons of VOC per annum. One of the three emission control end-of-line devices can be used: Flares, Enclosed Combustors or VRUs. When enclosed flames and ...

    By AEREON based in Austin, TEXAS (USA). from Standard Flares for O&G Production Product line

  • AEREON - Steam Assist Flares

    Steam assisted flares are flares designed to dispose of heavier hydrocarbon gases which have a tendency to smoke. In order to prevent smoke formation, steam is injected into the waste stream using peripheral steam rings, center stream spargers and/or inner induction tubes. Steam flares are used in applications where high pressure steam is ...

    By AEREON based in Austin, TEXAS (USA). from Custom Flares and VCUs for Onshore & Offshore Product line

  • AEREON - Flame Ring Flares

    Carbon dioxide is often used in fire extinguishers and snuffing systems with the intention of effectively extinguishing flames. When CO2 gas is a large percentage of a waste gas stream, at times it proves difficult to maintain a lit flare without the use of assist gas or a properly designed flame ring. Flare Industries’ industry-proven Flame ...

    By AEREON based in Austin, TEXAS (USA). from Custom Flares and VCUs for Onshore & Offshore Product line

  • AEREON - Gas-Assist Flares

    Gas-assisted flares are comprised of two risers (waste gas and assist gas) and an assist gas distribution ring at the tip that provides turbulence with combustion air and waste gas at the flare tip. Upon mixing, the increased turbulence in the waste gas stream, improves combustion efficiency and smokeless performance. These flares generally ...

    By AEREON based in Austin, TEXAS (USA). from Custom Flares and VCUs for Onshore & Offshore Product line

  • AEREON - Utility Flares

    Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium. Utility flares therefore, do not require auxiliary gas streams such as steam or air; two ...

    By AEREON based in Austin, TEXAS (USA). from Custom Flares and VCUs for Onshore & Offshore Product line

  • AEREON - Chimera Liquid Burner

    The Chimera was developed to flare liquid hydrocarbons without liquid fallout or soot formation (smoke). These burners provide excellent service for various onshore applications that require high destruction efficiency of liquid hydrocarbons. When oil is flared, a high pressure media such as an air, gas, or steam is required to mechanically ...

    By AEREON based in Austin, TEXAS (USA). from Custom Flares and VCUs for Onshore & Offshore Product line

  • AEREON - Peacock Liquid Burner

    The Peacock Burner was developed to flare liquid hydrocarbons without liquid fallout or soot formation (smoke). These burners provide excellent service for well testing operations and have been used in applications in the Gulf of Mexico and Arabian Gulf. When only oil is flared, a high pressure air or gas source is required to provide mechanical ...

    By AEREON based in Austin, TEXAS (USA). from Custom Flares and VCUs for Onshore & Offshore Product line

  • AEREON - Model Triton - Water Injected Sonic Flares

    Triton sonic flare technology allows for safe, efficient and smokeless flaring at elevated oil and gas production rates by injecting sea water into the flame envelope. High pressure sea water injection reduces flare emissions, helps minimize overall radiation levels from the flame, abates combustion noise, and preserves flame characteristics ...

    By AEREON based in Austin, TEXAS (USA). from Custom Flares and VCUs for Onshore & Offshore Product line

  • AEREON - Model MPGF - Multi-Point Ground Flare Systems

    When ample real estate is available, multi-point ground flare (MPGF) systems are an economical approach to enclosed (hidden) and smokeless combustion of large amounts of process gas. By inducing gas through a large array of high-pressure burning points/burners, smokeless combustion can be achieved with high turndown, while concealing all radiation ...

    By AEREON based in Austin, TEXAS (USA). from Custom Flares and VCUs for Onshore & Offshore Product line

  • AEREON - Model Mach-1 - Fixed Orifice Sonic Flares

    Mach-1 sonic flares are used in both onshore and offshore applications to dispose of high pressure waste gas streams with high smokeless capacities. By efficiently inducing high volumes of ambient air for more complete, smokeless combustion at sonic velocities, this advanced flaring technology allows for reduced levels of radiation and can be ...

    By AEREON based in Austin, TEXAS (USA). from Custom Flares and VCUs for Onshore & Offshore Product line

  • AEREON - Flame Front Generators

    Flame front generators are effective, time proven ignition systems which have been widely used in flaring applications for decades. The inherent reliability, rugged construction, ease of operation, and its economic advantages have allowed the flame front generator (FFG) to remain one of the most popular forms of pilot ignition in the industry. The ...

    By AEREON based in Austin, TEXAS (USA). from Flame Front Generator Pilot Systems Product line

  • AEREON - Model Utility Series - Flare Systems

    Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium (I.e. For burning of lighter gases). Utility flares therefore, do not require auxiliary gas ...

    By AEREON based in Austin, TEXAS (USA). from Standard Flares for O&G Production Product line

  • AEREON - Model Quad O/Oa - Designed and Certified Enclosed Combustors

    With the roll out of Quad O regulations in the USA, crude/condensate tank batteries and well pads are required to conform to reduced emission levels if they have the potential to emit over 6 tons of VOC per annum. One of the three emission control end-of-line devices can be used: Flares, Enclosed Combustors or VRUs.

    By AEREON based in Austin, TEXAS (USA). from Enclosed Vapor Combustion Systems Product line

  • AEREON - Model 275 - Retractable Pilot

    The Model 275 pilot is a high-tech, retractable pilot that has been adapted to operate on both high-energy electronic ignition and flame front ignition. Technically, the Model 275 pilot is a combination of the Model 270 Retrax Pilot and the Model 255 Geminex FFG Pilot, allowing for redundant ignition technology and retractability. This design ...

    By AEREON based in Austin, TEXAS (USA). from Electronic Pilot Systems Product line

  • AEREON - Model Momentum Series - Biogas Flares and Enclosed Flares

    The Momentum Biogas series of elevated flares is our most economical line of combustion equipment for the biogas sector, offering a cost-effective solution with rapid delivery. Momentum flares utilize a specially designed “burner and shroud” system to manage the intricate mixing with ambient air to provide a high DRE (98%) and high ...

    By AEREON based in Austin, TEXAS (USA). from Elevated Flares and Enclosed Ground Flares for the Biogas Industry Product line

  • AEREON - Air-Assist Flares

    Air assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to combine with the process gas, which passes through its own secondary riser. Upon mixing, the high-pressure air flow causes turbulence in the waste gas stream, improving ...

    By AEREON based in Austin, TEXAS (USA). from Custom Flares and VCUs for Onshore & Offshore Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you