Energy Management Equipment In Paraguay
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Excellent readable indication of a 4…20 mA signal on-site for a better process overview! The indicator shows the measured signal on the large, backlit display. An additional bar graph gives a quick process overview and a plain text field displays further information like the engineering unit or TAG. Limit value infringements are also signalized and an open collector can be switched. No ...
-
Manufactured by ZENNER International GmbH & Co. KGbased in GERMANY
The zelsius C5 ISF with Single-Jet Flow Sensor is the combination of economic and technical advantages. Thanks to a combination of an economic concept and a very compact design, the heat meter/ cooling meter zelsius® C5 ISF is outstandingly suitable for recording all accounting data for measuring energy consumption in heating and/or cooling ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
The BTU meter RH33 is used in applications with liquid energy carriers. It calculates the thermal energy of water acc. to EN1434, glycol/water mixtures or other fluids such as thermal oils. Temperature sensor matching using calibrated temperature sensors is done in the device. Potential for cost savings can be shown by using the software available as an accessory. The device has a custody ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Steam and heat computer for industrial energy calculation of steam and water. The steam and heat computer RMS621 calculates steam mass, steam heat quantity, net steam quantity, steam-heat differential, water heat quantity and water-heat differential in up to 3 simultaneous applications. Bi-directional and splitting range measurements are possible. It supports analog, PFM or pulse signals for flow ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Power supply for one 4 wire sensor or transmitter. The power supply has one output for supplying voltage to 4 wire sensors and transmitters. Connection to mono-phased a.c. networks or to two phase conductors of three-phase supply networks (TN-, TT- or IT-networks as per VDE 0100 T 300/IEC 364-3) with 100-240 V AC nominal voltage ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Universal flow and energy computer for gases, liquids and steam. The flow and energy manager RMC621 calculates standard volume as well as mass and energy flows of natural and technical gases, fluids and steam from flow, pressure, temperature and density. Depending on the medium calculation of the energy values occurs according to international standards (IAPWSIF97, SGERG88), real gas equations ...
-
Manufactured by EndressHauser AGbased in SWITZERLAND
Paperless recording, visualization and monitoring of the process values at the same time. Safe and complete recording and visualization of all process sequences. The Memograph M RSG40 has a wide range of functionality, modular construction and a intuitive operator concept. With its brilliant 7” TFT display it is possible to display process values e.g. as curves, as a circular chart display ...
-
Manufactured by ZENNER International GmbH & Co. KGbased in GERMANY
The zelsius C5 IUF ultrasonic heat meter and cooling meter operates with an innovative ultrasonic technology, specially developed for domestic energy measurement and district heating. The ultrasonic heat meter/ cooling meter zelsius C5 IUF with ultrasonic flow sensor is, thanks to a combination of modern measuring technology and a very compact design, outstandingly suitable for recording all ...
-
Manufactured by DEWESoftbased in SLOVENIA
Advanced and easy to use solutions for complete electric and hybrid vehicle development, validation and production. The electric motor and inverter testing, battery and battery charge testing, combustion analysis, hydrogen testing and ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
Carbolite Gero offers continuous mesh belt furnaces with a maximum operating temperature of 1100 °C. Mesh belt furnaces are suitable for a wide range of heat treat applications including hardening, annealing, tempering and stress relieving. Furnaces can be designed for single or multi-zone operation and water cooled zones can also be offered. Each mesh belt furnace can be supplied with both ...
-
Manufactured by DEWESoftbased in SLOVENIA
The Dewesoft solution can measure all the power quality parameters according to IEC 61000-4-30 Class A. In comparison to other power quality analyzers it’s possible to do more detailed analysis (e.g. raw data storing, behavior at faults, calculation of additional parameters ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The robust construction of the SBCF large chamber furnace makes it ideal for applications such as the heat treatment of steels and alloys, ceramics sintering and aerospace heat treatment. The SBCF chamber furnace is an industrial scale furnace based on a modular design principle which can be adapted to various applications. The furnace chamber is cubic in shape and is available in three ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The robust construction of LCF industrial chamber furnaces makes them ideal for applications such as the heat treatment of steels and alloy, ceramics sintering and aerospace heat ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The LGP large general purpose ovens offer the greatest choice of options in size and maximum temperature. The range spans from 500 to more than 13,000 litres, with a temperature span from 250 °C to 700 ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
Heavy duty applications: For heavy duty applications most furnaces are equipped with a hard wearing chamber hearth and higher rated heating elements for faster heat up and longer ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The CAF G5 is a furnace designed to test ash fusibility, and optionally, the increasingly popular determination of biomass or solid recovered fuels testing. The coal ash fusibility test furnace conforms to the Standards ISO 540:2008; ASTM D 1857 / D1857M – 04 (2010); DIN 51730:2007-09; DD CEN/TS 15370-1:2006 (biomass) and PD CEN/TR 15404:2010 (solid recovered fuels (SRF)). The CAF ...
-
Manufactured by DEWESoftbased in SLOVENIA
Advanced and easy to use solutions for complete electric and hybrid vehicle development, validation and production. The electric motor and inverter testing, battery and battery charge testing, combustion analysis, hydrogen testing and ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The HT high temperature ovens are manufactured in 4 standard chamber sizes with maximum operating temperatures of 400°C, 500°C and 600°C.Their robust construction incorporates heavy duty hinges, door catches and shelving systems. This range also provides a foundation upon which a wide range of custom modifications can be added. Typical examples of which are the more sophisticated ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
The GPC general purpose chamber furnaces are large floor-standing models. Available at 1200 °C and 1300 °C with capacities ranging from 131 to 350 litres. The following models have been renamed CWF: GPC 12/36, GPC 13/36, GPC 12/65 & GPC ...
-
Manufactured by Carbolite Gero Ltd - part of Verder Scientificbased in UNITED KINGDOM
To design and build a furnace with outstanding temperature uniformity, time-consuming calculations and simulations are required. Carbolite Gero has accumulated decades of engineering experience creating exceptional heat treatment systems. This experience is utilised in all of standard furnaces and ovens as well as custom modifications where temperature uniformity needs to be improved even ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you