Energy Management Equipment In Connecticut
-
PremiumManufactured by Hilliard Corporationbased in USA
The A400 is an arm style caliper brake designed to accept a large selection of Hilliard thrusters. These thrusters include spring applied hydraulic released, spring applied pneumatic released, hydraulic applied spring released, and pneumatic applied spring released. The 400 requires a minimum disc diameter of 24" and is offered in 2 sizes to accommodate a 1" and 1-1/2" thick disc. The design of ...
-
PremiumManufactured by Hilliard Corporationbased in USA
The Hilliard BBH2 Power Unit incorporates an engineered hydraulic circuit to control the brake torque during a typical stop. Large capacity hydraulic accumulators provide additional volume for precise control of brake pressure. Equipped with manual overrides and hand pump for power outages, high pressure filtration and control braking mode to meet sophisticated braking system ...
-
PremiumManufactured by Hilliard Corporationbased in USA
24 volt DC power. Solenoid actuated Positork drive. Output torque up to 80 ft lb. Splined output for gas turbine applications. SAE 3 mounting flange, multi-position. CW and CCW direction of ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Hilliard BBH4 power unit is suitable for brakes demanding pressures above 3,000 PSI. It includes on/off and ramped braking modes. The power units are highly customizable, allowing customers to specify component types for several items in the system, including the motor, electrical panel, RTD, and pressure transmitter. The unit includes an isolated hand pump specifically useful in power ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Hilco offers an alternative to string wound elements. Improve the ISO cleanliness level in your system by taking advantage of the Hilco 330 Series elements. Hilco offers both the standard 330 & 330 extended tube models as direct replacements. Available in both disposable and washable designs, metal or nylon end cap configuration. ...
-
PremiumManufactured by Hilliard Corporationbased in USA
HILCO Transfer Valves are available in three configurations: three-way, six-port (same side and opposite side), and split three-way. Spring and pressure loaded pad design instead of plug—provides positive sealing to minimize leakage. Rugged, precision-machined, straight body heavy wall steel tubing for body material—minimizes valve ...
-
PremiumManufactured by Hilliard Corporationbased in USA
Hilco manufactures complete fuel filtration systems which can incorporate all or any combination of these contaminate removal techniques. Put Hilco’s expertise to work in solving your most difficult liquid fuel filtration ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
-
PremiumManufactured by Hilliard Corporationbased in USA
HILCO PH-CGJ style filter elements incorporate conductive fibers which are co-pleated in between two layers of hi-performance microglass filter media. As a result the HILCO anti-static filter element dissipates static charge build up before discharge can occur. These style elements are available in every standard HILCO media grade ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Mini-Emissions burner is an Ultra-Low emissions round flame burner.The picture (right) is Zeeco’s GLSF Min-Emissions down-fired burner firing with Refining Fuel Gas in the outer tips and PSA gas in the center tip. This design provides a flame shape that is normally the same width as the outside diameter of the burner tile allowing the burners to be installed in close ...
-
based in USA
The 9E gas turbine is GE's robust and proven 50 Hz workhorse. With more than 600 units shipped, it has accumulated over 23 million hours of utility and industrial service-often in arduous climates ranging from desert heat and tropical humidity to arctic cold. 9E gas turbine systems are also designed for reliable operation and minimal maintenance at a competitively low installed cost. The 9E gas ...
-
Manufactured by Preferred Utilities Manufacturing Corporationbased in USA
The Preferred AP burner is a low NOx, high efficiency, natural gas and/or fuel oil fired burner for firetube and small watertube boilers. It features: 30 ppm NOx without FGR. Low excess air operation throughout the turndown range. High turndown (10:1) firing natural gas. ...
-
Manufactured by OEM Data Delivery, Division of OEM Controls Inc.based in USA
OEM Data Delivery’s BT (Bluetooth®) Tag is a simple device that can go on any and all equipment, attachments and tools to collect crucial utilization and location data on fuel-powered engines, electric-powered motors, and even non-powered equipment. At construction, mining, aggregate, utility, agriculture, and other jobsites, the BT Tag is ideal for managing earth-moving equipment, ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Free-Jet burner is a Next Generation emissions round flame ...
-
Manufactured by Nel ASAbased in NORWAY
The C Series electrolysers are ideal for a variety of industrial applications. Producing up to 30 Nm3/h of hydrogen gas at 99.9998% purity, these units replace the need for hydrogen tube trailers or liquid hydrogen storage. They can be containerized, and offer facilities flexible siting and reduced operational safety risks associated with delivered ...
-
Manufactured by Zeeco, Inc.based in USA
The Zeeco GLSF Min-Emissions burner is an Ultra-Low emissions round flame burner.The picture (right) shows Zeeco’s GLSF Min-Emissions round flame burners in operation .The design allows for a compact flame shape which is basically the width of the burner tile making Zeeco’s burners a great choice for applications that require the burners to be mounted close together or far apart while ...
-
Manufactured by Tidal Electric Inc.based in USA
Offshore tidal power generation (“tidal lagoons”) is a new approach to tidal power conversion that resolves the environmental and economic problems of the familiar “tidal barrage” technology. Tidal lagoons use a rubble mound impoundment structure and low-head hydroelectric generating equipment situated a mile or more offshore in a high tidal range area. Shallow tidal flats ...
-
based in USA
GE's 2.5 MW series wind turbine platform moves to a wider range of site applications by introducing the 2.85-100 and 2.85-103 wind turbines for increased customer value. GE's 50.2 meter proprietary blade design offers a 9%+ AEP increase over the 2.5-100. Focusing on performance, reliability, acoustic emissions, efficiency, and multi-generational product evolution, GE's 2.85-103 wind turbine ...
-
Manufactured by Infinity Fuel Cell and Hydrogen, Incbased in USA
Infinity’s award-winning Advanced Passive Water Removal (APWR) fuel cells are a major breakthrough in air-independent fuel cell design and performance. Passive water removal enabled NASA to fit a compact and simple balance of plant directly to the cell stack end plates. Each of the patented all-metal bonded cells in this stack has four integrated chambers joined into a single leak-tight ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you