Energy Management Equipment In West Virginia
-
Manufactured by Special Metals Corporationbased in USA
The INCOLOY 800 series of alloys, invented by the Special Metals Corporation Group of Companies, is the result of years of monitoring and maintaining the ultimate chemical properties for high-temperature strength and resistance to oxidation, carburization and other types of high-temperature corrosion. Each one a refinement of the one before, these alloys have set the industry standard in ...
-
Manufactured by Automatic Timing & Controls (ATC)based in USA
The VCFP96M is a complete single phase and three phase digital metering system suitable for low, medium and high voltage control panels, gensets, load banks, building management systems and power management systems. The VCFP96M can be used on single phase, three phase three wire as well as three phase four wire balanced or unbalanced systems. The six easy to access front control keys are used for ...
-
Manufactured by CBS ArcSafe, Inc.based in USA
The RRS-4 remote circuit breaker racking device boasts many of the same structural and mechanical components as the CBS ArcSafe RRS-1 unit, which make it the most portable, easily adjustable, and user friendly Remote Racking System in the industry today. What makes the RRS-4 different from its RRS-1 counterpart, and any other remote racking system on the market for that matter, is that it is ...
-
Manufactured by CBS ArcSafe, Inc.based in USA
The RRS-2 BE is CBS ArcSafe’s specially designed counterpart to the industry-leading RRS-2 universal remote racking system for extraction-style breakers. The RRS-2 BE is designed specifically for Motor Control Center (MCC) bucket removal applications where users would normally be required to perform the install or remove operation manually. Setup and operation of the RRS-2 BE is very ...
-
Manufactured by CBS ArcSafe, Inc.based in USA
CBS ArcSafe remote switch actuators are designed to remotely charge, close, and/or trip various styles and types of electrical equipment. Any remote switch actuator can be custom-built for any electrical device you have ...
-
Manufactured by ANDRITZ Separation - ANDRITZ Groupbased in AUSTRIA
The ANDRITZ paddle dryer / cooler, a machine with a lot to offer, to most materials. Dried or cooled? The continuous indirect heat transfer set-up within the paddle dryer’s interior produces quality product with incredible efficiency and a minimum of maintenance. Powdered, granulated or pasty materials? The paddle dryer is built to handle products with the utmost care - even toxic ...
-
Manufactured by Elgin Separation Solutionsbased in USA
Elgin Water Solutions has a unique ability to determine a customers electrical needs, engineer the system, price it, and integrate individual components into a functioning system. Our clients have the assurance of one responsible entity from concept to test and on through completion and commissioning at a competitive ...
-
based in USA
Nacelle’s MANNY™ system delivers conditioned field gas or CNG to dual fuel engines onsite. Our equipment is designed to integrate into completions operations safely and efficiently providing natural gas to individual engines in a manner that promotes and optimizes natural gas ...
-
Manufactured by Elgin Separation Solutionsbased in USA
Coanda Power Screens are modular intake structures including screens, accelerators, support frames, and controls. No secondary desilter is required. The modules are simply placed, leveled, and set into a ...
-
Manufactured by Special Metals Corporationbased in USA
NTMONTC* alloy 80A (UNS N07080/W. Nr. 2.4952 & 2.4631) is a wrought, age-hardenable nickel-chromium alloy, strengthened by additions of titanium, aluminum and carbon, developed for service at temperatures up to 815°C (1500°F). It is produced by high-frequency melting and casting in air for forms to be extruded. Electroslae refined material is used for forms to be forged. Vacuum ...
-
Manufactured by Flying W Plastics Inc.based in USA
Geothermal piping is creating a noticeable impact on the polyethylene market, with usage continuing to expand as residential and commercial customers look to reduce their heating and cooling costs while enjoying the benefits of utilizing a renewable energy source. Flying W Plastics is at the forefront in supporting the geothermal industry with its premium line of Earth Source GeothermalTM pipe. ...
-
Manufactured by Elgin Separation Solutionsbased in USA
Elgin Water Solutions builds modular distribution and power factor correction equipment to accelerate a project and improve its bottom ...
-
Manufactured by Extreme Endeavors & Consultingbased in USA
Intelligent Power Automation Control. Control AC Power With the Same Intelligence and Capabilities Used to Power Micro Electronics. The Intelligent Power Automation Control (IPAC) provides a grid power quality network-based power monitoring and control system. Do you have a critical location that can't operate without power? This product will send alerts over the internet when the power has ...
-
Distributed by J&M Industrialbased in USA
Technical Specifications: *Shipping info: One skid, 31x18x17 *Weight: 158 lbs. *Motor: 5 HP Marathon Electric motor, 3460 RPM, 230/460 Volt, 182T ...
-
Manufactured by CBS ArcSafe, Inc.based in USA
CBS ArcSafe® is pleased to introduce the SecureConnect Remote Operator for Allen-Bradley® CENTERLINE® 2100 Motor Control Centers (MCCs), allowing technicians to operate the SecureConnect safety system from up to 300 feet away, well outside the arc-flash ...
-
Manufactured by Englo, Inc.based in USA
Total square footage of roof area. Note any conduit and fixtures on the roof that cannot be relocated. This would reduce effective area of roof. Location of Kiln. Mapping of the Geographical ...
-
Manufactured by Automatic Timing & Controls (ATC)based in USA
Easily the most rugged and dependable of industrial percentage timers, the ATC 304 incorporates heavy-duty contacts that are capable of switching loads as large as 4.6 KW directly. ...
-
Distributed by J&M Industrialbased in USA
Product Details: *Serial Number: 774C399 *Size: 2X2-7 *100 GPM *128 FT HD *3500 RPM *Impellor Diameter: 6.12" *7.5 HP Marathon Electric Motor, 3475 RPM, 208-230/460 Volt, 3 Phase *Mounted On Rolling ...
-
Manufactured by Special Metals Corporationbased in USA
INCONEL nickel-chromium-iron alloy 601 (UNS N06601/W.Nr. 2.4851) is a general-purpose engineering material for applications that require resistance to heat and corrosion. An outstanding characteristic of INCONEL alloy 601 is its resistance to hightemperature oxidation. The alloy also has good resistance to aqueous corrosion, has high mechanical strength, and is readily formed, machined and ...
-
Manufactured by CBS ArcSafe, Inc.based in USA
The RRS-2 is a universal remote racking system capable of removing or inserting low- and medium-voltage non-rotary circuit breakers while the operator remains outside the arc-flash boundary. This device is portable, weighing less than 200 pounds, and user-friendly, requiring no modifications to the switchgear or circuit ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you