Energy Management Equipment Near USA
-
Manufactured by Anji Dasol Solar Energy Science & Technology Co.,Ltd.based in CHINA
Life shall continue after the sun sets, with fun. With well engineered energy lighting devices, DASOL is now able to provide safe, clean, and reliable electricity to the households, affordable. During night, parents may conduct their work, children may study and read, and the family may enjoy the gathering time, at a pleasant lighting ...
-
Manufactured by Gericke AGbased in SWITZERLAND
The GERICKE GMS Multiflux® batch mixer achieves a maximum degree of homogeneity and preserves high-quality ingredients during the mixing process. When fragile products, minor ingredients or the highest hygienic requirements are part of your process, GMS Multiflux®is the answer. ...
-
Manufactured by Anji Dasol Solar Energy Science & Technology Co.,Ltd.based in CHINA
Life shall continue after the sun sets, with fun. With well engineered energy lighting devices, DASOL is now able to provide safe, clean, and reliable electricity to the households, affordable. During night, parents may conduct their work, children may study and read, and the family may enjoy the gathering time, at a pleasant lighting atmosphere. Family needs light and children deserve ...
-
Manufactured by Anji Dasol Solar Energy Science & Technology Co.,Ltd.based in CHINA
The Solar cells have better elctrical parameters. Solar cells have been used in the module with better performance in terms of parameters. Visible Quality: Durable, high-quality, smooth aluminum alloy frames. Rigid construction 2400 Pa & 5400 Pa rated assembly. Specially designed drainage holes prevent the frame from deforming or breaking due to freezing weather and other ...
-
Manufactured by Jonseredbased in USA
Jonsered CC2235 comes complete with trimmer head, grass blade and saw blade. This flexibility makes it an ideal solution for people who require these benefits in one, effective package. Strong Clean Power engine with high torque and low emission. Developed with optimal ergonomics, performance and efficiency during long working shifts in mind. Vector 2-35 harness ...
-
Manufactured by Signal Group Ltdbased in UNITED KINGDOM
A medium duty heated pre-filter unit is installed in the 19' Rack housing of the analysers. The Prefilter is fitted with a choice of either one (Model 361) or two (Model 362) filter streams (for either two sample points, pre/post cat or twin cells). The units incorporate a heated head sample pump, gas distribution needle valve manifold, back pressure regulator, The unit provides 3 heated outputs ...
-
PremiumManufactured by AMETEK Land Instruments International Ltdbased in UNITED KINGDOM
A short wavelength infrared thermometer system specifically designed for high-precision, and rapid non-contact temperature measurements of the refractories inside blast furnace stoves. The application-specific Stove Dome (SD) system uses AMETEK Land’s advanced infrared radiation thermometer technology to monitor refractory temperatures around the stove dome or hot blast ...
-
Manufactured by Bruest Catalytic Heatersbased in USA
Bruest Catalytic Heaters are designed for safety, efficiency, and ease of use in mind. The heaters are offered in multiple sizes, BTU ratings, and configurations to meet varying application requirements. All Bruest Catalytic Heaters are available for installation in Class I, Division 1 or 2, Group D locations. ATEX certifications for Group II, Categories 2 or 3, Hazard G locations are ...
-
Manufactured by Catalytic Industrial Systemsbased in USA
Process flexibility, long service life and exceptional energy efficiency. The infrared energy is absorbed by the coating on the substrate first without having to wait for the mass of the substrate to reach the curing temperature. This allows the paint to cure more quickly. Gas infrared ovens can cure paints up to 10 times faster than convection which leads to cost savings on energy usage, ...
-
Manufactured by Bruest Catalytic Heatersbased in USA
Bruest HOTCAT natural gas line heaters uses Bruest’s catalytic heater panels as the heat source. The catalytic heater panels convert the fuel gas to CO2, water vapor, and infrared heat with virtually no NOx in the process. The process begins by preheating of the catalyst with electric power. Electric power is required for 20 to 30 minutes per zone during the startup process. Once the ...
-
Manufactured by Bruest Catalytic Heatersbased in USA
Bruest Catalytic Heaters’ Freez-Fiters pilot gas heaters safely and effectively heat low volumes of gas used by pilot regulators and instruments. The gas travels through the heat exchange coil to be heated by the infrared heat. The heater’s gas train includes all the necessary instruments to operate. Optional temperature controller allows the heater to modulate the heat output to fit ...
-
Manufactured by Bruest Catalytic Heatersbased in USA
While natural gas is normally transmitted in pipelines at pressures up to 1400 PSIG, Compressed Natural Gas (CNG) is normally stored in pressure vessels up to 3600 PSIG. For CNG to be usable, it must be decompressed or ‘let down’ to a more manageable pressure. This is a crucial part of the CNG PRS (Pressure Reduction System) process. Due to the Joules Thompson Effect, where gas ...
-
Manufactured by Catalytic Industrial Systemsbased in USA
The combination of the technologies delivers enhanced results for powder coaters and facilities that process a variable mix of parts. In a combination oven, the infrared portion of the oven gels, or sets, the powder coating ahead of the convection oven portion. This accelerates the convection soak portion that completes the cure. The infrared energy used in this ramp-up zone also prevents powder ...
-
Manufactured by Catalytic Industrial Systemsbased in USA
Manufacturers look to CIS convection ovens as a leading choice for the uniform, efficient cure of solvent and waterborne coatings and adhesives. Convection ovens provide an excellent, highly consistent cure for powder coatings. Convection ovens distribute heat evenly, and are well-suited to parts with complex shapes. Heat energy is moderate, rather than high intensity, so convection is ...
-
Manufactured by Facetbased in USA
Facet industrial coalescer cartridges provide efficient and economical filtration and coalescence of fluids in a wide range of applications where EI certification is not required. This broad range of liquid/liquid coalescers provides greater coalescing efficiency and contaminant holding capacity than most conventional coalescers or other separation techniques. As a result, Facet industrial ...
-
Manufactured by Husky Portable Containmentbased in USA
Husky's Fuel Bladder Tanks are the perfect answer to all your fuel storage and containment needs. All Husky bladder tanks are air pressure tested before shipping, are easy to handle, and fold down for compact, easy storage. ...
-
Manufactured by Power Flame Inc.based in USA
Type AC is an air atomized burner designed to fire #2 or similar distillate fuels with higher turn downs compared to pressure atomized burners. Combination fuel burners that will fire a wide range of gaseous fuels are also available. Power Flame Incorporated has introduced the Type AC Air Atomized #2 Fuel Oil and combination Gas / #2 Fuel Oil burners. The Type AC burners are catalog ...
-
Manufactured by Power Flame Inc.based in USA
Type C Burners are designed to fire a wide range of gaseous, as well as #2 or similar distillate fuels. Packaged Liquid Waste Fuel Burning systems, employing the basic design principles of the Type C dual fuel burner are also available. The Power Flame Model CGO dual fuel burner presents an optimum state-of-the-art design for maximum combustion efficiency and operating dependability, ...
-
Manufactured by Power Flame Inc.based in USA
NOVA Premix is a full premix burner for Sub. 30 PPM NOx applications without flue gas recirculation, for use with natural or L.P. gas. Proven NOx control for small to medium commercial/industrial applications. The NOVA Premix Gas Burner employs a fully premixed, high swirl stabilized combustion technology to provide proven low NOx solutions - Sub 30 PPM - without the use FGR for ...
-
Manufactured by Power Flame Inc.based in USA
Power Flame's NP2 Burner is our Ultra Low NOx solution with field proven Sub 9 to Sub 20 PPM NOx emission levels on a wide range of commercial, industrial and process applications. It utilizes premixed surface stabilized combustion all metal firing head for natural and L.P. gas. The burner relies on a patented, fully premixed surface stabilized combustion technology to minimize NOx ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you