Only show results in Massachusetts? Ok

Steam Boilers equipment for Energy Management

  • Premium

    Anguil - Industrial Energy & Heat Recovery Solutions

    Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    ACME - Model ABS-CEJS-24SC-01 - Auxiliary Boiler Systems

    For the past 45 years ACME-AEP has manufactured the key components of auxiliary boiler systems, namely boilers, superheaters, secondary pressure vessels and associated control systems. Power generation projects require an auxiliary boiler system to provide steam on start-up, during maintenance shut-downs, for steam turbine gland systems, ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers Product line

  • Premium

    ACME - Model ES Series - Large Electric Steam Superheaters

    Acme Electric Steam Superheaters are available for use with steam boilers as an auxiliary piece of equipment. Our superheaters are all custom made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers Product line

  • Premium

    CECO Peerless - Secondary Separators within Nuclear Steam Generator Vessels (Pressurized Water Reactor Plants)

    In a steam generator vessel or pressurized water reactor (PWR) plant, the reactor core heats water without boiling, and exchanges heat with a lower pressure water system, which will then turn to stream to power the turbine. The Peerless brand Secondary Separator within Nuclear Steam Generator Vessels (Pressurized Water Reactor Plants) or ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Peerless - Nuclear Power Separators Product line

  • Premium

    CECO Aarding - Gas Plant Diverter Dampers

    Diverter dampers are isolation devices that are commonly used in heat recovery steam generator (HRSG) exhaust stack applications. The Peerless-Aarding brand Gas Plant Diverter Damper can be configured in a low-leak or zero-leak design, and a toggle-type or pivot style diverter damper for HRSG, waste heat recovery, natural gas turbine, and other ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Aarding - Dampers Product line

  • Premium

    ACME - Model GS Series - Gas Fired Steam Superheaters

    ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers Product line

  • Premium

    ACME - Model C-620 Series - Electric Steam Boiler

    A compact, reliable source of steam for space and process heating, these immersion element boilers are virtually 100% energy efficient. They are completely packaged boilers ideally suited for applications requiring from 30 to more than 10,000 pounds of steam per hour. ACME Steam Generators are based on more than half a century of accumulated ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers Product line

  • Premium

    ACME - Model CEJS Series - High Voltage Electrode Steam Boiler

    The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor space.The ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers Product line

  • Premium

    CECO Peerless - Secondary Separators within Nuclear Reactor Vessels (Boiling Water Reactor Plants)

    A boiling water reactor, or BWR, is a nuclear reactor used to produce electrical power. Its reactor core heats the water, which then turns to steam to power a steam turbine. The Peerless brand Secondary Separator within Nuclear Reactor Vessels (Boiling Water Reactor Plants), or “steam dryer”, is used as the final stage of water ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Peerless - Nuclear Power Separators Product line

  • Premium

    ERG - Thermal Fluid Heaters Systems

    Thermal fluid heaters use a liquid medium to transfer heat energy into a process through a closed loop system. Through use of thermal oils or glycols higher operating temperatures can be safely achieved than is practical with steam systems, making thermal heaters easier than common steam systems to operate and maintain.

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM. from Thermal Systems Product line

  • Premium

    CECO Aarding - Gas Turbine Exhaust Systems - Heat Recovery Steam Generator (HRSG) Baffles

    Baffles are vanes or panels utilized to direct the flow of exhaust gas, typically through the heated surfaces of a Heat Recovery Steam Generator (HRSG) / boiler (harps or modules). Our Peerless-Aarding brand baffles are designed to minimize gas bypassing the harps or modules, and they maximize the exchange of heat in the harps or modules where ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Aarding - Gas Turbine Exhaust Systems Product line

  • Premium

    CECO Peerless - Nuclear Moisture Separator Reheater (MSR) Vessels

    Nuclear Moisture Separator Reheater Vessels (MSR) are installed between the high pressure and the low pressure steam turbines at a nuclear power plant. This technology is utilized to remove water condensed from the process steam to maximize thermal efficiency of the low pressure turbine and minimizes erosion/corrosion of steam loop piping.

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Peerless - Nuclear Power Separators Product line

  • Premium

    TOMRA - Energy Saving Upgrades

    TOMRA Sorting Food provides a range of energy saving upgrades to enhance the performance of the peeling line equipment.

    By TOMRA Sorting GmbH based in Asker, NORWAY. from Peeling Equipment Product line

  • Premium

    Memograph - Model M RSG40 - Advanced Graphic Data Manager

    Paperless recording, visualization and monitoring of the process values at the same time. Safe and complete recording and visualization of all process sequences. The Memograph M RSG40 has a wide range of functionality, modular construction and a intuitive operator concept. With its brilliant 7” TFT display it is possible to display process ...

    By Endress Hauser AG based in Reinach, SWITZERLAND. from Data Acquisition and Components Product line

  • Premium

    Model RMS621 - Energy Manager

    Steam and heat computer for industrial energy calculation of steam and water. The steam and heat computer RMS621 calculates steam mass, steam heat quantity, net steam quantity, steam-heat differential, water heat quantity and water-heat differential in up to 3 simultaneous applications. Bi-directional and splitting range measurements are possible. ...

    By Endress Hauser AG based in Reinach, SWITZERLAND. from System Products Product line

  • Premium

    ERG - Energy Recovery from Waste Systems

    Recovering energy from waste is a great way to address the problem of how to dispose of waste which cannot be recycled of composted, whilst at the same time reducing operating costs. Despite recent oil price trends, energy continues to be a significant input for industry. It is almost a certainty that the cost of waste disposal will continue to ...

    By ERG (Air Pollution Control) Ltd based in Horsham, UNITED KINGDOM. from Thermal Systems Product line

  • Steam Generation for Cogen Plants

    Steam generation for Cogen plants involves significantly less maintenance and wasted energy with IST’s OSTG technology. Initial installation time and associated costs are also reduced because the IST unit is factory built and shipped virtually ready to connect. Each pressure part module is completely hydrostatically tested prior to shipment, ...

    By Innovative Steam Technologies based in Cambridge, ONTARIO (CANADA).

  • Oilfield Boilers

    Saskatoon Boiler offers a wide assortment of boilers specially designed for rugged use in the oil field. Developed over many years based on feedback from oil field operators, Saskatoon Boilers have developed a reputation for toughness and dependability under the harshest conditions.

    By Saskatoon Boiler Mfg. Co. Ltd based in Saskatoon, SASKATCHEWAN (CANADA).

  • Economite - In-Stack Fuel Economizers

    In-Stack Economizers – Save Fuel with Minimal Space Usage. E-Tech’s “down-the-stack” Economite makes it possible to save fuel even if you cannot spare the room for a standard economizer unit. This custom-made, in-stack application is easily installed in an existing stack of any diameter. Economites can be fabricated with ...

    By E-Tech, Inc. based in Broken Arrow, OKLAHOMA (USA).

  • Sussman - Model SHE - Steam Heat Exchangers

    Sussman SHE Series Steam Heat Exchangers provide efficient product-side steam from plant steam. For use with reverse osmosis (RO), deionized (DI), distilled and other product side water where the process fluid cannot be mixed or contacted by plant steam or hot water.

    By Sussman Electric Boilers based in Long Island City, NEW YORK (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you