Only show results in Virginia? Ok

Steam Boilers services for Energy Management

  • Boilers & Pressure Systems

    Ashdale Engineering carry out competent persons inspections in accordance with Pressure Systems Safety Regulations (2000) on all types of pressure systems, ranging from large industrial steam boilers through to garage air compressors. We also draft and review written schemes of examinations for the above regulations (click here to find out more ...

    By Ashdale Engineering UK Ltd based in Milford Haven, UNITED KINGDOM.

  • LPHW Analysis Service

    The fluids within a LPHW or steam boiler system can have a direct and measurable effect on both system performance, reliability, maintainability and service life. Often overlooked by M&E specialists this area can not only give a snapshot look into current system performance but can be used to measure the effectiveness of general maintenance.

    By H2O Inc Water & Building Services based in Rutherglen, UNITED KINGDOM.

  • BROX - SCOTCH Steam Boiler

    SYK 753000 Kg/h 75 m2 350 to 20,000 kg / h capacity: 0,5 - 20 bar pressure range of liquid and gas fuel, 3 pass fire smoke tube, 98% efficient Scoch type steam boilers .

    By Elektro Dinamik Brox based in TURKEY.

  • Thermal Energy Audit

    Areas covered under Thermal Audit are: Steam generation boilers. Steam audit and conversation. Steam trap survey. Condensate recovery system. Insulation survey. Energy and material balance for unit operation. Heat exchanger. Waste heat recovery system.

    By Eco Energies based in Sirsa, INDIA. from Thermal Energy Audit Service line

  • Engineering Services

    EBE Engineering has more than a decade of experience with steam system plant and equipment. We are able to use this experience along with a broad depth of technical knowledge to help you optimise your system. Wether this is through steam system analysis and redesign or simply the replacement of existing mechanical steam traps with our innovative ...

    By EBE Engineering Ltd. based in Newbury, UNITED KINGDOM.

  • Plant/Facility Engineering Design Services

    FCS' professional staff includes qualified engineers and CAD draftsmen who have extensive experience developing detailed engineering packages for plant upgrades and modifications using appropriate tools for the job. Our experience includes reference plant design, fluid system design, equipment sizing and mechanical design, pipe flexibility ...

    By Fossil Consulting Services, Inc. (FCS) based in Columbia, MARYLAND (USA).

  • Engineering

    Structural design and detailed fabrication/erection drawings for Steel Structures: - Power plant structures (Boilers, Heat recovery steam generator systems, Stacks) - Oil and gas structures (Pipe racks, Shelters, Derrick supported flares) - Cement industry structures ( Conveyor structures, Silo structures and supports) - Commercial and industrial ...

    By SPES DESIGN srl based in Bucharest, ROMANIA.

  • Saving Energy - Insulation Services

    Every company wants to reduce their energy costs but many overlook obvious ways of doing so because they are not aware of what is available on the market to help them.

    By Nevron Eurotherm Insulation Services Ltd based in Bidston, UNITED KINGDOM.

  • LOTIS and MANTIS - Steam Reformer Inspections Service

    Steam reformers are critical assets to many refining, chemical and syngas plants, and one of the most challenging assets to maintain and operate. Common problems in reformer operations directly affect reformer tube life and lead to premature tube failure, pigtail failure, and damage to the header and convection section. To minimize unplanned ...

    By Quest Integrity Group based in Kent, WASHINGTON (USA). from Steam Reformer Inspections Service Service line

  • Steam Boilers Services

    The boiler system includes the feed lines, pumps, control rears, the boiler itself and the steam condensate systems. We do full range of boiler treatment for safe operation which include: Pre-treatment plant, Dosage and control equipment, Chemical treatments, On-site and laboratory analysis, reporting and guidance, Inspection and troubleshooting, ...

    By Aqua Technologies (Europe) Ltd based in Middlesex, UNITED KINGDOM. from Steam Boilers Services Service line

  • Heating Systems/Boilers

    All boiler make-up water contains impurities. As clean steam is released from the boiler, impurities build up. The increasing concentration of these impurities, such as dissolved solids, can lead to carry over into the steam, causing damage to piping, steam traps and even process equipment. The increasing concentration of suspended solids ...

    By Water Management, Inc. (WMI) based in Alexandria, VIRGINIA (USA).

  • Steam Condenser Retubing Services

    RetubeCo tools and techniques are used on the vast majority of condenser retubing projects in North America, whether at fossil or nuclear fueled power plants.

    By Retubeco Inc based in Ooltewah, TENNESSEE (USA).

  • Detailed Energy Audit – Plant/Site

    Assessment of boilers. Steam distribution system. Air compressors. Motors. Pumps. D G sets. Transformers. Assessment of capacitors. Cooling towers. Heat exchangers. Hvacs. Lightening system. Power quality analysis. Assessment of electricity tariff plan.

    By Eco Energies based in Sirsa, INDIA. from Detailed Energy Audit – Plant/Site Service line

  • Industrial and Commercial Solar Steam Processing

    Highlights: Steam generated at same pressure and temperature as base load boiler system. Easily interfaces with existing/conventional boiler systems. Pays back in 3-3.5 years against fuel oil. Applications: Salt Processing. Food & Beverages Dairy industry. Pharmaceutical and cosmetics. Textiles. Commercial Laundries. Steam cooking for large ...

    By ALTENER SOLAR LIMITED based in Nairobi, KENYA.

  • Manufacturing Services

    Atlantique Thermique Boilers: Solid fuel boilers (wood, biomass), such as « ATAF », « ATC' (depending on the power), producing steam or superheated steam, hot or superheated water. A wide range of power, from 1 to 10 MW for high and medium pression boilers and more with our group partners.

    By Atlantique Thermique based in Cestas, FRANCE.

  • Steam Turbine Repair

    Conhagen is well known for its steam turbine repair capabilities. A wide variety of models from virtually any manufacturer can be serviced. Conhagen routinely repairs the following types of turbine configurations: Impulse and reaction type axial flow, Tangential flow, Single and multi-stage, Condensing and non-condensing, and Extraction and ...

    By Conhagen Industries based in Benicia, CALIFORNIA (USA). from Steam Turbine Repair Service line

  • Technical & Engineering Services

    Owners representatives, design engineers, computerized maintenance management, plant assessment/ due diligence, steam turbine technical advisor (ta), gas turbine technical advisor (ta), boiler / (hrsg) technical advisor (ta), generator technical advisor (ta), inspectors, commissioning procedure development, vendor surveillance.

    By TransGlobal Energy, Inc. based in Cumming, GEORGIA (US) (USA).

  • PBS - Spare parts, Service and Overhauls of Power Engineering Equipment

    PBS is an original manufacturer and supplier of steam turbines, boilers and complete power generation units. In addition to this, we provide full service, maintenance and operation, supply original spare parts and perform overhauls.

    By PBS Velká Bíteš, a.s. based in Velká Bíteš, CZECH REPUBLIC. from Spare parts, Service and Overhauls of Power Engineering Equipment Service line

  • Power Generation

    SMS has been active in providing solutions for power generation applications since its inception. SMS is one of the few companies offering VPS/LPPS MCrAlY bond coat for turbine blades. Thermal spray solutions include coatings for Steam Turbine Stop Valves, Diaphrams, Turbine Blades and Boiler Tube Shields. Solutions offering combination of ...

    By Surface Modification Systems, Inc based in Santa Fe Springs, CALIFORNIA (USA).

  • Chemical Process Modeling Services

    Over 50 years of Combined Expertise in Chemical Process Modeling for the Energy Industries: Vapor / Liquid Partitioning Modeling for Flash Trains, Gas Absorbers, Condensers to +300 °C. Heterogeneous Fluid Modeling for Mineral Deposition in Steam Generators, Boilers and Process Equipment. Amorphous Silica Deposition and Inhibition Modeling in ...

    By Thermochem, Inc. based in Santa Rosa, CALIFORNIA (USA). from Chemical Process Modeling Services Service line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you