Only show results in Massachusetts? Ok

Steam Generators equipment for Energy Management

  • Premium

    ACME - Model GS Series - Gas Fired Steam Superheaters

    ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers Product line

  • Premium

    CECO Peerless - Secondary Separators within Nuclear Steam Generator Vessels (Pressurized Water Reactor Plants)

    In a steam generator vessel or pressurized water reactor (PWR) plant, the reactor core heats water without boiling, and exchanges heat with a lower pressure water system, which will then turn to stream to power the turbine. The Peerless brand Secondary Separator within Nuclear Steam Generator Vessels (Pressurized Water Reactor Plants) or ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Peerless - Nuclear Power Separators Product line

  • Premium

    CECO Aarding - Gas Plant Diverter Dampers

    Diverter dampers are isolation devices that are commonly used in heat recovery steam generator (HRSG) exhaust stack applications. The Peerless-Aarding brand Gas Plant Diverter Damper can be configured in a low-leak or zero-leak design, and a toggle-type or pivot style diverter damper for HRSG, waste heat recovery, natural gas turbine, and other ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Aarding - Dampers Product line

  • Premium

    CECO Aarding - Gas Turbine Exhaust Systems - Heat Recovery Steam Generator (HRSG) Baffles

    Baffles are vanes or panels utilized to direct the flow of exhaust gas, typically through the heated surfaces of a Heat Recovery Steam Generator (HRSG) / boiler (harps or modules). Our Peerless-Aarding brand baffles are designed to minimize gas bypassing the harps or modules, and they maximize the exchange of heat in the harps or modules where ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Aarding - Gas Turbine Exhaust Systems Product line

  • Premium

    CECO Aarding - Gas Turbine Bypass Exhaust Systems

    To achieve higher efficiency levels, gas turbine waste heat is used to generate process steam or steam turbine operation. Our Peerless-Aarding brand Gas Turbine Bypass Exhaust Duct allows flexible operation of the power island as well as the capability of starting the gas turbine in rapid starting mode and allowing the heat recovery ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Aarding - Gas Turbine Exhaust Systems Product line

  • Premium

    TOMRA - Energy Saving Upgrades

    TOMRA Sorting Food provides a range of energy saving upgrades to enhance the performance of the peeling line equipment.

    By TOMRA Sorting GmbH based in Asker, NORWAY. from Peeling Equipment Product line

  • Premium

    ACME - Model C-620 Series - Electric Steam Boiler

    A compact, reliable source of steam for space and process heating, these immersion element boilers are virtually 100% energy efficient. They are completely packaged boilers ideally suited for applications requiring from 30 to more than 10,000 pounds of steam per hour. ACME Steam Generators are based on more than half a century of accumulated ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers Product line

  • Premium

    CECO Aarding - Gas Plant Guillotine Dampers

    Guillotine Dampers are used when tight shut-off is required to isolate specific portions of an exhaust gas system for maintenance or by-pass purposes. Our Peerless-Aarding brand Gas Plant Guillotine Damper is a heavy-duty design commonly used in heat recovery steam generator (HRSG) systems. Our custom designs have proven reliable in some of the ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Aarding - Dampers Product line

  • Premium

    CECO Aarding - Gas Plant Stack Isolation Dampers

    Stack Isolation Dampers are designed to provide accurate air flow and isolation at high temperature levels, and reduce the stack effect of a system when offline, protecting ductwork from the elements. Our Peerless-Aarding brand Gas Plant Stack Isolation Dampers are engineered for optimal performance and efficiency, and are ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Aarding - Dampers Product line

  • Premium

    Inciner8 - Heat Exchangers System

    Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process. Inciner8's unique, patented air heat exchangers are a recovery technology that enables ...

    By Inciner8 Limited based in Southport, UNITED KINGDOM. from Waste to Energy Product line

  • Premium

    ACME - Model CEJS Series - High Voltage Electrode Steam Boiler

    The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor space.The ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers Product line

  • Premium

    CECO Effox-Flextor - Diverter Dampers

    Diverter Dampers are tight shut-off devices used to redirect hot gas flow from one outlet to another, and are commonly used in heat recovery steam generator (HRSG) exhaust stack applications. Our Effox-Flextor brand Diverter Dampercan be configured in a low-leak or zero-leak design, and a toggle-type or pivot style diverter damper for ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Effox-Flextor - Dampers Product line

  • Premium

    ACME - Model ABS-CEJS-24SC-01 - Auxiliary Boiler Systems

    For the past 45 years ACME-AEP has manufactured the key components of auxiliary boiler systems, namely boilers, superheaters, secondary pressure vessels and associated control systems. Power generation projects require an auxiliary boiler system to provide steam on start-up, during maintenance shut-downs, for steam turbine gland systems, ...

    By Acme Engineering Prod. Ltd. based in Montreal, QUEBEC (CANADA). from Boilers Product line

  • Premium

    Inciner8 - Heat Recovery System

    Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process.

    By Inciner8 Limited based in Southport, UNITED KINGDOM. from Incinerators by Application Product line

  • Premium

    CECO Peerless - Secondary Separators within Nuclear Reactor Vessels (Boiling Water Reactor Plants)

    A boiling water reactor, or BWR, is a nuclear reactor used to produce electrical power. Its reactor core heats the water, which then turns to steam to power a steam turbine. The Peerless brand Secondary Separator within Nuclear Reactor Vessels (Boiling Water Reactor Plants), or “steam dryer”, is used as the final stage of water ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Peerless - Nuclear Power Separators Product line

  • Steam Generation for Cogen Plants

    Steam generation for Cogen plants involves significantly less maintenance and wasted energy with IST’s OSTG technology. Initial installation time and associated costs are also reduced because the IST unit is factory built and shipped virtually ready to connect. Each pressure part module is completely hydrostatically tested prior to shipment, ...

    By Innovative Steam Technologies based in Cambridge, ONTARIO (CANADA).

  • Steam Generation

    Lipten’s roots are in steam generation and it is still at the core of our business today. Throughout our 40 plus years of operation, technologies may have changed, but not our commitment to provide the best value for your dollar. Be it boilers alone or a complete floor to roof energy center, Lipten is there to meet your needs. No matter how ...

    By Lipten Company based in Wixom, MICHIGAN (USA).

  • Lignite For Brownish-Black

    Lignite is brownish-black in color and has a carbon content of around 25-35%, a high inherent moisture content sometimes as high as 66%, and an ash content ranging from 6% to 19% compared with 6% to 12%.

    By Royal Industries based in Pune, INDIA.

  • Sussman - Model SHE - Steam Heat Exchangers

    Sussman SHE Series Steam Heat Exchangers provide efficient product-side steam from plant steam. For use with reverse osmosis (RO), deionized (DI), distilled and other product side water where the process fluid cannot be mixed or contacted by plant steam or hot water.

    By Sussman Electric Boilers based in Long Island City, NEW YORK (USA).

  • Power from Waste

    IIf you utilize Steam in your process or, you generate combustible or fermentable waste, then consider using the by-products to generate electricity. Use the generated electricity to power your factory and/or sell it onwards to the Grid. With payback periods of around 24 months this is a cost-effective method to reduce overheads and reduce waste.

    By Pi-Tech Consultancy based in Ely, UNITED KINGDOM.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you