Steam Generators Equipment For Energy Management In Africa
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Electrode boilers utilize the conductive and resistive properties of water to carry electric current and generate steam. An A.C. current flows from an electrode to one phase to the ground using the water as the ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
A compact, reliable source of steam for space and process heating, these immersion element boilers are virtually 100% energy efficient. They are completely packaged boilers ideally suited for applications requiring from 30 to more than 10,000 pounds of steam per hour. ACME Steam Generators are based on more than half a century of accumulated experience in the electric heating field. Easy and ...
-
Distributed by Cannon Bono Energia S.p.A. - part of the Cannon Groupbased in ITALY
Cannon Bono Energia’s range of waste heat recovery steam generators are used for steam production or energy generation utilising the waste heat from gas turbines, medium speed diesel engines or recovering the waste heat of some industrial ...
-
Manufactured by Garioni Naval - a brand of SVECOM PE Srlbased in ITALY
Thermal oil heater complete with combustion air preheating system. Efficiency > 93%. TH/AR is the most efficient type of thermal oil heater. It is equipped with an especially engeneered combustion air preheating system, allowing to rise the efficiency of this unique HI-THECH boiler up to 94%. The Heater is composed of a multibolar spirally rolled furnace and body, completely shielded on front ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
Using a combined heat and power (CHP) or cogeneration plant in a hospital is an ideal way of achieving improved energy efficiency and reduced carbon emissions. Its utilisation helps a hospital’s limited financial resources go further. Natural gas is a clean-burning low carbon emission fuel. A CHP plant facilitates the high efficiency use of this fuel, by recovering not only electricity but ...
-
Manufactured by Forney Corporationbased in USA
Forney Parallel Air Flow (PAF) burners are custom engineered for a wide range of heat inputs while providing the flexibility of firing a variety of fuel ...
-
Distributed by Cannon Bono Energia S.p.A. - part of the Cannon Groupbased in ITALY
FT Series fire-tube steam generators are an efficient, compact and reliable solution for steam production, available in different configurations, from 1 to 6 tons/h, with pressure ranging from 12 to 15 ...
-
Manufactured by Garioni Naval - a brand of SVECOM PE Srlbased in ITALY
NG/C steam generators belong to the two smoke passes with dry back type. Studied to have a minimum efficiency of 90%. It’s delivered complete with all regulation and safety devices. lt can use every kind of burner on market, to grant immediate after sales service in every town. Steam production from 300 up to 6.000 Kg/h. Pressure up to 18 bar. Completely automatic working, they include all ...
-
Manufactured by AC Boilers S.p.A. - Sofinter Groupbased in ITALY
AC BOILERS SpA, formerly Ansaldo Caldaie, has extensive experience with Heat Recovery Steam Generators for large Combined Cycle Power Plants and has installed over 100 units in Italy and abroad. Our range of production ...
-
Manufactured by A/S Cimbria - part of AGCO Corporationbased in DENMARK
level in a rational and profitable way . The Cimbria continuous flow dryer program includes three primary models: Single-, Twin-, and Triple-column Dryers, uniform in construction but varying in width. Each model will be variable in size (height) from 14 to 38 sections with intermediate ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
The mobileFLEX portfolio is the latest advancement from GE to deliver lower-cost, lower-emission power to drill rigs, artificial lift enhanced oil recovery and oilfield equipment. An all-gas alternative to diesel units, mobileFLEX is an EPA mobile-certified solution that provides a cost advantage to energy producers and operational advantage to drilling contractors by utilising field gases. For ...
-
Distributed by Cannon Bono Energia S.p.A. - part of the Cannon Groupbased in ITALY
SG and SM series fire-tube steam generators represent the ideal solution for reducing electrical consumption, increase the degree of safety of the plant – also in case of unsupervised operation – and comply with new emission regulation, using simple, yet reliable ...
-
Manufactured by Garioni Naval - a brand of SVECOM PE Srlbased in ITALY
Tubeless steam generators VPR are the result of considerable experience acquired by Garioni Naval in costruction of traditional steam boiler. They are ideal for small and medium size plants where medium pressure (up to 10 bar) steam is required. Their particular tubeless design ensures standards of safety and realibility which have received considerable acclaim from our customers. Our tubeless ...
-
Manufactured by ANDRITZ Energy & Environment GmbHbased in AUSTRIA
We provide all the power generation technologies and services you need, up to complete power ...
-
Manufactured by Nehlsen AGbased in GERMANY
The decision to construct this power plant was made in May 2005; and since summer 2007, the Combined Heat and Power Plant has been supplying the company Pfanni, manufacturer of potato-based instant products, with process steam and electrical power by means of a co-generation system.By utilising around 95 000 tonnes of refuse-derived fuel, the plant supplies 200 000 tonnes of steam and more than ...
-
Manufactured by Evapco Inc.based in USA
For steam cycles of 1 to 1000MW, EVAPCO-BLCT Dry Cooling can supply the Air Cooled Condenser that is right for your application. Irrespective of fuel source, biomass, fossil, or solar, an EVAPCO-BLCT Dry Cooling ACC can significantly reduce the water requirements of any power plant utilizing a steam ...
-
Manufactured by Nehlsen AGbased in GERMANY
Ecologically and economically biogas is an important renewable energy source - saving energy resources and forming an alternative to fossil fuels. In the absence of oxygen, materials like slurry and manure, food waste and other biomass are turned into biogas through the activity of micro-organisms. The biogas is then used to generate electricity, steam and heat in a combined heat and power plant ...
-
by EGYPTROLbased in EGYPT
Examples of Power Boilers systems we test, commission, optimize, service and ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you