Steam Generators Equipment For Energy Management In Canada
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
A compact, reliable source of steam for space and process heating, these immersion element boilers are virtually 100% energy efficient. They are completely packaged boilers ideally suited for applications requiring from 30 to more than 10,000 pounds of steam per hour. ACME Steam Generators are based on more than half a century of accumulated experience in the electric heating field. Easy and ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Electrode boilers utilize the conductive and resistive properties of water to carry electric current and generate steam. An A.C. current flows from an electrode to one phase to the ground using the water as the ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...
-
Distributed by Valutech Inc.based in CANADA
Valutech is the sole distributor for Kam Thermal Equipment Ltd. Kam produces a variety of heat exchangers using computer generated thermal and mechanical design, seismic analysis and detailed, scaled manufacturing drawings. Each KAM heat transfer device is individually designed to ensure optimum compatibility with its application. ...
-
Manufactured by Clayton Industriesbased in USA
Clayton Heat Recovery Steam Generators are in operation around the world serving co-generation plants, thermal oxidizers, incinerators and many other applications. Systems are able to produce high pressure steam—up to 450 psig—as well as high temperature hot water. Clayton manufactures two types of heat recovery ...
-
Manufactured by Clayton Industriesbased in USA
Clayton steam generators will normally fit in any available area while also reducing construction costs on new building ...
-
Manufactured by John Cockerill Groupbased in BELGIUM
Calling on more than 200 years of expertise, John Cockerill Energy designs, manufactures and maintains steam producing industrial boilers under the brand names of Denapak and Denarad. We provide technological solutions to our clients in various sectors: chemicals, petrochemicals, the foodstuffs industry, biomass ...
-
Manufactured by Solartron Energy Systems Incbased in CANADA
Enhanced Oil Recovery (EOR) is a term for techniques used to increase the amount of crude oil that can be extracted from an oil field. Solar EOR uses concentrated solar power to concentrate the sun’s energy to heat water and generate steam. The steam is then injected into an oil reservoir to thin out the the heavy crude oil to make it easier to remove from the ground. The traditional method ...
-
Manufactured by Carbon OxyTech Inc.based in CANADA
Low temperature technology is developed by our team to convert residual feedstock into carbon nanotubes, graphene, and carbon ...
-
based in CANADA
Concentrating Solar Power (CSP) is a technology that involves using a large-scale array of parabolic reflectors or mirrors to collect solar thermal energy. This heat energy is used to generate steam to produce electrical power with traditional turbines as are used in fossil fuel and nuclear plants ...
-
Manufactured by Delta T Heat Exchangersbased in CANADA
Brazed Plate Heat Exchangers represent the most compact, rugged and cost-effective means of transferring heat in many industrial and refrigerant applications. Standard Brazed Plate heat Exchangers are constructed with 316 Stainless Steel with copper brazing materials to provide exceptional corrosion resistance. The SB-Series features corrugated plates that produce highly turbulent flow in a ...
-
Manufactured by Solartron Energy Systems Incbased in CANADA
The US Department of Energy estimates that currently there are 89 billion barrels of additional oil trapped in onshore reservoirs. Governmental agency claims that the use of Enhanced Oil Recovery (EOR) technologies on US reserves could increase the country’s oil recovery from approximately 30% to more than 60%. If this oil was added to the US proven reserves, the country would rank fifth in ...
-
Manufactured by Durag Groupbased in GERMANY
The D-HG 400 high energy ignition device is suitable for the ignition of gas or liquid fuels in industrial burners of any ...
-
Manufactured by John Cockerill Groupbased in BELGIUM
Heat recovery steam generators constitute a key element in the energy performance of electric power plants. They are also at the heart of our history. To design and propose innovative heat recovery steam generators solutions, John Cockerill Energy is able to combine over 200 years of expertise with its desire to conceive the technologies of ...
-
Manufactured by Rentech Boiler Systems, Inc.based in USA
Rentech’s cross flow HRSG is a compact design, engineered to fit in almost any footprint. These units can be provided in multiple gas flow configurations, adding to the design flexibility. Tube arrangements can be staggered or inline to maximize heat transfer and to minimize draft losses for maximum efficiency. Our cross flow boilers utilize a rigid carbon steel outer casing and internal ...
-
Manufactured by Wellons, Inc.based in USA
Wellons is uniquely qualified to handle all aspects of your electrical generation project. With more than 50 years experience in steam generation systems, we engineer and manufacture a full line of proprietary equipment to burn biomass fuels for the forest products industry. Wellons projects have been completed internationally and include hundreds of successful steam generation systems and ...
-
Manufactured by BMT USAbased in USA
BMT steam-to-steam Pure and Clean Steam Generators utilize plant steam as the heating source to produce pure or clean steam. The tube and shell heat exchange is made from 316L stainless steel and can be built in single-tube-sheet or double-tube-sheet construction. The shell side of the evaporator is filled with plant steam providing heat to the evaporator tubes. The tubes are filled up to ...
-
by EMISPECbased in CANADA
Emispec offers industrial gasification solutions for the conversion of biomass and/or post consumption residual waste material for applications of: Hydronic heating (hot water). Steam generation (Industrial and institutional). Power cogeneration. Hot water or steam boilers transform/transmit the energy contained in biomass to a fluid. They are composed at least two elements: a furnace (where the ...
-
Manufactured by Thermogenics Inc.based in CANADA
Automatic Packages once-through coil tube generators for unattended operation in specific ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you