Steam Generators Equipment For Energy Management In Latin America
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
A compact, reliable source of steam for space and process heating, these immersion element boilers are virtually 100% energy efficient. They are completely packaged boilers ideally suited for applications requiring from 30 to more than 10,000 pounds of steam per hour. ACME Steam Generators are based on more than half a century of accumulated experience in the electric heating field. Easy and ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Electrode boilers utilize the conductive and resistive properties of water to carry electric current and generate steam. An A.C. current flows from an electrode to one phase to the ground using the water as the ...
-
Manufactured by Clayton Industriesbased in USA
Clayton Heat Recovery Steam Generators are in operation around the world serving co-generation plants, thermal oxidizers, incinerators and many other applications. Systems are able to produce high pressure steam—up to 450 psig—as well as high temperature hot water. Clayton manufactures two types of heat recovery ...
-
Manufactured by Clayton Industriesbased in USA
Clayton steam generators will normally fit in any available area while also reducing construction costs on new building ...
-
Manufactured by Clayton Industriesbased in USA
Packaged steam generating systems from Clayton Industries, which are available in a variety of standard and custom designed configurations, provide compact and convenient packages that are fully wired, assembled and piped at the factory. Clayton Steam Generator ...
-
Manufactured by Zeeco, Inc.based in USA
Zeeco’s Free Jet power burners use our patented technology that adds fuel staging to the proven Venturi design and free jet mixing theory, reducing emissions in some applications to as low as single-digit numbers. With Free Jet power burners already hard at work in the refining, petrochemical, power, LNG, municipality, pulp and paper, pharmaceutical, and other industries that require steam ...
-
Manufactured by Clayton Industriesbased in USA
Clayton steam generators will normally fit in any available area while also reducing construction costs on new building ...
-
Manufactured by Clayton Industriesbased in USA
Clayton steam generators will normally fit in any available area while also reducing construction costs on new building installations. ...
-
Manufactured by ANDRITZ Energy & Environment GmbHbased in AUSTRIA
We provide all the power generation technologies and services you need, up to complete power ...
-
Manufactured by Evapco Inc.based in USA
For steam cycles of 1 to 1000MW, EVAPCO-BLCT Dry Cooling can supply the Air Cooled Condenser that is right for your application. Irrespective of fuel source, biomass, fossil, or solar, an EVAPCO-BLCT Dry Cooling ACC can significantly reduce the water requirements of any power plant utilizing a steam ...
-
Manufactured by ELIQUO TECHNOLOGIES GmbHbased in GERMANY
LYSOTHERM is a unique THP technology that uses tubular heat exchangers and thermal oil, instead of steam or chemicals for the hydrolysis process. ELIQUO designs and manufactures LYSOTHERM in ...
-
Manufactured by Clayton Industriesbased in USA
Clayton manufactures a line of Steam Generators to provide superheated steam. These units use the same proven design as the basic Steam Generator that produces saturated steam, but with the addition of an integral super-heater section to the helical coil, in which the steam is superheated. The use of the integral super-heater section eliminates the need for a separately fired ...
-
Manufactured by Piller Blowers & Compressors GmbHbased in GERMANY
Waste heat from thermal separation and other industrial processes is often released unused into the environment through cooling towers or condensers. At the same time, there is an extremely high demand for process steam. PILLER has the solution: The PILLER Industrial Heat Pump which enables users to recover surplus heat and to supply steam. The PILLER Industrial Heat Pump shifts the waste heat ...
-
Manufactured by SAACKE GmbHbased in GERMANY
The SA ACKE TEMINOX GL burner combines all the benefit s of a modern combustion plant . It is designed for industrial heat and steam generation. It s ef ficient and low-pollut ant combustion complies with the most stringent NOX emissions requirements in place with a low CO and residual oxygen content in the exhaust ...
-
Manufactured by Dunphy Combustion Ltd.based in UNITED KINGDOM
Dunphy bespoke or standard burners are key components of high efficiency, low emission waste to energy bio gas systems. Our burners are ideal for standard incineration, bio gas and bio fuel heat and steam generation. We have international experience in designing and customising axial air flow, box and utility burners to match specific site conditions and the individual characteristics of waste ...
-
Manufactured by Clayton Industriesbased in USA
The SigmaFire line is available in sizes of 25 ,35, 50, 75, 100, 125, 150 and 200 BHP (245 to 1,962 kW) and has been designed from the ground up to offer an extensive list of benefits. Greatly Reduced Time and Expense for Installation. This is a result of modular construction of the main components—the Steam Generator, the Feedwater Tank and other Feedwater Equipment. Each of these ...
-
Manufactured by Piller Blowers & Compressors GmbHbased in GERMANY
Steam plays a key role in many industrial production processes – especially when it comes to thermal separation processes such as distillation, stripping, or evaporation. In spite of this, many businesses only use steam once and allow it to condense to control process pressure. This is throwing away energy in the heat of vaporization and required cooling water. There is however a solution: ...
-
Manufactured by Clayton Industriesbased in USA
Clayton's Fired Product line of steam generators ranges in size from 150 to 1,000 boiler horsepower (1,472 to 9,810 kW) and steam flows from 5,175 to 34,500 lbs. /hr (2,347 to 15,650 kg/hr). Pressure design ratings are available up to 3000 psig (207 barg). All the units are offered with fully modulating automatic PLC based controls and Siemens servo actuated burner management ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you