Steam Generators Equipment For Energy Management In USA
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
A compact, reliable source of steam for space and process heating, these immersion element boilers are virtually 100% energy efficient. They are completely packaged boilers ideally suited for applications requiring from 30 to more than 10,000 pounds of steam per hour. ACME Steam Generators are based on more than half a century of accumulated experience in the electric heating field. Easy and ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
Electrode boilers utilize the conductive and resistive properties of water to carry electric current and generate steam. An A.C. current flows from an electrode to one phase to the ground using the water as the ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
The model CEJS High Voltage Electrode Steam Boiler is the proven leader with more hours of operating experience over a wide range of applications than any competitor. The CEJS electrodes are vertically mounted around the inside of the pressure vessel which enables the CEJS to produce maximum amounts of steam in a minimum amount of floor ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
Manufactured by Clayton Industriesbased in USA
Clayton Heat Recovery Steam Generators are in operation around the world serving co-generation plants, thermal oxidizers, incinerators and many other applications. Systems are able to produce high pressure steam—up to 450 psig—as well as high temperature hot water. Clayton manufactures two types of heat recovery ...
-
Manufactured by Dekoron Unithermbased in USA
DEKORON/Unitherm Series 2200 pre-insulated tubing is a thermally insulated transport line suitable for steam, gas or liquid transport. The energy-efficient design meets OSHA personnel protection requirements by limiting the jacket surface temperatures to 140ºF (60ºC) or lower at 80ºF (26ºC) ambient conditions, while transporting 400ºF (204ºC) saturated steam. 2200 ...
-
Manufactured by Clean Energy Systems, Inc. (CES)based in USA
The typical GG400 consists of a pipe in pipe design with no moving parts made of high quality heat and corrosion resistant alloys. At the heart of the GG400 lies a 4" diameter platelet stack with its associated water, oxidizer, and fuel feeder system designed for the specific fuel qualities targeted in your project. The quench injector system consists of 12" sections typically spanning up to 6.5' ...
-
Manufactured by Langson Energy, Inc.based in USA
Langson Energy has developed exceptionally efficient and unique power conversion systems called “Total Flow GeneratorsTM” These Total Flow Generators TM are Turbo-Expanders used for all Gases (except Oxygen & Hydrogen). Our Turbo-Expander for Gases other than Steam is called the “Gas Letdown Generator” and the Turbo-Expander for Steam is affectionately referred to as ...
-
Manufactured by Clayton Industriesbased in USA
Clayton steam generators will normally fit in any available area while also reducing construction costs on new building ...
-
Manufactured by Anderson-Boldsbased in USA
Ideal for generating steam and heating gases and liquids in pressure vessels and tanks, flanged immersion heaters are hairpin-bent tubular elements welded or brazed into a flange and provided with electrical enclosures. Flanged immersion heaters are available in a wide selection of flange sizes and with a variety of electrical enclosures. Most units are UL-listed and CSA-certified or can have ...
-
Manufactured by OnPower, Incbased in USA
OnPower, Inc.’s Power Generation Packages incorporate the Siemens SGT-A05 family of Aeroderivative Industrial Gas Turbines, previously the Rolls-Royce Industrial 501-K. The more than 2,500 SGT-A05 Series industrial gas turbines installed around the world under Rolls-Royce and Siemens have accumulated over 65 million operating hours. This experience further demonstrates the dependability ...
-
Manufactured by Enerquipbased in USA
Thermal fluid heaters, also known as hot oil heaters, are used to heat fluids in a closed loop system. They work by using a heat transfer fluid, typically a mineral oil or synthetic oil, that is heated by a burner. The heated fluid then circulates through a closed loop system, transferring heat to the target material or ...
-
Manufactured by G.C. Broach Companybased in USA
The G.C. Broach Company has designed and manufactured over 50 waste heat recovery boilers. A waste heat boiler manufactured by The G.C. Broach Company is generally manufactured in accordance with “API 560 Fired Heaters for General Refinery Service” specifications and is usually ASME Section VIII Division One code stamped. Waste Heat Recovery Boilers are also referred to as ...
-
Manufactured by Industrial Boiler & Mechanicalbased in USA
IB&M is a distributor for Precision Boiler Company and offers a wide selection of new and used electric boilers that can be sized to meet your specific application requirements. Electric heating boilers generate steam for process purposes by converting electrical energy into thermal energy. ...
-
Manufactured by Boilerroom Equipment, Inc (BEI)based in USA
Steam accumulators are used for storing steam. The primary uses are for flattening out the pressure swings on boilers in a non-steady state type of operation or for use when a steam demand requires a large amount of steam for a relatively short period of time with a long time of no demand in between the demand cycles. Smaller and more economical boiler systems utilizing an accumulator can be ...
-
Manufactured by AirClean Energybased in USA
Skid-mounted steam turbine and direct-coupled induction generator. How Much Is Wasted Steam Pressure Costing You? If your facility is operating a steam boiler at a higher pressure than you need for your process, a steam turbine generator might save you hundreds of thousands of dollars on your electric bill. AirClean’s Indy STG is a modular, easy to install unit that provides an effective ...
-
Manufactured by Elliott Groupbased in JAPAN
Elliott steam turbine generators (STGs) offer an intelligent alternative for reliable, efficient and cost-effective on-site power generation. Our custom-designed STG sets support commercial energy requirements for continuous or standby power up to 50MW, including renewable energy applications and green energy initiatives. Elliott’s steam turbine designs incorporate industry standards such ...
-
Manufactured by Joseph Oat Corporationbased in USA
Joseph Oat’s experience and expertise in the design and manufacturing of shell and tube heat exchangers is well documented, and our renowned reputation in this art is well established internationally. Oat designs and fabricates heat exchangers in every configuration and size, from small units to units measuring over 144″ (3700 mm) in diameter and weighing up to 200 tons. Whether we ...
-
Distributed by Brad Thompson Companybased in USA
The pressing need to lower emissions from fossil power plants has focused worldwide attention on renewable sources of energy such as solar, wind, geothermal and biomass. Concentrated Solar Power (CSP) plants have emerged as strong contenders for alternate sources of energy. Rapid advances in mirror technology have slowly but steadily narrowed the gap in the capital investment between solar power ...
-
Manufactured by NEM HRSGsbased in NETHERLANDS
The industrial market for Heat Recovery Steam Generators is served through the department NEM-MHS. Within this department, a new product philosophy was launched; a modular HRSG design for gas turbines in the range from 20 up to 75 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you