Steam Loss | Energy XPRT
Articles & Whitepapers
-
An Emergency Request For A Steam Trap Testing Audit - Case Study
Challenge: Customer complained of high back pressure in their condensate system. He believed that the problem was failed steam traps. Solution: Bruce tested the 250 steam traps and found a failure rate of 23 percent. Around each steam trap was a bypass valve. Failed steam traps did indeed have a direct bearing on the problem he was called into solve: Abnormally High Back Pressure in the ...
-
Cumulative exergetic assessment of LPFO utilised steam boilers
This paper relates to a study on the energy and exergy resources, transfers, consumption and losses in the combustion and heat exchanging units of industrial steam boilers. Mass, energy and exergy ...
News
-
ASTM D513 - 11e1 Standard Test Methods for Total and Dissolved Carbon Dioxide in Water
Carbon dioxide is a major respiration product of plants and animals and a decomposition product of organic matter and certain minerals. The atmosphere averages about 0.04 vol % of CO2. Surface waters generally contain less than 10 ...
Equipment & Solutions
-
Showcase
Bosch Condensate service module CSM
- Secure use of condensate in steam boiler systems - Decreases in energy and water consumption due to reduced quantities of make-up water - Minimisation of flash steam losses, desalting and blowdown quantities; reduced consumption of chemicals - Reduced corrosion potential in the steam condensate system when using high-pressure condensate systems