Only show results in Connecticut? Ok

Steam Traps equipment for Energy Management

  • GEM Venturi Steam traps

    GEM traps have the revolutionary venturi orifice design, which enables them to perform the job of a steam trap without the need of moving parts. This means that GEM traps never fail. Like all orifice traps, the GEM steam traps used in the GEM Condensate Return System work by using the difference in density between steam and condensate. Condensate ...

    By SynTherm based in Almelo, NETHERLANDS.

  • Wireless Steam Trap Monitor

    Steam traps are mechanical devices installed on steam pipes to remove condensate; they are needed to maintain the proper operation of steam distribution systems. According to the U.S. Energy Information Administration, an average 15-20% of steam traps are leaking at any given time. Even a small steam trap can lose thousands of dollars per year ...

    By Cypress Envirosystems based in San Jose, CALIFORNIA (USA).

  • GEM Trap - Model Topaz - Hygienic Venturi Orifice Steam Trap

    The GEM Trap is a staged venturi orifice steam trap. It has no moving parts so will not wear and cannot fail. The unique venturi orifice technology utilises the expansion of the flash steam created by the pressure differential across the trap to control the flow of condensate. Operating over variable loads, the GEM Trap will suit all industrial ...

    By Thermal Energy International Inc. based in Ottawa, ONTARIO (CANADA). from GEM Steam Traps Products Product line

  • Steam Trap for Universal Connectors

    Maintenance-free, ultra-compact steam traps made from stainless steel, suitable for all UNIVERSAL (Swivel) connectors.Installation in any position.Integrated spiral wound gasket for connector.Only two screws make for a quick and easy installation.All steam trap units are optionally available with a UNIVERSAL connector (not fitted), e.g. UC 36, UCY ...

    By GESTRA - Flowserve Corporation based in Bremen, GERMANY. from Valve A1 Product line

  • DSC - Model 943 - Forged Inverted Bucket Steam Trap

    DSC Forged Steel Inverted Bucket Steam Traps Inverted Bucket Unit For Operating Pressure 69 Kg/Cm2 X 482℃. Excellent Resistance To Wear And Corrosion Resistance. Excellent Ability To Handle Dirt And Purge System. Small Dribble At No Load, Intermittent At Light And Normal Load, Continuous At Full Load. Vents Air And Co2 At Steam Temperature. ...

    By East Source Valve & Fitting CO .,LTD based in Taoyunan, TAIWAN. from DSC Inverted Bucket Steam Traps Product line

  • DSC - Cast Steel Inverted Bucket Steam Traps

    DSC Cast Steel Inverted Bucket Steam Traps Inverted Bucket Unit For Operating Pressure 41 Kg/Cm2 X 320℃. Excellent Resistance To Wear And Corrosion Resistance. Excellent Ability To Handle Dirt And Purge System. Small Dribble At No Load, Intermittent At Light And Normal Load, Continuous At Full Load. Vents Air And Co2 At Steam Temperature. ...

    By East Source Valve & Fitting CO .,LTD based in Taoyunan, TAIWAN. from DSC Inverted Bucket Steam Traps Product line

  • Model SK-55 - Mechanical Steam Traps

    Ayvaz SK-55 float steam traps especially perform continual evacuation at the steam saturation temperature. Ayvaz SK-55 doesn’t affect instantaneous and large pressure shift. SK-55 is mainly applied at the systems where the condensate is evacuated rapidly and it is also ideal for automatic temperature control system. Air and condensate ...

    By Ayvaz based in Arnavutköy, TURKEY. from Steam Traps Product line

  • Didion - High Quality Flash Recovery Vessels from Didion Separator

    When a portion of high pressure condensate that is discharged from the steam traps enters a low pressure area, a large percentage flashes into steam and can ideally be made use of again. A flash recovery vessel is often used as the area of lower pressure where the condensate flashes into steam. The flash steam exits out the top of the vessel, ...

    By Didion Separator based in Bellevue, OHIO (USA).

  • ATTSU - Model HH Series - Industrial Steam Boilers

    The HH boiler is a steam boiler that is horizontal, fire-tube with three passes and steam chamber. The chamber is completely cooled by boiler water. With steam production from 2 t/h to 20 t/h and thermal power from 1,516 kW to 15,117 kW.

    By ATTSU TERMICA S.L. based in Cerla, SPAIN. from Steam Boilers Product line

  • Prospect - Steam Technology

    The enterprise should depend on energy saving to survive. In all steam application industries, energy saving is throughout its whole process.. Hence, energy saving will be the outlook of steam technology development.

    By Synergy World Limited based in Hong Kong, CHINA. from Steam Product line

  • Delta - Model DSV - Venturi Steam Trap

    Delta Venturi Steam Traps Reduce boiler fuel costs Save steam, water and water treatment chemicals, they have no moving parts to maintain, they are constructed completely from stainless steel, they require no spare parts, testing or monitoring equipment, are guaranteed for 10 years and are not consumables and are designed to be durable.

    By Delta Steam Systems based in SOUTH AFRICA. from Delta DSV Venturi Steam traps Product line

  • Gas Turbine

    In Gas Turbine based Cogeneration is a natural gas (or diesel) turbine coupled with an electrical generator which produces electricity. The exhaust heat from the gas turbine is directed to a waste heat recovery boiler ('WHRB'). Here the heat from gases trapped and steam is produced. This steam can be used for process or for power generation. The ...

    By Anama Energies Pvt. Ltd. based in Pune, INDIA.

  • Steam Traps

    A steam trap is a device used to discharge condensate and non condensable gases with a negligible consumption or loss of live steam. Most steam traps are nothing more than automatic valves. They open, close or modulate automatically. The three important functions of steam traps are: Discharge condensate as soon as it is formed. Have a negligible ...

    By Robmet Srl based in Piatra Neamt- Roman, ROMANIA. from Equipments for Steam Product line

  • DSC - Model 1543 - Forged Steel Inverted Bucket Steam Traps

    DSC Forged Steel Inverted Bucket Steam Traps Inverted Bucket Unit For Operating Pressure 186 Kg/Cm2 X 540℃. Excellent Resistance To Wear And Corrosion Resistance. Excellent Ability To Handle Dirt And Purge System. Small Dribble At No Load, Intermittent At Light And Normal Load, Continuous At Full Load. Vents Air And Co2 At Steam Temperature. ...

    By East Source Valve & Fitting CO .,LTD based in Taoyunan, TAIWAN. from DSC Inverted Bucket Steam Traps Product line

  • Steamtraps & Filters

    TEMAK can offer every type of steam traps, for a big range of pressure or temperature: Ball float with thermostatic air vent, Thermodynamic, Bi-metallic thermostatic, Inverted bucket, Ballanced pressure thermostatic.

    By TEMAK S.A. based in Acharnes (Menidi) Attikis, GREECE. from Fluid Control Equipment - Valves Product line

  • Model LTD42 - Thermodynamic Steam Trap

    The Thermodynamic steam trap is popular with many buyers in the industry. Its ingenious operating principle is based on the physical Law of Bernouilli, which states that, in a moving medium, the total pressure is equal in all points. This pressure consists of static pressure and dynamic pressure and the increase of one of the components results in ...

    By CDB Engineering Spa based in Casalpusterlengo (LO), ITALY. from Steam Trap and Steam Equipment Product line

  • Non-Electric Pumps

    Spirax Sarco offers a complete range of mechanical fluid pumps specifically designed to remove and recover condensate under all operating conditions, optimizing plant efficiency and product quality throughout your plant.

    By Spirax Sarco Inc. based in Blythewood, SOUTH CAROLINA (USA). from Condensate Pumps Product line

  • Safna - Model Series ESES - Unfired Steam Generators

    SAFNA's unfired steam generator is designed to produce clean chemical-free steam for numerous applications. Whenever there is a critical need for plenty of steam for food processing, pharmaceuticals, electronics, etc., the ESES unfired steam generator satisfies the requirement. Input and output streams are isolated thereby eliminating cross ...

    By SAFNA Engineering and Consulting based in Arcadia, CALIFORNIA (USA). from Heat Exchangers Product line

  • GEM - Model Opal - Line Drainage Venturi Orifice Steam Trap

    The GEM Trap is a low maintenance steam trap with no moving parts; it will not wear and is performance guaranteed* on saturated steam for 10 years. The unique venturi orifice technology utilises the expansion of the flash steam created by the pressure differential across the trap to control the flow of condensate. Operating over variable loads, ...

    By Thermal Energy International Inc. based in Ottawa, ONTARIO (CANADA). from GEM Steam Traps Products Product line

  • GEM Trap - Model Ruby - Flanged Process Venturi Orifice Steam Trap

    The GEM Trap is a staged venturi orifice steam trap. It has no moving parts so will not wear and cannot fail. The unique venturi orifice technology utilises the expansion of the flash steam created by the pressure differential across the trap to control the flow of condensate. Operating over variable loads, the GEM Trap will suit all industrial ...

    By Thermal Energy International Inc. based in Ottawa, ONTARIO (CANADA). from GEM Steam Traps Products Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you