Steam Traps Equipment For Energy Management Available In Australasia
-
ShowcaseManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The DSV Venturi Steam Traps are designed for multipurpose applications from line drainage, trace heating, through to medium heat exchanger ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta DSV Venturi Steam Trap is designed for multipurpose applications from line drainage and trace heating, through to small to medium heat exchanger applications. The trap has a primary and secondary integrated strainer and a removable venturi insert. The body of the trap does not have to be removed from the line for maintenance purposes. Access to the insert and both primary and secondary ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta nHRi Venturi Steam Trap is designed for high-load process applications including heat exchangers, reboilers, BJSIFBUFST, etc. The nHRi has a removable insert. " strainer DBObe fitted upstream of the ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The DSV-UC Venturi Steam Trap with floating universal connector has been specifically designed for trace heating and line drainage applications as well as small to medium heat exchanger applications. The two-bolt floating universal connector system is a permanent replacement venturi orifice steam trap that will fit onto any standard universal connector flange. With primary and secondary ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta DSV25 Venturi Steam Trap is designed for multipurpose applications from line drainage and trace heating, through to medium to large process applications. The DSV25 has an integrated strainer and an in-line removable venturi insert. The body of the DSV25 does not have to be removed from the line for maintenance purposes. Access to the insert and strainers is through the top and bottom ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta SCi Venturi Steam Trap is designed for medium to large process applications including heat exchangers, reboilers, air heaters, etc. The Delta SCi has a removable venturi insert. A strainer can be fitted upstream of the trap. ...
-
Manufactured by ISIEVI Makina San. Tic. Ltd. Sti.based in TURKEY
When designing steam-based heating systems, a deep knowledge of various subjects is required, namely the design of heat exchangers, the properties of steam and condensate, the types of control valves and their selection, the selection of steam traps or pump traps, as well as automation and temperature control. HeatPack is a system engineered with the aforementioned expertise. Its design and ...
-
Manufactured by Thermal Energy International Inc.based in CANADA
The GEM Trap is a staged venturi orifice steam trap. It has no moving parts so will not wear and cannot fail. The unique venturi orifice technology utilises the expansion of the flash steam created by the pressure differential across the trap to control the flow of condensate. Operating over variable loads, the GEM Trap will suit all industrial applications. The single piece bodies are ...
-
Manufactured by VYC Industrial, SAUbased in SPAIN
Thermodynamic steam traps without filter for the extraction of steam condensates. For use in: steam piping, irons, laundries, tanks and vessels with condensate discharge, multiple plate presses, vulcanizing autoclaves, pressure reduction equipment, ...
-
based in USA
Our ProTech Radiator Steam Trap Retrofit Insert Kits are designed to replace the internals of your existing radiator-type steam traps. These kits boast the same great benefits as the ProTech Steam Trap Replacement Device, including: CANNOT FAIL IN THE OPEN POSITION, thus preventing energy waste and protecting your system. Restores condensate back pressure and temperature to design levels. ...
-
Manufactured by SMART Valves Inc.based in USA
The SMART SVT DN25 Venturi Steam Trap is designed for multipurpose applications from mainline drainage and trace heating, through small to large size heat-exchanger process applications. The trap has an integrated bottom strainer with 25% increased capacity and a removable venturi insert. The body of the steam trap does not have to be removed from the line for maintenance purposes. Access to the ...
-
based in USA
Traditional steam traps rely on an opening and closing cycle to allow condensate to pass but prevent steam from doing so as well. They are purposely oversized for the intended applications so that they may be sold with little, if any, technical or application support required. It is not uncommon for a trap to have a capacity for hundreds of pounds of condensate per hour when the actual load is ...
-
Manufactured by SDT Ultrasound Solutionsbased in BELGIUM
TRAPChecker is an ultrasound solution designed to assess the condition of steam traps and valves. ...
-
Manufactured by VYC Industrial, SAUbased in SPAIN
Thermodynamic steam trap with filter for the extraction of steam condensates. For use in: steam piping, irons, laundries, tanks and vessels with condensate discharge, multiple plate presses, vulcanizing autoclaves, pressure reduction equipment, ...
-
Manufactured by VYC Industrial, SAUbased in SPAIN
Thermodynamic steam traps without filter for the extraction of steam condensates. For use in: steam piping, irons, laundries, tanks and vessels with condensate discharge, multiple plate presses, vulcanizing autoclaves, pressure reduction equipment, ...
-
Manufactured by Pelltech OÜbased in ESTONIA
Pelltech Public range burners are fully compatible with oil and steam boilers, baking ovens, driers and other similar systems that require cost effective and sustainable heating solutions. The burners are self cleaning with automated ash removal system. Installation and setup of PV50b burner is simple and straightforward because it uses an ordinary 90mm oil burner flange and standard oil burner ...
-
Manufactured by Thermal Energy International Inc.based in CANADA
The GEM Trap is a staged venturi orifice steam trap. It has no moving parts so will not wear and cannot fail. The unique venturi orifice technology utilises the expansion of the flash steam created by the pressure differential across the trap to control the flow of condensate. Operating over variable loads, the GEM Trap will suit all industrial applications. The single piece bodies are ...
-
Manufactured by VYC Industrial, SAUbased in SPAIN
Thermodynamic steam trap with for the extraction of steam condensates. For use in: steam piping, irons, laundries, tanks and vessels with condensate discharge, multiple plate presses, vulcanizing autoclaves, pressure reduction equipment, ...
-
Manufactured by G-Team, a.s.based in CZECH REPUBLIC
GESTRA Flowserve steam traps, Float steam traps, Thermostatic steam traps with bimetallic ...
-
Manufactured by Steam Equipments Pvt Ltd (SEPL)based in INDIA
Thermodynamic traps work on the difference in dynamic response to velocity change in the flow of compressible and in-compressible fluids. As steam enters, static pressure above the disk forces the disk against the valve seat. The static pressure over a large area overcomes the high inlet pressure of the steam. As the steam starts to condense, the pressure against the disk lessens and the trap ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you