Steam Trap (Steam Traps) Equipment
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta SCi Venturi Steam Trap is designed for medium to large process applications including heat exchangers, reboilers, air heaters, etc. The Delta SCi has a removable venturi insert. A strainer can be fitted upstream of the trap. ...
-
ShowcaseManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The DSV Venturi Steam Traps are designed for multipurpose applications from line drainage, trace heating, through to medium heat exchanger ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The DSV-UC Venturi Steam Trap with floating universal connector has been specifically designed for trace heating and line drainage applications as well as small to medium heat exchanger applications. The two-bolt floating universal connector system is a permanent replacement venturi orifice steam trap that will fit onto any ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta nHRi Venturi Steam Trap is designed for high-load process applications including heat exchangers, reboilers, BJSIFBUFST, etc. The nHRi has a removable insert. " strainer DBObe fitted upstream of the ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta DSV25 Venturi Steam Trap is designed for multipurpose applications from line drainage and trace heating, through to medium to large process applications. The DSV25 has an integrated strainer and an in-line removable venturi insert. The body of the DSV25 does not have to be removed from the line for maintenance purposes. ...
-
PremiumManufactured by Delta Steam Systems (DSS)based in SOUTH AFRICA
The Delta DSV Venturi Steam Trap is designed for multipurpose applications from line drainage and trace heating, through to small to medium heat exchanger applications. The trap has a primary and secondary integrated strainer and a removable venturi insert. The body of the trap does not have to be removed from the line for ...
-
Manufactured by TLV International, Inc.based in JAPAN
A reliable and durable stainless steel steam trap with tight shut-off for use on small-size process equipment. Self-modulating free float provides continuous, smooth, low velocity condensate discharge as process loads vary. Precision-ground float, constant water seal and three-point seating design ensure a steam tight seal, even under ...
-
Manufactured by Schwietzke Armaturen GmbHbased in GERMANY
Thermostatic and thermo-dynamic steam traps, Ball float traps, Plunger valves, Flow through sight glasses. Cast Iron, Steel, Stainless Steel. DN 15 - 150, G 1⁄4 - 2, PN 6 - 640, ANSI class 150 - ...
-
Manufactured by G-Team, a.s.based in CZECH REPUBLIC
GESTRA Flowserve steam traps, Float steam traps, Thermostatic steam traps with bimetallic ...
-
Distributed by Valutech Inc.based in CANADA
Flowserve Gestra Steam Trap Steam traps play a vital role in discharging condensate produced as a result of trapped steam in a heating system. Three types of steam traps. BK: The BK trap is a thermostatic trap with a bimetallic ...
-
Manufactured by Robmet Srlbased in ROMANIA
A steam trap is a device used to discharge condensate and non condensable gases with a negligible consumption or loss of live steam. Most steam traps are nothing more than automatic valves. They open, close or modulate automatically. The three important functions of steam traps ...
-
Manufactured by Axelvalves ABbased in SWEDEN
AXELVALVES ALT-1 Steam Traps are manufactured to the highest quality and standards. Built to customer requirements for special applications and severe service ...
-
Manufactured by Uni Klinger Limited( UKL)based in INDIA
Steam has two components: 1] the latent heat useful in process for Heat transfer, and 2] the Sensible heat in the form of condensate having only the heat content not useful in process, rather hindering Heat transfer and causing damage to piping equipment due to its presence. Hence, there is need to remove condensate and trapped steam. This is ...
-
Manufactured by Ayvazbased in TURKEY
Ayvaz SK-51 float steam traps especially perform continual evacuation at the steam saturation temperature. Ayvaz SK-51 doesn’t affect instantaneous and large pressure shift. SK-51 is mainly applied at the systems where the condensate is evacuated rapidly and it is also ideal for automatic temperature control system. Air and ...
-
Manufactured by Steamloc Internationalbased in BELGIUM
In 1984 our engineering improved a less-known technique to separate liquid phases from gas phases in general. The main principle is based on venturi technology. With the focus on steam installations, this technology permits highly economic condensate removal from all kind of steam applications. The absence of any moving parts generates ...
-
Manufactured by Steam Equipments Pvt Ltd (SEPL)based in INDIA
Thermodynamic traps work on the difference in dynamic response to velocity change in the flow of compressible and in-compressible fluids. As steam enters, static pressure above the disk forces the disk against the valve seat. The static pressure over a large area overcomes the high inlet pressure of the steam. As the steam starts ...
-
Manufactured by SMART Valves Inc.based in USA
The SMART SVT DN25 Venturi Steam Trap is designed for multipurpose applications from mainline drainage and trace heating, through small to large size heat-exchanger process applications. The trap has an integrated bottom strainer with 25% increased capacity and a removable venturi insert. The body of the steam ...
-
Manufactured by Ayvazbased in TURKEY
Ayvaz SK-55 float steam traps especially perform continual evacuation at the steam saturation temperature. Ayvaz SK-55 doesn’t affect instantaneous and large pressure shift. SK-55 is mainly applied at the systems where the condensate is evacuated rapidly and it is also ideal for automatic temperature control system. Air and ...
-
Manufactured by SMART Valves Inc.based in USA
The SMART SVT DN15/20 Venturi Steam Trap is designed for multipurpose applications from mainline drainage and trace heating, through small to medium size heat-exchanger process applications. The trap has integrated strainers and a removable venturi insert. The body of the steam trap does not have to be removed ...
-
Distributed by SynThermbased in NETHERLANDS
GEM traps have the revolutionary venturi orifice design, which enables them to perform the job of a steam trap without the need of moving parts. This means that GEM traps never fail. Like all orifice traps, the GEM steam traps used in the GEM Condensate Return System work by ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you