Steam Traps Equipment For Energy Management In Canada
-
Manufactured by Thermal Energy International Inc.based in CANADA
The GEM Trap is a staged venturi orifice steam trap. It has no moving parts so will not wear and cannot fail. The unique venturi orifice technology utilises the expansion of the flash steam created by the pressure differential across the trap to control the flow of condensate. Operating over variable loads, the GEM Trap will suit all industrial applications. The single piece bodies are ...
-
Distributed by Valutech Inc.based in CANADA
Flowserve Gestra Steam Trap Steam traps play a vital role in discharging condensate produced as a result of trapped steam in a heating system. Three types of steam traps. BK: The BK trap is a thermostatic trap with a bimetallic regulator which is particularly robust. MK: The MK trap is a thermostatic trap with a membrane regulator and has very sensitive response characteristics. UNA: The UNA is a ...
-
Manufactured by Thermal Energy International Inc.based in CANADA
The GEM Trap is a staged venturi orifice steam trap. It has no moving parts so will not wear and cannot fail. The unique venturi orifice technology utilises the expansion of the flash steam created by the pressure differential across the trap to control the flow of condensate. Operating over variable loads, the GEM Trap will suit all industrial applications. The single piece bodies are ...
-
Manufactured by SDT Ultrasound Solutionsbased in BELGIUM
TRAPChecker is an ultrasound solution designed to assess the condition of steam traps and valves. ...
-
Manufactured by Thermal Energy International Inc.based in CANADA
The GEM Trap is a staged venturi orifice steam trap. It has no moving parts so will not wear and cannot fail. The unique venturi orifice technology utilises the expansion of the flash steam created by the pressure differential across the trap to control the flow of condensate. Operating over variable loads, the GEM Trap will suit all industrial applications. The single piece bodies are ...
-
Manufactured by Ecorad Canada Incbased in CANADA
This model was manufactured by American Radiators CO. from 1897 until 1905. The head of the radiator has ears with spirals and a shell design in the middle, it was cast all over the United States at various foundries. Fully restored with new joints, this cast iron radiator is ready to be installed on your central ...
-
Manufactured by Ecorad Canada Incbased in CANADA
This model was manufactured by American Radiators CO. from 1897 until 1905. The head of the radiator has small ears and the design is very fine with rubans and leaves, it was cast all over the United States at various foundries. Fully restored with new joints, this cast iron radiator is ready to be installed on your central ...
-
Manufactured by Vapor Power Internationalbased in USA
The Modulatic Steam Generator is a once through watertube boiler with a positive displacement pump to provide a constant supply of feedwater. The burner management system controls the amount of feedwater admitted to the coils by regulating the speed of the pump, based on the steam pressure set point compared to the actual reading. The fuel-air ratio curve changes the amount of fuel and combustion ...
-
Manufactured by Vapor Power Internationalbased in USA
The HI-R-Temp thermal fluid heater is a forced circulation coil type thermal fluid heater in which fluid circulates through a set of coils. More efficient than helical coil type heaters, the HI-R-Temp® thermal fluid heater coils are parallel connected and have a minimum of seven concentric layers. The pump is sized specific to the flow rate and pressure drop requirements of each ...
-
Distributed by Steam Cloud Engineeringbased in CANADA
The DSV Venturi Steam Traps are designed for multipurpose applications from line drainage, trace heating, through to medium heat exchanger applications. The body of the trap does not have to be removed from the line for maintenance purposes. Access to the insert and both primary and secondary strainers is via the top and bottom caps. * Typical Payback - 0 to 6 months * Reduce fuel costs by ...
-
Manufactured by Thermal Energy International Inc.based in CANADA
The GEM Trap is a staged venturi orifice steam trap. It has no moving parts so will not wear and cannot fail. The unique venturi orifice technology utilises the expansion of the flash steam created by the pressure differential across the trap to control the flow of condensate. Operating over variable loads, the GEM Trap will suit all industrial applications. The single piece bodies are ...
-
Manufactured by Thermal Energy International Inc.based in CANADA
The GEM Trap is a staged venturi orifice steam trap. It has no moving parts so will not wear and cannot fail. The unique venturi orifice technology utilises the expansion of the flash steam created by the pressure differential across the trap to control the flow of condensate. Operating over variable loads, the GEM Trap will suit all industrial applications. The single piece bodies are ...
-
Manufactured by Ecorad Canada Incbased in CANADA
The Fig Leaves model was manufactured in USA, back in early 1900. The design shows flowers and leaves and is mainly found in the Detroit, MI area. Fully restored with new joints, this cast iron radiator is ready to be installed on your central system. Includes: 1/8in hole for steam trap installation. reducers size of your choice. inlet/outlet location of your ...
-
Manufactured by Thermal Energy International Inc.based in CANADA
The GEM Trap is a staged venturi orifice steam trap. It has no moving parts so will not wear and cannot fail. The unique venturi orifice technology utilises the expansion of the flash steam created by the pressure differential across the trap to control the flow of condensate. Operating over variable loads, the GEM Trap will suit all industrial applications. The single piece bodies are ...
-
Manufactured by Armstrong International Inc.based in USA
For pressures to 400 psig (28 bar) . . . Cold water capacities to 4800 lb/hr (2175 kg/hr). SH Series Superheat Steam Traps operate by the effect that rising temperature has on the thermostatic bimetallic ...
-
Manufactured by Thermal Energy International Inc.based in CANADA
The GEM Trap is a low maintenance steam trap with no moving parts; it will not wear and is performance guaranteed* on saturated steam for 10 years. The unique venturi orifice technology utilises the expansion of the flash steam created by the pressure differential across the trap to control the flow of condensate. Operating over variable loads, the GEM Trap will suit all industrial applications. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you