Steam Turbines Manufacturers (Energy Management)
-
Manufacturerbased in Tehran, IRAN
MAPNA Turbine (TUGA), intends to produce 33 Turbines, 5300 MW in total, including gas turbines (Type V94.2-5 with 162 MW capacity) and Steam turbines (Type E30-16-1*6.3 with 160 MW capacity) under SIEMENS license, and provides required auxiliaries ...
MAPNA - Model 160 MW - Steam Turbine
Knowing the time, money and effort that must be consumed for maintenance and overhauls, most customers are eager to buy machines that are robust enough to with stand difficult working conditions and still be available to keep on making electrical ...
CONTACT SUPPLIER -
Manufacturerbased in Caronno Pertusella, ITALY
BCE – Burners and Combustion Equipment – srl is a limited liability company registered in Italy since 1987, with offices in via Santa Margherita 450, 21042 Caronno Pertusella (Varese) – Italy. BCE is manufacturing a wide range of industrial burners, ...
-
Manufacturerbased in New York, NEW YORK (USA)
Founded in 1965, Toshiba America, Inc. (TAI) is a subsidiary of Tokyo-based Toshiba Corporation and the holding company of six Toshiba operating companies that offer a broad range of products and solutions for the residential, commercial, and ...
-
Manufacturerbased in Munich, GERMANY
Siemens Energy is one of the world’s leading energy technology companies. The company works with its customers and partners on energy systems for the future, thus supporting the transition to a more sustainable world. With its portfolio of products, ...
Siemens Energy - Model SST-5000 - Utility Steam Turbine Package
A steam turbine with short start-up times and variable start-up modes to ensure grid stability. Siemens Energy Steam Turbines of the SST-5000 series are operated in combined cycle power plants (CCPP) and in steam power plants (SPP). The SST-5000 ...
CONTACT SUPPLIER -
Manufacturerbased in Jerusalem, ISRAEL
BrightSource, the CSP pioneer, combines breakthrough solar technologies with advanced storage, implementation and optimization capabilities to harness and manage renewable energy resources and provide the power required to meet the world’s growing ...
-
Manufacturerbased in Wakdewadi, INDIA
Thermax designs, builds and commissions large boilers for steam and power generation, turnkey power plants, industrial. Thermax provide solutions for municipal wastewater treatment plants, waste heat recovery systems and air pollution control ...
-
Manufacturerbased in Pune, INDIA
Turtle Turbines is a Steam Turbine Manufacturer in India Serving 18 Industry Segments in More Than 10 Countries Since 20 Years. 20 years ago an idea was born and a question was asked, how to generate Green Power that is commercially viable? Since ...
Turtle - Model TORUS MLT - Petro - Turbine for Ethanol Distilleries
High Efficiency: Optimised Multistage Turbine designed for highest in its class efficiency delivering maximum power at given Steam Parameters. Continuous Duty Turbine: Continuous duty Steam Turbine designed to operate 24×7. Available to ...
CONTACT SUPPLIER -
Manufacturerbased in Silkeborg, DENMARK
Focus BioEnergy is an engineering and project company, which helps our customers with renewable energy solutions within steam and CHP (Combined Heat and Power), that creates a healthy and sustainable economy. This is done by advising on and ...
Delta - Model 10, 12,5 and 15 MW - Larges Size Predesigned Boiler System
The Delta model is the larges size predesigned boiler system in Focus BioEnergy standard program. There are only a small difference between a Delta model boiler and the smaller Charlie model ...
CONTACT SUPPLIER -
Manufacturerbased in Galax, VIRGINIA (USA)
Hansen Turbine manufactures steam turbine, gas turbine and axial flow compressor components and can coat them, for the repair and maintenance of rotating power equipment. Hansen Turbine simplifies repairs, allowing your shop to free up money, ...
Hansen Turbine - Steam Turbine Blading
Hansen Turbine helps steam turbine customers avoid mistakes and costly project delays. Our experienced team of engineers verifies the accuracy of customer supplied data and drawings. Discrepancy and error findings are resolved with customer ...
CONTACT SUPPLIER -
Manufacturerbased in Tokyo, JAPAN
Shin Nippon Machinery Co., Ltd. will bring a new excitement and an affluent life to people around the world through continuous innovations in technology. World demand for energy is projected to continue its growth, while at the same time rigorous ...
Shin Nippon - Model Type C - Condensing Multistage Steam Turbine
With turbine exhaust pressure a vacuum, the condensing multistage turbine is a high-efficiency, high output model capable of fully converting the thermal energy of steam to velocity, without loss. This series of products are known as 'multistage' ...
CONTACT SUPPLIER -
Manufacturerbased in Gothenburg, SWEDEN
Babcock & Wilcox Vølund AB provides flue gas cleaning and flue gas condensation solutions with the highest standards of performance and availability for waste and biofuel-fired ...
-
Manufacturerbased in Cerritos, CALIFORNIA (USA)
Thermal Engineering International-TEi- has installations across the globe and is backed by more than 165 years of experience in the design and manufacture of high quality Pressure Vessels and Heat Transfer Equipment for the power generation and ...
Feedwater Heaters
Feedwater Heater systems can extract up to 30% of the turbine throttle steam. The intelligent use of this energy source is critical for efficient generation of electric power. Owners, operators and engineers look to TEi for the most efficient and ...
CONTACT SUPPLIER -
Manufacturerbased in Hyderabad, INDIA
Sreem Serba Turbines Pvt. Ltd. (SST) specializes in manufacturing of custom designed steam turbines up to 10MW. SST is based at Hyderabad, India. Our Products are reliable, cost effective and efficient with good quality, to meet requirements of ...
SST - Saturated Turbines
The turbo set consists of a back-pressure turbine with an asynchronous or synchronous generator. The entire turboset designed as a compact unit installed on a common base frame requires minimum maintenance. This equipment can also replace a pressure ...
CONTACT SUPPLIER -
Manufacturerbased in Karachi, PAKISTAN
Syngas, Biogas, Hydrogen and Synfuels Production Company. CREECO is first of its nature SECP incorporated company in Pakistan for manufacturing and production of equipment for SYNGAS. Syngas, or synthesis gas, is a fuel gas mixture consisting ...
-
Manufacturerbased in Wheeling, ILLINOIS (USA)
Since Indeck’s inception over five decades ago, we have progressed into the go-to boiler manufacturer for comprehensive boiler and auxiliary equipment inventory and rentals. We design and manufacture industrial boiler systems that include power ...
Indeck - Economizers
Indeck’s economizers capture waste heat and recirculate this energy back into the boiler system through the boiler’s feedwater. This heat exchange process reduces the energy needed to heat the boiler system-saving on fuel and operational ...
CONTACT SUPPLIER -
Manufacturerbased in Nyköping, SWEDEN
WTS main business is powder burners, multi-fuel burners for powder, oil, and gas. WTS AB is a Swedish burner manufacturing company specialized in wood powder / dust combustion and operating world wide. Our specialty is to convert oil, gas or coal ...
-
Manufacturerbased in Kiel, GERMANY
LAWI Engineering is specialized and has long-term experience in the design and construction of solid biomass power plants. Founded in 1996 in Kiel/Germany, LAWI Engineering has become one of the technology leading enterprises in designing and ...
LAWI EtaPlant - Model C Series - Steam Power Plant
LAWI Engineering’s innovative steam power plant concept – the LAWI EtaPlant-C- is an outstanding breakthrough in the economical and ecological use of solid biomass and other solid waste fuels such as MSW. In combination with ...
CONTACT SUPPLIER -
Manufacturerbased in Bangalore, INDIA
NCON Turbo Tech Pvt. Ltd. is one of India's premier Steam Turbine manufacturers. True to its name ('NCON' stands for eNergy CONservation), the company for over 30 years has been manufacturing world class Steam Turbines and Spare Parts that provide ...
NCON - Multi-Stage Steam Turbines
Highly Efficient, Robust, Reliable, Proven uptime of over 99%, Back-Pressure and Condensing, Controlled or Uncontrolled ...
CONTACT SUPPLIER -
Manufacturerbased in Canonsburg, PENNSYLVANIA (USA)
At Westinghouse, our mission is to power meaningful lives by providing sustainable energy and reliable appliances, lighting, and electronics for the home. As the company that brought power to America over 100 years ago, we strive to improve everyday ...
-
Manufacturerbased in Chiba-Ken, JAPAN
Companies around the world choose Elliott Group to design, manufacture, and service their critical turbo Machinery. For more than 100 years, Elliott has been synonymous with innovative engineering, highly reliable products, and unwavering commitment ...
Elliott - Steam Turbine-Generators
Elliott steam turbine generators (STGs) offer an intelligent alternative for reliable, efficient and cost-effective on-site power generation. Our custom-designed STG sets support commercial energy requirements for continuous or standby power up to ...
CONTACT SUPPLIER
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you