Steam Turbines Equipment For Energy Management In Africa
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Titan 130 gas turbine two-shaft for compressor and mechanical drive applications is designed to deliver a simple-cycle thermal efficiency of 36 ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
For the past 45 years, ACME-AEP has manufactured the key components of auxiliary boiler systems, namely boilers, superheaters, secondary pressure vessels, and associated control systems. Power generation projects require an auxiliary boiler system to provide steam on start-up, during maintenance shut-downs, steam turbine gland systems, ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Titan™ 130 gas turbine two-shaft for compressor and mechanical drive applications is designed to deliver a simple-cycle thermal efficiency of 36 ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
ORC technology is based on the widely known and proven Rankine Cycle principle. It was named after William John Macquorn Rankine, a Scottish polymath and Glasgow University professor. The Rankine cycle is a cycle that converts heat into energy. The heat is supplied externally to a closed ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhausting gas by passing them either through a gas tube heat exchanger or across a radiant tube boiler. Energy is exchanged between the gases and water to produce steam for heating or industrial processing. When used for electrical power production, the steam is further heated within a super-heater to produce a dry steam to drive a ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
-
by EGYPTROLbased in EGYPT
Examples of Steam Turbine systems we test, commission, optimize, service and ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
High levels of power requirement and rising energy costs represent a major challenge for the steel industry. Gases created as a ‘free’ by-product during steel production processes serve as an attractive energy source option for efficient power generation. In addition to the economic benefit, using these gases as engine fuel reduced industrial CO2 emissions and saves natural energy ...
-
Manufactured by Forney Corporationbased in USA
Forney in Conjunction with Storm Technologies brings you the Eagle Air II Burner! Need the ability to fire both coal or natural gas so your plant can take advantage of the most cost effective fuel option? Eagle Air II is a Wall-Fired-Boiler Dual-Fuel Burner that gives you that ...
-
Manufactured by Process Systemsbased in FRANCE
We design and manufacture shell and heat exchangers and condensers for the power industry. For more than 40 years PROCESS SYSTEMS has designed, manufactured, installed and started up heat exchangers in all types of material (carbon steel, stainless steel, refractories, Inconel, titanium, bronze and cupro-nickel). We manufacture equipment for the power performance optimisation of the water/steam ...
-
Manufactured by Garioni Naval - a brand of SVECOM PE Srlbased in ITALY
Over 5000 units installed in every field of industry, from laundries to large chemical pharmaceutical, textile and mechanical factories have brillantly solved the problem of steam production at low costs. In the range of the model for producing steam power from 120 up to 8000 Kg/h, you can find the most suitable for your needs or realize high power plants with several units working ...
-
Manufactured by SAACKE GmbHbased in GERMANY
The special spherical shape of the furnace top plate gives an increased stability against ship vibrations and protects this part of the boiler against partial overheating, because residues in the boiler water are led to the downcomer connections on the periphery of the drum before they can accumulate on the furnace top ...
-
Manufactured by Conax Technologiesbased in USA
Exhaust Gas Sensors and Blade Path Sensors: These type K ungrounded thermocouples are manufactured using Special (+/-0.4%) limits and have a time response of 1.7 to 4.0 seconds depending on the tip configuration. Conax Technologies manufactures these exhaust thermocouples with tip diameters from .062 diameter to .125. They are used on all heavy duty gas turbines and are of the latest ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you