Steam Turbines Equipment For Energy Management In USA
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhausting gas by passing them either through a gas tube heat exchanger or across a radiant tube boiler. Energy is exchanged between the gases and water to produce steam for heating or industrial processing. When used for electrical power production, the steam is further heated within a super-heater to produce a dry steam to drive a ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
For the past 45 years, ACME-AEP has manufactured the key components of auxiliary boiler systems, namely boilers, superheaters, secondary pressure vessels, and associated control systems. Power generation projects require an auxiliary boiler system to provide steam on start-up, during maintenance shut-downs, steam turbine gland systems, ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Titan™ 130 gas turbine two-shaft for compressor and mechanical drive applications is designed to deliver a simple-cycle thermal efficiency of 36 ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Titan 130 gas turbine two-shaft for compressor and mechanical drive applications is designed to deliver a simple-cycle thermal efficiency of 36 ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The Current Transformers for with your 3 Phase Power Meter to measure power consumption! Select one per phase to be ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. ...
-
Manufactured by AltaRock Energy, Inc.based in USA
Geothermal power is a reliable, clean source of power that provides baseload electricity 24/7 rain or shine. Geothermal power plants have the least down-time of any source of power including coal, gas, oil, hydro, solar, wind, or nuclear. Geothermal plants emit only a tiny fraction of the emissions that fossil fuel powered plants do, and there is a seemingly endless amount of heat near the ...
-
based in USA
The 9E gas turbine is GE's robust and proven 50 Hz workhorse. With more than 600 units shipped, it has accumulated over 23 million hours of utility and industrial service-often in arduous climates ranging from desert heat and tropical humidity to arctic cold. 9E gas turbine systems are also designed for reliable operation and minimal maintenance at a competitively low installed cost. The 9E gas ...
-
Manufactured by GE Power & Waterbased in USA
GE’s D-Series is a modular product platform for utility reheat steam turbines in the 100 to 1,200 MW power output ...
-
Manufactured by PBS Velká Bíteš, a.s.based in CZECH REPUBLIC
In addition to delivering its own turbines, main condenser and its pumps, PBS also provides a complete condensate management system. If requested by the customer, it also provides the exhaustion of steam from the ...
-
Manufactured by Benko Products, Inc.based in USA
The Perfect Solution for Heating a Single 55 Gallon Drum, using the Power of Steam. The Benko Products SAHARA HOT BOX line of drum heaters and ovens are recognized as the industry leader in 55-gallon drum heating equipment. Our Steam Drum Heaters and Drum Ovens are available with state-of-the-art digital controls with independent over-temperature protection. Units in a manifolded arrangement can ...
-
Manufactured by Inpro/Sealbased in USA
Permanently protect steam turbine bearings in both high and low temperature environments. Inpro/Seal Steam Turbine Bearing Isolators utilize multiple features to ensure effective and permanent bearing protection against contamination ingress and lubrication loss on process steam turbines. They can be custom engineered to meet the requirements of your application and operating ...
-
Manufactured by Eugen Arnold GmbHbased in GERMANY
The efficient insulation of steam turbines requires professional expertise and special know-how. So rely on ARNOLD, the world's leading partner for the design, manufacture and assembly of high quality turbine insulation systems that can handle even the toughest ...
-
Manufactured by OnPower, Incbased in USA
OnPower, Inc.’s Power Generation Packages incorporate the Siemens SGT-A05 family of Aeroderivative Industrial Gas Turbines, previously the Rolls-Royce Industrial 501-K. The more than 2,500 SGT-A05 Series industrial gas turbines installed around the world under Rolls-Royce and Siemens have accumulated over 65 million operating hours. This experience further demonstrates the dependability ...
-
Manufactured by Easy Energy Systems, Incbased in USA
The Easy Energy Auto Segmentation System™ is a patented, self-contained, and fully automated processing system for converting agricultural biomass, waste wood, forest fire prone dead trees, municipal garbage into many different valued added products while also sequestering large amounts of CO2. All modules are pre-fabricated and tested in a factory. They can be shipped anywhere in the ...
-
Distributed by Brad Thompson Companybased in USA
The pressing need to lower emissions from fossil power plants has focused worldwide attention on renewable sources of energy such as solar, wind, geothermal and biomass. Concentrated Solar Power (CSP) plants have emerged as strong contenders for alternate sources of energy. Rapid advances in mirror technology have slowly but steadily narrowed the gap in the capital investment between solar power ...
-
Manufactured by Brüel & Kjær Vibrobased in GERMANY
What makes VC-8000 stand out? Better technology, better reliability, and better value. This is why we garnered Frost & Sullivan’s 2014 Customer Value Leadership Award! VC-8000 can provide custom designed systems for continuous machinery monitoring that fit your specific needs. We can assist you with every type of machine – pumps, fans, blowers, steam and gas turbines, hydro turbines, ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
For those geothermal resources with a temperature generally above 190ºC, a single-flash type of plant is often the best economic choice. Higher temperature reservoirs will typically produce both water and steam under natural pressure. This two-phase flow is usually directed to a separator that allows the steam fraction to be piped to the plant and the water fraction to be piped back into the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you