Steam Turbines Equipment For Energy Management
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. This means that heating with superheated steam is similar to heating with ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Electric Steam Superheaters are available for use with steam boilers as auxiliary pieces of equipment. Our superheaters are all custom-made and built to meet the specific design requirements of each application. A superheater increases the temperature of the steam but does not increase the latent heat of evaporation. ...
-
PremiumManufactured by Matthews Environmental Solutionsbased in USA
Heat is recovered indirectly from the incinerator exhausting gas by passing them either through a gas tube heat exchanger or across a radiant tube boiler. Energy is exchanged between the gases and water to produce steam for heating or industrial processing. When used for electrical power production, the steam is further heated within a super-heater to produce a dry steam to drive a ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Titan™ 130 gas turbine two-shaft for compressor and mechanical drive applications is designed to deliver a simple-cycle thermal efficiency of 36 ...
-
PremiumManufactured by Inciner8 Limitedbased in UNITED KINGDOM
ORC technology is based on the widely known and proven Rankine Cycle principle. It was named after William John Macquorn Rankine, a Scottish polymath and Glasgow University professor. The Rankine cycle is a cycle that converts heat into energy. The heat is supplied externally to a closed ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
For the past 45 years, ACME-AEP has manufactured the key components of auxiliary boiler systems, namely boilers, superheaters, secondary pressure vessels, and associated control systems. Power generation projects require an auxiliary boiler system to provide steam on start-up, during maintenance shut-downs, steam turbine gland systems, ...
-
PremiumManufactured by VPInstrumentsbased in NETHERLANDS
The Current Transformers for with your 3 Phase Power Meter to measure power consumption! Select one per phase to be ...
-
PremiumManufactured by Acme Engineering Prod. Ltd.based in CANADA
ACME Steam Superheaters are available for operating pressures of up to 800 PSIG and temperatures up to 1200 deg. F. Steam flow is only limited by practical size considerations. Pressure sections are built to ASME code with National Board or CRN registration. Burners are AGA or CGA listed with UL, CSA or other gas train standards as requested or applicable. The ACME Steam Superheater is delivered ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
The Titan 130 gas turbine two-shaft for compressor and mechanical drive applications is designed to deliver a simple-cycle thermal efficiency of 36 ...
-
Manufactured by Henan Gomine Machinerybased in CHINA
Ball mill is the key equipment for secondary grinding after crushing. And it is suitable for grinding all kinds of ores and other materials, no matter wet grinding or dry grinding. Besides, it is mainly applied in many industries, such as ferrous&non-ferrous metal mine, building materials, chemical, electric power, coal, traffic, light industry, etc.According to different discharging ways, it ...
-
Manufactured by Deepankuram synergiesbased in INDIA
Deepankuram Synergies: Power Synergies. Deepankuram Services has now associated with power Synergies apart from TDPS and KEL in providing solutions for Steam Turbine Sector. Deepankuram has associated with PS in providing solutions for Power Sector. PS is market leader in India in 10 MW turbine segment. Deepankuram has associated with PS for New and Refurbished Turbines. below is intro of PS ...
-
Manufactured by Cyclone Power Technologies, Inc.based in USA
Cyclone’s Waste Heat Engine (WHE, pronounced “we”) recaptures heat from external sources to create steam which powers the engine. The WHE models are designed to run a grid-tied or primary electric power generator while producing ZERO Emissions. All WHE operations are currently run through Cyclone’s subsidiary Cyclone-WHE LLC, which operates under the trade name “WHE ...
-
Manufactured by Chola Turbo Machinery International Pvt Ltd (CTMI)based in INDIA
Backpressure turbines can either be single-stage or multi-stage which are often used in industrial plants, the turbine mainly serves as a reducing station between the boiler and the process steam header. These turbines can either be used for drive applications (Sugar mill drives, Sugar fibrizor / Shredder drives, Pump drives, and so on) or power generation applications in which case the turbine ...
-
based in INDIA
Triveni offers SMART (Sustainable Modularly Arranged pressure Reducing Turbines) units which are essentially backpressure steam turbines and perform the same function as pressure-reducing stations while offering additional electricity by converting steam energy into electrical ...
-
Distributed by Tuba Turbine GmbHbased in GERMANY
A heat recovery steam generator or HRSG is an energy recovery heat exchanger that recovers heat from a hot gas stream. It produces steam that can be used in a process (cogeneration) or used to drive a steam turbine (combined cycle). Modular HRSGs can be categorized by a number of ways such as direction of exhaust gases flow or number of pressure ...
-
Manufactured by Iran Nasb Niroo (INNCO)based in IRAN
INNCO SY turbine according to API611 standard is available in different models with a maximum power of 2682 hp (2000 ...
-
Manufactured by Iran Nasb Niroo (INNCO)based in IRAN
INNCO TY turbine meet or exceed API611 standard is available with maximum power of 3490 hp (2600 ...
-
based in USA
Nooter/Eriksen designs and supplies Enhanced Oil Recovery Steam Generator (EORs) which are used in oil fields to increase the amount of oil that can be extracted. Saturated steam is injected into the oil field to reduce the viscosity of the oil and improve the percentage recovery. Nooter/Eriksen supplies EORs that are installed at the exhaust of a combustion turbine; thereby recovering exhaust ...
-
Manufactured by ICM, Inc.based in USA
With ICM’s steam turbine, your plant can harness the energy created by the let-down process and turn it into usable electrical power to help meet your plant’s energy requirements. The turbine takes advantage of steam that is already being produced by the plant’s boilers by replacing the pressure-reducing valve in the line to the evaporators. The addition of ICM’s steam ...
-
Manufactured by Iran Nasb Niroo (INNCO)based in IRAN
The smallest turbine of INNCO according to API611 standard with high reliability is available in 3 different models to adapt to the existing steam conditions and the desired application with a maximum power of 240 hp (180 ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you