Steam Turbines Equipment For Energy Management
-
Manufactured by Wabash Power Equipment Companybased in USA
Wabash provides a selection of steam turbine generator sets (both condensing and non-condensing) ranging from 5,000 KW to 50,000 KW ...
-
based in NORWAY
Open-cycle gas turbines and reciprocating engines are fast-starting, flexible power generators, but they emit large quantities of high-grade heat which is currently ...
-
Manufactured by Clean Energy Systems, Inc. (CES)based in USA
The Clean Energy Systems reheat combustor, or reheater, dramatically improves the efficiency of combined steam and gas turbine power cycles by boosting the drive gas to turbine inlet temperatures typically associated with gas turbines and even beyond. The principles behind the reheater are essentially the same as applied in the CES drive gas generator but exchanging water with steam as ...
-
Manufactured by Accelera, Brand of Cummins Inc.based in USA
Optimize your power generation without grid failures or pollution through innovative, efficient and flexible SOFC ...
-
Manufactured by LAWI Engineering GmbHbased in GERMANY
LAWI Engineering’s innovative steam power plant concept – the LAWI EtaPlant-C- is an outstanding breakthrough in the economical and ecological use of solid biomass and other solid waste fuels such as MSW. In combination with high-grade plant components, the LAWI EtaPlant -C achieves an unsurpassed net-efficiency up to 30 % electrically. Process steam extraction with a heat and ...
-
Manufactured by Energy Bruciatori lndustriali S.r.l.based in ITALY
The IBSM MG series industrial burner is a MONO-BLOCK type burner powered both with NATURAL GAS, METHANE or LPG (liquid propane gas) and with DIESEL 2°E at 20°C,thanks to dual fuel technology. This feature increases its already high flexibility, allowing you to choose the type of fuel and thus obtain a considerable economic ...
-
based in UNITED KINGDOM
Wood Group GTS provides a comprehensive service for repair of steam turbines used in power generation and process industry applications. With over 400,000 components in service worldwide, we have proven expertise in the refurbishment of turbine blades, nozzles and diaphragms degraded by corrosion, erosion and foreign object damage. High quality repairs are performed within dedicated and fully ...
-
Manufactured by Turtle Turbines (P) Ltd.based in INDIA
High Efficiency: Optimised Multistage Turbine designed for highest in its class efficiency delivering maximum power at given Steam Parameters. Continuous Duty Turbine: Continuous duty Steam Turbine designed to operate 24×7. Available to operate all year long. Petroleum Industry Standard: Designed on the basis of American Petroleum Industry Standard for excellent reliability and long life. ...
-
Manufactured by Geothermal Development Associates (GDA)based in USA
A condensing plant makes better use of the resource than a non-condensing plant. In this model, steam is expanded through the turbine down to a very low pressure. Hence, much more power can be generated from the same steam flow when compared with non-condensing plants. After leaving the turbine the steam encounters cooling water sprays in a direct contact condenser. The heat gained by the cooling ...
-
Manufactured by Mitsubishi Hitachi Power Systems, Ltd. (MHPS)based in USA
For more than 100 years, Mitsubishi Hitachi Power Systems has been engaged in the design, manufacture and installation of a wide range of steam turbines – from small single-cylinder turbines to 1,700MW-class large nuclear turbines – for applications across the spectrum of industrial and utility power ...
-
Manufactured by Eralp Makina Kazan Kimya Ltd. Sti.based in TURKEY
Waste Heat Boilers designed and manufactured for heat recycling are used in many areas according to flow and process. Waste heat boilers made of alloy, high alloy and stainless steel according to the physical properties, content, flow and process conditions of the gas are designed and produced as water pipes or flame-smoke pipes. These heat recovery steam generators (HRSGs), which are used to ...
-
Manufactured by Integrated Turbomachinery Incbased in USA
80% of steam turbine failures are lube oil related. Your solution is Easy-Lube™. Simply provide your equipment with a constant flow of clean and cool lubrication and extend your service ...
-
based in USA
MSI’s Turbonetics Energy Independence (TEI) turbine uses advanced rotor design to achieve the following breakthrough characteristics: Unsurpassed efficiency, typically 75% as opposed to 55% typical of conventional technologies. Superior efficiency is maintained over a broad operating range. Very small footprint, such that the entire skid takes up less floor space than is typically occupied ...
-
Manufactured by Econotherm Limitedbased in UNITED KINGDOM
Econotherm exhaust gas waste recovery units are widely used to deliver significant running cost and corresponding C02 reductions on many types of furnaces, ovens, boilers and process ...
-
Manufactured by Chongqing Zanyo Electromechanical and Machinery CO., Ltdbased in CHINA
ZYT Vacuum Turbine Oil Filtration Machine is a special equipment for filtering turbine oil (steam turbine oil), lubricating oil and cooling oil, it has the functions of removing large amount of water and precision removing of impurities from ...
-
Manufactured by Ross Boilersbased in INDIA
The RM series combines the benefits of a watertube furnace along with a multipass firetube steaming chamber. This results into higher heat transfer area , hence increasing efficiency as compared to conventional solid fuel fired steam boilers. High efficiency is achieved by properly utilizing the fuels radiant heat in the water cooled furnace and the shell type steaming ...
-
Manufactured by M+M Turbinen-Technik Gmbhbased in GERMANY
Optimizing the use of your process steam with combined heat and power production. With our robust and versatile M+M backpressure turbines, your process steam can be utilised more efficiently and sustainably. Instead of simply reducing the steam pressure at a pressure-reducing station, you can expand your process steam in the turbine and generate electricity. This combined heat and power (CHP) ...
-
Manufactured by HoStbased in NETHERLANDS
HoSt acts as a turnkey supplier of (air blown) fluidized bed gasifier plants. By means of gasification biomass fuels can be converted to a combustible syngas, which can be cleaned and used in several kinds of power generation equipment. Gasification is a feasible technology for thermal conversion of waste, meeting the strict emission ...
-
Manufactured by BERAN, A CMTG Companybased in UNITED KINGDOM
Protection and condition monitoring systems are essential to monitor critical assets and understand machinery health for long-term safe, efficient operation by plant owners and operators to prevent machine failure, and planning maintenance tasks and activities! Automated vibration trip system providing AP1670-compliant machinery protection with integrated condition monitoring functionality. ...
-
Manufactured by BERAN, A CMTG Companybased in UNITED KINGDOM
The PlantProtech PROTOR Mobile™ is a high-speed data acquisition and powerful diagnostic system for critical rotating ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you