Stirling Technology Articles

  • University of Stirling - Case Study

    The Institute of Aquaculture at University of Stirling conducts fatty acid Omega 3 analysis of aquaculture and clinical samples with the help of Peak’s generators.  Name: James Dick Job Title: Technical Manager Company: University of ...

  • No Place Is Too Far

    The remote location of hydropower stations is often a great challenge when major repair work is necessary. The refurbishment of a large generator in the Scottish Highlands shows how Sulzer finds cost-effective service solutions even in places miles from nowhere. Much of the UK hydroelectric capacity was built during the 1950s. These installations have performed extremely well, especially ...


    By Sulzer Ltd.

  • DOE announces $55 million to fund GENSETS And TERRA programs

    On June 18, 2015, the U.S. Department of Energy (DOE) announced $55 million in funding for projects to accelerate biomass development and develop generator technologies under the Advanced Research Projects Agency-Energy (ARPA-E). The funding will be divided between two of ARPA-E's ...


    By Bergeson & Campbell, P.C.

  • CSP technology advances crucial for cutting costs in South Africa

    With some of the highest levels of Direct Normal Irradiance (DNI) in the world, CSP is positioned to play an immense role in South Africa’s energy landscape. Currently, four CSP technologies are being promoted internationally, parabolic trough, power tower, fresnel and dish stirling, but with the lack of operational data in South Africa the industry is still evaluating the suitability of ...


    By New Energy Update

  • An engineer–oriented optimisation of Stirling engine cycle with finite–size finite–speed of revolution thermodynamics

    Finite–time thermodynamics takes into account exo–irreversibilities which are not managed by reversible thermodynamics, especially reservoir–to–gas temperature gaps. In today's works, thermodynamicists use the working gas mass as the main imposed parameter. In this paper, the study of the Stirling engine cycle is carried out with a motorist–oriented viewpoint: instead of the working gas mass, the ...


    By Inderscience Publishers

  • Solar-powered Stirling engines: a low-cost possibility for village power, pumping and cooling

    Stirling engines are heat engines that operate on a closed thermodynamic regenerative cycle and are used as power systems, refrigerators or heat pumps. Recent developments in Stirling technology allow the use of low temperature heat sources including flat plate solar collectors. New concepts for low-cost, low ΔT Stirling engines that may be made by village craftsmen using locally available ...


    By Inderscience Publishers

  • Challenges of Fuel Gas Purification for Cogeneration Under Stringent Regulatory Requirements

    ABSRTRACTInland Empire Utilities Agency (IEUA), a municipal water district based in Chino, CA is currently executing a cogeneration power project, titled Renewable Energy Efficiency Project (REEP) at the Regional Plant No.5 (RP-5), which showcases a variety of innovative technologies for the power production. The project involved many innovative technologies, most of which are still in the ...

  • Exergetical analysis and design optimisation of the Stirling engine

    A detailed design optimisation study of an endo- and exoirreversible Stirling engine is carried out. After energetic, entropic and exergetic analyses of the hot-end and cold-end heat exchangers of the engine, an adapted model of the engine, including the heat exchangers and the regenerator, is proposed to optimise the distribution of the limited heat exchangers' total area. Power generation, ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you