Stirling Technology Equipment For Energy Management
-
based in SWEDEN
The Stirling engine, which is what is referred to as a gas pressure engine, was invented in the early 19th century. From an historical perspective, its practical applications has been limited, compared to the internal combustion engine, with the result that the technology has never had a major commercial breakthrough. Combined with an overall societal push to reduce the use of fossil fuels, the ...
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
PCI is developing novel catalytic burners for Stirling engines. External combustion engines, like the Stirling engine, have benefits over their internal combustion counterparts due to their ability to remain completely sealed from the elements and their nearly silent operation. Stirling engines are inherently robust, quiet, and only require an external heat source for operation. These ...
-
based in USA
Since 1960, B&W has supplied more than 240 Stirling® power boilers - a top-supported, two-drum, single-pass gas flow steam generator - units with ratings exceeding 75 million pounds of steam per hour, and which burn a variety of ...
-
Manufactured by Frauscher Motors GmbHbased in AUSTRIA
Stirling module Gen70 for external heat supply, equipped with starter and rectifier control for connecting 24V batteries, max. charging capacity 43 A, with cooler and cooling water pump, displays for starter and charging current, process pressure, cooling water and heater ...
-
Manufactured by Qnergybased in USA
Qnergy's PowerGen is a thermal-powered generator suitable to meet remote power needs utilizing virtually any combustible gaseous fuel. All Qnergy PowerGen generators feature our patented QB80 Series Stirling Engines.The PowerGen generator provides reliable, affordable electricity to areas around the globe with little or no existing power distribution ...
-
based in CANADA
Bioenergy is a renewable energy resource derived from living organisms and/or their byproducts. It currently accounts for approximately 6% of Canada’s total energy supply. Bioenergy is an extensive sustainable energy resource that can supply energy to Canada while emitting low CO2 and reducing waste. Scientists and engineers at CanmetENERGY are at the forefront of innovative technology ...
-
Manufactured by ABEI Energybased in SPAIN
Montealto Energy has successfully developed projects for 100 MW and is currently developing 200 MW. The company took part in the non-technological development of 200-MW projects. A solar thermal system is an indirect conversion technology that requires an intermediate step for the transformation of solar energy into electricity. Solar thermal stations collect the heat from the sun and transfer ...
-
Manufactured by Qnergybased in USA
Designed for rugged and remote operation, the PowerGen remote power generator provides reliable electrical power supply to the most demanding and mission-critical loads. Based on Qnergy’s no-maintenance and highly reliable PCK series Stirling engines, the generator package can work seamlessly with a variety of fuel supplies, including: natural gas, propane, ethane, biogas, and multiple ...
-
Manufactured by ÖkoFEN Forschungs- und Entwicklungs Ges.m.b.H.based in AUSTRIA
The Pellematic Condens condensing boiler sets new standards. With its pioneering Condens technology, the boiler makes it possible to use condensing technology in any heat distribution system: The innovative pellet boiler can also be installed flexibly in the event of higher return temperatures, which is often the case in modernisation ...
-
Manufactured by Stirling Cryogenics B.V.based in NETHERLANDS
Stirling Cryogenics has designed an integrated gas purification & liquefaction plant together with sister company Hysytech Srl from Turin, Italy for micro scale LNG production. The plants are of a modular design and can be supplied in the range of 1 – 30 ton/day with each Stirling module producing approximately 1 ton/day. There are several different designs for different feed gas ...
-
Manufactured by Stirling Cryogenics B.V.based in NETHERLANDS
Under the brandname StirLIN, Stirling Cryogenics offers a range of liquid nitrogen producing plants with different capacities but all based on the same principle and with the same features. These StirLIN plants produce LN2 on-site from ambient air by only using electrical power as input and range from 3 up to 50 liter per hour (70 – 3,600 liter per ...
-
Manufactured by Solar MEMS Technologies S.L.based in SPAIN
ISS-AX sun sensor measures the incident angle of a sun ray in both orthogonal axes. The high sensitivity reached is based on the geometrical dimensions of the design. Its characteristics make it a suitable tool for high accurate sun-tracking and positioning systems, with low power consumption and high reliability. ISS-AX sun sensor has been designed with a unique and novel own technology based on ...
-
Manufactured by Solartron Energy Systems Incbased in CANADA
The 7 meter hybrid parabolic solar concentrator (solar dish) continuously tracks the sun throughout the day using a dual axis tracker enabling the system to harvest maximum solar energy from early sunrise to late sunset. Most solar concentrator tracking technologies use an actuator for vertical tracking. The 7 meter solar concentrator uses a slew drive instead of an actuator for rock-solid ...
-
Manufactured by ERT Refrigeration Technology GmbHbased in GERMANY
The StirLNG-1 is a single-cylinder cryogenerator based on the Stirling principle with a cooling capacity from 1.5 kW and a condensing capacity from 0.1 million litres of LNG per year. It can be used as a stand-alone system with its own control unit or in multisystem systems for ...
-
Manufactured by Qnergybased in USA
The Glycol HQat TracQ (GHT) feature allows for th9 waste heat from the Stirling engine and it's exhaust to be used by the customer. A plate heat exchanger is used to separate the engine coolant and the GHT media. The GHT media is circulated using a rotary vane pump on a variable speed motor. The PowerGen monitors the supply and return temperatures of the GHT media and adjusts the units operation ...
-
Manufactured by Qnergybased in USA
Qnergy's PowerGen is a thermal-powered generator suitable to meet remote power needs utilizing virtually any combustible gaseous fuel.All Qnergy PowerGen generators feature our patented QB80 Series Stirling Engines.The PowerGen generator provides reliable, affordable electricity to areas around the globe with little or no existing power distribution ...
-
Manufactured by IRCameras LLCbased in USA
600 mW / 5 mm slip-on. The UP series offers a comprehensive and versatile range of Linear Stirling coolers especially designed for cooling detectors in thermal imagers and IR sensors. ...
-
Manufactured by Ocean Power Technologies, Incbased in USA
Ocean Power Technologies’ hybrid PowerBuoy® is an easily deployable, economical source of reliable offshore power and communications suitable for almost any ocean environment. Applications include surface surveillance, subsea monitoring, subsea power and charging, offshore connectivity and emergency service power for offshore industries including oil and gas, science and research, and ...
-
based in CANADA
Concentrating Solar Power (CSP) is a technology that involves using a large-scale array of parabolic reflectors or mirrors to collect solar thermal energy. This heat energy is used to generate steam to produce electrical power with traditional turbines as are used in fossil fuel and nuclear plants ...
-
Manufactured by Microgen Engine Corporation Groupbased in NETHERLANDS
A Stirling engine needs heat to function. This heat drives the thermodynamic process which generates the power and if harvested the heat. To bring the heat in the engine, HEAT ACCEPTORS are required. For different circumstances different heat acceptors need to be used, such as clean combustion of a stable calorific gas on one side of the spectrum or the combustion of a specific biomass with ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you