Syngas Equipment For Energy Management
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
AERZEN screw compressor packages are characterised by a great variety of types and a lot of modification possibilities. Whether these compressors serve as part of the customer's plant concept or they are applied as complete system solution, AERZEN always adapts to individual customer requirements. Forming the basis for this is the development competence of this world market leader, as AERZEN has ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Special Solutions for Preadmission Applications. The direct-drive GM ... dz blowers from AERZEN are high-performance machines. 1 or 2 stage design, with separate pressurised oil lubrication for the oil-free transport and compression of air, neutral gases, and gas mixtures. Highly advanced and extremely robust Roots-type products. Available in a wide range of special materials and seals, such as ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
In general the design for those flares is the same as for our standard flares. In accordance with the project-specific requirements (for example special gas composition, high gas temperatures or pollution) specific technical solutions and equipment are added. In principle all pyrolysis gas flares are individually customized, designed and calculated. All syngas flares have an own supporting burner ...
-
PremiumManufactured by Aerzener Maschinenfabrik GmbHbased in GERMANY
Belt-driven 3-lobe compact package. Blower stage and assembly with special materials and numerous modification options. ATEX certified. Extensive accessories such as overflow regulators and shut-off devices. ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
Our Syngas Analyzers and Gasification Analyzers high-stability infrared detector for the simultaneous measurement of CO, CO2, and CH4. These gases are suitable for challenging applications such as syngas and gasification atmospheres. In addition, analyzers may use a compensated thermal conductivity cell for H2. Electrochemical O2 sensors may also measure percent levels of oxygen in the sample ...
-
PremiumManufactured by Enviro Solutions Technology Co.,Ltdbased in CHINA
SS-500D online syngas analysis systems for continuous monitoring of biomass and coal gasification processes adopts the imported gas sensor measurement using electrochemical sensor of oxygen, hydrogen measurement using TCD thermal conductivity sensor, methane and carbon dioxide, carbon monoxide, measured using non dispersive infrared gas sensor NDIR principle (selected according to user needs). ...
-
Manufactured by Frontline BioEnergy, LLCbased in USA
TarFreeGas Advanced Gasification, similarly to PMFreeGas® gasification, TarFreeGas® utilizes a pressurized reactor containing a fluid bed of sand and can operate with either air and steam or pure oxygen and steam. TarFreeGas® causes tar levels up to 99% lower than traditional fluidized bed gasifiers. Frontline’s gasification systems convert waste into valuable synthesis gas ...
-
Manufactured by Process Systemsbased in FRANCE
We manufacture syngas thermal oxidisers and steam generators. In more than 40 years of projects using heat transfer applications, PROCESS SYSTEMS has acquired a wealth of expertise in process, thermal and mechanical design, enabling us to perform all stages of manufacturing, installation and start-up of steam generation and recovery units. Through its vast experience, PROCESS SYSTEMS is able to ...
-
Manufactured by BioCNG, LLCbased in USA
Syngas is a gas mixture made up of carbon monoxide, carbon dioxide and hydrogen. It is produced due to the gasification of a carbon containing fuel to a gaseous product that has some heating value. Examples of syngas include gasification of coal, waste to energy gasification, and steam reforming of natural gas to generate hydrogen. Syngas can be used to produce diesel, or converted into methane, ...
-
Manufactured by Caloric Anlagenbau GmbHbased in GERMANY
With the HC process, high purity hydrogen is produced by steam reforming of a hydrocarbon combined with a PSA purification step. The feed is mixed with a split stream of hydrogen and then preheated in the heat exchanger prior to passing a sulphur removal. The feed is then mixed with superheated steam. Whilst passing the catalyst in the reformer tubes, the mixture of water vapour and feed is ...
-
Manufactured by Topsoe A/Sbased in DENMARK
AR-401 is a nickel catalyst on activated magnesium alumina spinel support. AR-401 is available in the following ...
-
Manufactured by Zorg Biogas GmbHbased in GERMANY
Biogas blowers of this series are used at large biogas plants with biogas flow range 2000 m³/h. Due the wheel made of light aluminum, low power motors are installed on the blowers, which makes the blower economical. Compared to other blowers these biogas blowers have increased reliability and practically do not break. The blowers are perfectly balanced and are rather silent. All-weather ...
-
Manufactured by Precision Combustion, Inc. (PCI)based in USA
NOx emissions are a primary contributor to air pollution, and their control is a primary focus of air pollution regulations. PCI is developing a gas turbine engine catalytic combustor that enables low single digit ppm NOx emissions along with high combustion stability, a wide turndown range, and substantial fuel flexibility. PCI's RCL® catalytic combustor technology is a breakthrough, ...
-
Manufactured by Membrane Technology and Research, Inc. (MTR)based in USA
Refinery hydrogen requirements are growing due to the increased use of hydrocracking and hydro-treating, including processes such as HydroFlex™ and VeganR that produces renewable diesel. Residual gas from these processes contains a significant amount of unused hydrogen at pressure, and membranes provide an economical recovery method. MTR’s hydrogen-permeable VaporSep-H2™ ...
-
Manufactured by H2 4U Pty Ltd.based in AUSTRALIA
Green H2 4U Pty Ltd’s intellectual property enables us to build specialist High Temperature Waste Gasification plants that convert over 90% of waste materials into Green Hydrogen, energy and valuable ...
-
Manufactured by Xylowatt S.A., A Part of Xylergybased in BELGIUM
NOTAR reactor is the sole industrial gasifier producing a Clean Syngas (NO – TAR!) at the outlet of the reactor. Technology lies on the physical separation of the reaction zones. Design allows accurate control of critical reaction parameters. Gasifiers assembles 3 reaction zones into a compact ...
-
by Uniwastec Agbased in SWITZERLAND
UNIWASTEC generates electricity in a combined cycle power plant. UNIWASTEC generates electricity in a combined cycle power plant. Synthetic natural gas is combusted in a gas turbine that drives a generator, producing electricity that can be fed into the grid. The hot exhaust gases are converted into steam via a heat exchanger and fed into a steam turbine. This also drives a generator to produce ...
-
Manufactured by Nexterra Systems Corp.based in CANADA
Nexterra's next-generation power generation systems can provide clean, reliable syngas suitable for firing in high-efficiency internal combustion engines designed for stationary power/CHP applications. This high-efficiency power/CHP solution is ideal for District Energy Plants and Independent Power Producers where power prices are particularly high and where efficiency is a critical ...
-
Manufactured by Frontline Wastebased in USA
JF Pyrolysis System converts waste into ...
-
Manufactured by Pyrotech Energybased in AUSTRALIA
Mobile PyroFlash plants are standard equipped with a dosing silo on top of the installation. The biochar is removed from the reactor with a screw conveyor, the liquid products are pumped. The syngas can be sent to flare for thermal use or used as a gaseous bio-fuel connected to a gas generator for electricity ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you