Only show results in Michigan? Ok

Tube Heat Exchangers equipment for Energy Management

  • Premium

    WesTech - Sludge Heating Systems

    WesTech offers sludge heating solutions for nearly any anaerobic digestion application. From mesophilic to thermophilic, WesTech's versatility and experience ensure that our sludge heating equipment will provide years of dependable service. We can provide heat exchangers to be piped into existing hot water systems or a complete boiler/ heat ...

    By WesTech Engineering, Inc. based in Salt Lake City, UTAH (USA). from Anaerobic Digestion Product line

  • Premium

    Carbolite - Model PDS 120 MO/14 - Sintering Furnace

    The PDS type furnaces are available with a usable volume of 25, 120 and 250 l. With the special design of the PDS type furnaces, it is possible to do both, debinding and sintering in one furnace. For debinding, a special gas guiding configuration and molybdenum retort are utilized to protect the heating elements from all gaseous by-products. The ...

  • Premium

    Heat Exchange Systems

    To maintain the temperature within an anaerobic digester to within the mesophilic range of 35 – 38 Deg C, a sludge heating exchange system is used. A portion of the sludge is re-circulated continuously through a tube in tube type sludge heat exchanger using a sludge recirculation pumps.

    By Hydroflux Pty Ltd based in Sydney, AUSTRALIA. from Digesters Product line

  • Premium

    ASTIM - Model HEX - Pipe In Pipe Tube-Tube Heat Exchanger (TTHE)

    Tube–tube heat exchanger (TTHE) is a low cost, vented double wall heat exchanger which increases reliability by avoiding mixing of fluids exchanging heat. They are manufactured as a fully-welded design, with removable end caps and insulated if requested.

    By ASTIM A.S. based in Gebze - Kocaeli, TURKEY. from Sludge Product line

  • Premium

    Anguil - Industrial Energy & Heat Recovery Solutions

    Every energy demand is unique, as is every energy-efficiency improvement opportunity. At Anguil, our track record includes an ability to blend time-tested, standard products with innovative, custom engineered solutions. We design, manufacture, and install energy recovery systems that decrease your energy consumption, reduce operating costs and ...

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA). from Other Product line

  • Premium

    Inciner8 - Heat Recovery System

    Get something back from your waste with our innovative range of heat exchange modules. Inciner8 have found the optimal way to convert energy from waste and make it usable whether you need it for washing, disinfection, heating, or for your technological process.

    By Inciner8 Limited based in Southport, UNITED KINGDOM. from Incinerators by Application Product line

  • Heat Exchangers and Thermo-Technical Device

    The transmission of thermal energy from one medium to another is for instance used for heat recovery of exhaust air or exhaust gases or for cooling of engines, in air condition systems or other industrial facilities. In this process the transmission from medium to medium is done directly, indirectly or half-indirectly. Our product range covers all ...

    By ACI Industriearmaturen GmbH based in Eschweiler, GERMANY. from Others Product line

  • Conco - Model C3S - Tube Cleaner

    The Conco C3S tube cleaner featuring TruFit™ technology is a heavy-duty tube cleaner for condenser and heat exchanger tubes in sizes 7/8” and 1”.  Effective on all types of deposits, the C3S tube cleaner features a reinforced three-stage design making it especially effective for the removal of hard deposits, corrosion and ...

    By Conco Services Corporation based in Verona, PENNSYLVANIA (USA). from Tube Cleaners Product line

  • Kaysuns - Seamless Stainless Steel Pipe

    Cold Rolling is a preferred production process for high precision seamless tube. Most of our heat exchanger tubing and mechanical tube are made by cold rolling. This technique provides a high forming rate, narrow tolerances and good turnouts. Now the biggest diameter we can get is 168.3mm for this process.

    By Kaysuns based in Wenzhou, CHINA. from Pipe Product line

  • Straight Tube Brass Heat Exchanger

    Brass nned exchangers are very dicult to clean due to the binding agent collecting in small ns, trapping in the foulant. Conventional high pressure water blasting increases the risk of tube and n damage. We were required to remove the hydrocarbon fouling from the shell side while not damaging the expensive brass nned tubes

    By Absolute Throughput Solutions Inc. based in Edmonton, ALBERTA (CANADA).

  • B-max - Biomass Hot Air Generator

    The B-max Technology hot air generator provides the highest quality heat exchanger and allows the customer an immediate saving in running costs. The combustion chamber, unique in its kind, is designed with stainless steel double tube bundle in order to obtain the maximum heat exchange between the internal and the external air, while ensuring ...

    By B-max Technology based in Asigliano Veneto VI, ITALY.

  • Calandria Evaporator

    The Swenson Calandria Evaporator is applied less often today than it was years ago, though there are still a number of companies that prefer this evaporator for various applications. For most applications, however, the lower equipment costs for other designs has prompted the replacement of calandria evaporators with LTV rising-film, LTV ...

    By Swenson Technology, Inc. based in Monee, ILLINOIS (USA). from Evaporators Product line

  • Shell & Tube Heat Exchanger

    Tubular or shell and tube heat exchanger consist of graphite pipes and tube sheets, in which the pipes are fastened. For the guidance of the medium on the shell side and the stabilization of the apparatus baffles are assigned. Shell and Tube Heat Exchanger are characterised by a very small pressure loss and are suitable in particular for ...

    By Wilk-Graphite GmbH based in Lörrach, GERMANY.

  • APL - Shell and Tube Heat Exchangers

    The design and production follow the classic TEMA-standard, where each type of equipment can be produced according to the individual customer's wishes.

    By APL Apparatebau GmbH based in Hopfgarten, AUSTRIA.

  • Wort Kettle

    Wort kettle is regarded as the turning point in the brewing of Beer. Any Change in every boiling practice is to be monitored carefully and thoroughly to ensure they do not affect the quality and flavour of the final beer. Generally boiling wort at, or near, normal atmospheric pressure gives the most acceptable results.

    By Praj Industries Ltd based in Pune, INDIA. from Brewery Plants Product line

  • HRS - Model DTA Series - Food-Grade Double Tube Heat Exchanger

    The DTA type heat exchanger is a double tube heat exchanger (tube within a tube), similar to the DTI type heat exchanger, but with a design that is suited for food industry applications. The inner tube is corrugated for increased heat transfer. The product flows through the inner tube and the service fluid through the annulus between the inner and ...

    By HRS Heat Exchangers based in Lorquí - Murcia, SPAIN. from Corrugated Tube Heat Exchangers Product line

  • Dustex - Heat Exchangers

    Dustex designs & manufactures air to air heat exchangers for gas cooling & heat recovery purposes for industry & utility applications.Heat exchangers are custom designed & suited to handle abrasive particulate laden gas.

    By Dustex Corporation based in Kennesaw, GEORGIA (US) (USA).

  • Biogas Reheater

    Reheat biogas: Digester produced biogas is 100% water saturated. The naturally cooling biogas, moving from the digester to the engine, will release large amounts of water into the gas pipework system, which has the potential to block pipework and damage mechanical plant.

    By Biogas Products Ltd based in Brierley Hill, UNITED KINGDOM. from Biogas Conditioning Product line

  • Biogas Dehumidifier

    A standard biogas dehumidifier consists of 2 tube heat exchangers. Including a biogas to biogas heat exchanger for biogas reheating, and, a cold water to biogas heat exchanger for biogas cooling. Cold water is provided by an industrial grade chiller and a demister pod is located between the 2 heat exchangers to remove any airborne water droplets. ...

    By Biogas Products Ltd based in Brierley Hill, UNITED KINGDOM. from Biogas Conditioning Product line

  • Gefico - Heat Exchangers

    Gefico is a leading company in the area of shell & tube heat exchangers. We provide engineering, manufacturing and after sales services. Our heat exchangers are maintenance-friendly and robust. Proven corrosion-resistant materials (DIN CuNi10Fe1.6Mn) are selected by means of technical, but also economic criteria.

    By Gefico, S.L. based in Cerceda, SPAIN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you