Only show results available in Virginia? Ok

Turbine Design equipment for Energy Management

  • ProQuip SaniQuip - Model SA Series - Stainless Steel Agitator

    High performance stainless steel air motor drive with integral tri-clamp mounting for minimal footprint.

    By ProQuip, Inc. based in Macedonia, OHIO (USA). from Stainless Steel Agitator Product line

  • Model PMG 550-5850 KW, 1000-1500 RPM - High Speed Permanent Magnet Generators

    The Switch high-speed PMGs operate with a three-stage gearbox and feature a speed range between 1000 rpm and 2000 rpm. They offer an extremely small generator size and very high efficiency. As a stand-alone component, these PMGs can be used with many different turbine designs. Existing double-fed induction generators can be easily replaced with ...

    By The Switch - a Yaskawa company based in Helsinki, FINLAND. from High Speed Permanent Magnet Generators Product line

  • Global Hydro - Model smarT - Small Compact Turbines

    smarT is a new economic design for small turbines in the range of 100kW to 500kW. Goal of the development was the reduction of the installation time on site. Attributable to the compact assembly of all necessary parts, the expense for installation is nearly reduced to zero. Another focus during the development was a robust, maintenance-friendly ...

    By Global Hydro Energy GmbH based in Niederranna, AUSTRIA.

  • airWAVE

    The airWAVE turbine is a design evolution, improving upon the original Denniss-Auld turbine. The airWAVE turbine has fewer moving parts and a conversion efficiency that is higher than both the Denniss-Auld and other comparable turbines. Like the Denniss-Auld, the airWAVE turbine is located well above the ocean, with no moving parts in the water. ...

    By Oceanlinx Limited based in Macquarie Park,, AUSTRALIA.

  • Turbine Runner - Propeller

    A new turbine runner was designed together with the Institute of Fluid Mechanics and Hydraulic Machinery (IHS), Universität Stuttgart, especially for this application. This propeller blades are produced individually for each project. The propeller blades and the propeller hub are made out of stainless steel, both are welded together. For ...

    By DIVE Turbinen GmbH & Co. KG based in Amorbach, GERMANY.

  • AxSTREAM Hydro - Axial Hydraulic Turbine Design, Analysis and Optmization Software

    AxSTREAM Hydro software helps with creation of new designs, analysis of existing design and retrofitting of axial hydraulic turbines.

    By SoftInWay Inc. based in Burlington, MASSACHUSETTS (USA). from Axial Hydraulic Turbine Design, Analysis and Optmization Software Product line

  • JLAKit - Hydraulic Crossflow Turbine

    JLAKit is a hydraulic crossflow turbine. What makes it special? Its design, which is based on a kit of easy-assembly components. This robust and reliable turbine has been designed for delivery as a kit of components, which can be assembled locally by the purchaser.  This allows to propose this machine at a highly competitive price. It ...

    By JLA & Co Sprl based in Marchin (Belgique), BELGIUM.

  • Delta - Hydraulic Turbines

    DELTA manufactures a complete line of hydraulic turbines for power generation with outputs ranging from 5 kW to 10 MW, applicable to falls from 2 to 500 meters. DELTA turbines collect our long experience in design and construction of turbo machinery of the highest efficiency, quality and reliability. The turbine design is optimized with ...

    By Delta Delfini & Cia SA based in Guayaquil, ECUADOR.

  • Hi-Force - Model HVL - Single Acting Low Height Pancake Cylinders

    The HVL pancake cylinder range combines a very low closed height with a 6mm stroke, providing a precise adjusting and lifting force in very confined work areas. Ideally suited for applications requiring alignment of machinery, turbines, heavy structures etc. All models are single acting, load return design. The base of all HVL cylinders must be ...

    By Hi-Force Limited based in Northants, UNITED KINGDOM. from Single Acting Low Height Pancake Cylinders Product line

  • Entec - Model T-15 - High-Efficiency Cross-Flow Turbines

    The T15 crossflow turbine is the result of more than 30years experience in rural electrification projects in Nepal, Indonesia and other countries. About 600 T15 turbines are in operation world wide. T15 turbine design is offered by PT entec as a licence for diameter 300mm and 500mm covering most MHP potentials up to 250kW (300kW at head above ...

    By Entec AG Consulting & Engineering based in St Gallen, SWITZERLAND.

  • Gilkes - Turgo Impulse Turbines

    The Turgo Impulse turbine was developed by Gilkes to be a simple impulse type machine with a higher specific speed than a Pelton. The design therefore allows a larger jet of water to be directed at an angle onto the runner.

    By Gilbert Gilkes & Gordon Ltd based in Kendal, UNITED KINGDOM. from Turgo Impulse Turbines Product line

  • Emrgy - Hydro Power Unit

    Our hydro units generate useful energy from small water flows. Unlike conventional hydropower which requires gravity drop and head pressure for effective operation, Emrgy’s technology optimizes only on the kinetic energy or velocity of the volume of water flowing through a channel. Much like a wind turbine placed underwater, the water flow ...

    By Emrgy Inc. based in Atlanta, GEORGIA (US) (USA).

  • Axial Flow Pit Turbines

    CHC has provided pit-type axial flow turbines to several projects over the years, and improved the design with each installation.  Thanks to its research and development team, CHC has perfected this equipment configuration in order to improve not only its operation and performance, but also to increase profitability for project owners.  ...

    By Canadian Hydro Components Ltd. (CHC) based in Almonte, ONTARIO (CANADA).

  • Model WHI - Harvester

    The design and engineering of the WHI Harvester VAWT evolved directly from the combination of modern computer modeling paired with field-tested results from WHI’s utility-scale prototypes installed in California, Finland and Denmark over the past 10+ years. Many key mechanical components featured in the Harvester VAWTs were born from earlier ...

    By Wind Harvest International based in CALIFORNIA (USA).

  • Cross-Flow Turbines

    The cross-flow turbine is a type of impulse turbine.  The design of this particular turbine was initially developed by Anthony Michell, an Austrian Engineer, in the early 1900’s.  The idea was further developed by Donát Bánki, a Hungarian engineer, and even later it was improved upon again by Fritz Ossberger, a German ...

    By HydroTech Engineering, LLC based in Sandy, UTAH (USA). from Cross-Flow Turbines Product line

  • AxSTREAM Platform - Axial Turbine Design Software

    The AxSTREAM platform for multidisciplinary turbomachinery design, analysis and optimization software tools provides a fully integrated and streamlined solution for the complete flow path design process of axial turbines.

    By SoftInWay Inc. based in Burlington, MASSACHUSETTS (USA). from Axial Turbine Design Software Product line

  • WindEn - Model 45 - Turbines

    The WindEn turbines are designed to suit the needs of enterprises and farmers that want to take control over their future costs of energy. Wind is a totally free of charge, and renewable, source of energy. An investment in a WindEn turbine will start to pay itself back from the day the installation is finished. With a calculated life span of 20+ ...

    By WindEn Sweden AB based in Gothenburg , SWEDEN.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you