Only show results in Massachusetts? Ok

Turbine Inlet equipment for Energy Management

  • Premium

    CECO Aarding - Gas Turbine Exhaust Ducts

    Gas Turbine Exhaust ducts are predominantly applied as a transition between diffuser and diverter systems, or between the diverter system and HRSG (inlet ducts). Our Peerless-Aarding brand Gas Turbine Exhaust Duct is engineered using the latest cold casing design, adapted to your operational conditions. With premium materials and decades of ...

    By CECO Environmental based in Dallas, TEXAS (USA). from CECO Aarding - Gas Turbine Exhaust Systems Product line

  • Premium

    ZONEL FILTECH - Gas Turbine Filter Cartridge

    The gas turbines are widely equipped in thermal power plants of the world, and the premium quality inlet air is crucial for their daily operation and maintenance. For improving the efficiency of the gas turbine and prolong the service life, the upstream filtration is necessary. Zonel Filtech provides sound quality gas turbine air inlet filter ...

  • Aradrop - Turbine Inlet Air Cooling (TIAC)

    Carefully designed by ARANER, located inside the turbine filter house after the air cooling heat exchanger… The Turbine Inlet Air Cooling (TIAC) process could produce condensate water under certain ambient conditions and this condensate water is collected by gravity just after the air cooling heat exchanger, since air speed is not so high ...

    By Araner based in UNITED ARAB EMIRATES. from Turbine Inlet Air Cooling Product line

  • Alstom - Model GT24 and GT26 - Gas Turbines

    Power producers around the world continually strive to increase their competitiveness and profitability by saving fuel, reducing operating costs, and delivering cleaner and reliable power. Alstom’s high performance advanced class gas turbines, the GT24 for 60 Hz applications and the GT26 for 50 Hz markets, deliver the efficiency, high ...

    By Alstom based in Saint-Ouen, FRANCE. from Gas Power Product line

  • Wave Dragon - Wave Energy Converter

    Wave Dragon is a floating, slack-moored energy converter of the overtopping type that can be deployed in a single unit or in arrays of Wave Dragon units in groups resulting in a power plant with a capacity comparable to traditional fossil based power plants.

    By Wave Dragon based in Copenhagen K, DENMARK.

  • MHPS - Model J-Series - Gas Turbines

    With the highly efficient, advanced J-Series gas turbines, MHPS raised the bar for combined cycle performance. The J-Series gas turbine was the first commercially available gas turbine capable of sustained operation at turbine inlet temperatures of 1600°C. The design is based on the proven G-Series gas turbines, with enhancements to the ...

    By Mitsubishi Hitachi Power Systems, Ltd. (MHPS) based in Lake Mary, FLORIDA (USA). from Gas Turbines Product line

  • Mitsubishi Hitachi Power Systems - Centrifugal Compressors (Blowers) and Expansion Turbines

    Since 1967 MHPS has provided more than 400 centrifugal compressors and more than 50 expansion turbines. They are operating as electric-generating expansion turbines, compressed air sources, etc. in geothermal power plants and nuclear power plants.

    By Mitsubishi Hitachi Power Systems, Ltd. (MHPS) based in Lake Mary, FLORIDA (USA).

  • Model CX501-KB7 (5.3 MW) - Gas Turbine-Powered Electrical Generator Sets

    The CX501-KB7 package builds on the reliable KB5 with the addition of a zero stage to the compressor inlet of the Siemens turbine. This increases mass flow and pressure ratio, thus increasing performance and efficiency and boosting power output to over 5MW.

    By Centrax Ltd based in Newton Abbot, UNITED KINGDOM.

  • Thermal Power Industry And Chemical Industry

    Mechanical services are the traditional domain of ZRE in Gdansk activity. The size of entrusted tasks, their number and level of customers’ satisfaction constitute a source of pride for the company. High qualifications of the staff and long-standing experience connected with the own production background allow to offer the wide range of ...

    By ZRE Gdansk S.A. based in Gdansk, POLAND.

  • Power Generation

    Airguard offers a robust portfolio of filters suitable for a wide range of gas turbine installations. Airguard filters help protect the turbine from pollutants in the inlet air and prolong the life of the turbine. Airguard filters also prevent degradation of the turbine to maintain performance and prevent unnecessary maintenance related to ...

    By CLARCOR Air Filtration Products, Inc. (CLC Air) based in Jeffersonville, INDIANA (USA).

  • Allied - Combustion Gas Turbine Exhaust System

    A computational domain for the gas turbine exhaust system is shown in Figure 1 below at different viewing angles. The blue region is the inlet where the exhaust gas from the gas turbine enters the diffuser duct. The diameter at the inlet is 4.877 m (16'). The inlet is then connected with a diffuser duct that gradually transforms the circular duct ...

    By Allied Environmental Technologies, Inc. based in Seal Beach, CALIFORNIA (USA).

  • Droplet Erosion

    Gas turbines are generally considered the most cost effective and relatively environment-friendly large scale power generation technology, but their capacity as well as their thermal efficiency degrades under high ambient temperature conditions. Fogging Systems provide the most cost effective technique to recover this lost gas turbine capacity ...

    By Flame Spray SpA based in Roncello (MB), ITALY. from Gas Turbines Product line

  • Innovative CHP Technologies

    The utilisation of new biomass fuels and the development of next generation combustion systems should provide the basis for more cost efficient heat as well as combined heat and power production from biomass in the future. However, the CHP technologies presently available on the market are restricted to the large (steam cycles for plants >2 ...

    By BIOENERGY 2020+ GmbH based in Graz, AUSTRIA. from Combustion Product line

  • OPTIMA - Model 1015-1020 - Hose Reel Machine

    Turbine, IRRICONTROL turbine or IRRIDOSEUR turbine

    By Irrifrance Groupe based in Paulhan, FRANCE. from Hose Reels Product line

  • Model LM6000 - Sprint Aeroderivative Gas Turbines

    Unlike most gas turbines, the LM6000 is primarily controlled by the compressor discharge temperature in lieu of the turbine inlet temperature. Some of the compressor discharge air is then used to cool high-pressure turbine components. Sprint — which stands for 'Spray Inter-cooled Turbine' — reduces compressor discharge temperature, ...

    By General Electric based in Fairfield, CONNECTICUT (USA). from Gas Turbines - Aeroderivative Product line

  • Model 8654 Series - Quick Shutoff Valve

    The 8654E100 Series Quick Shut-Off Valve is a high speed, solenoid operated shutoff valve and is designed for use on combustion or gas turbine engines. There is a single main stage inlet port, an outlet port, and pilot stage plus a vent port. The valve can be used to rapidly shut off flow and isolate the source from the turbine engine. The valve ...

    By Young & Franklin Inc based in Liverpool, NEW YORK (USA). from Isolation Valves Product line

  • Internal Air Intake Fogging System

    The internal fogging is designed in order to obtain the best results in terms of increasing the power of the gas turbines in the base-load conditions. The system obtains instantaneously greater power generation also during energy peak periods. All the materials and the equipment are made out of AISI 316 and are equipped with the necessary safety ...

    By EcoSpray Technologies S.r.l. based in VOGHERA (PV), ITALY. from Fogging Systems Product line

  • Gas Turbine Exhaust Systems

    Clyde Bergemann gas turbine exhaust systems and components provide a “Balance of Plant” Island solution (exclusive of the turbine and HRSG-boiler). Trusted Bachmann equipment is the critical link between the gas turbine exhaust flange on the one side and the HRSG inlet connection on the other side. Our exhaust systems provide all media ...

  • Model HLT-100 - Hot Air Turbine

    With the “HLT-100 compact” hot air turbine, electricity can be generated with a wood firing system from a thermal offtake of 300 kW. Due to their complexity and maintenance requirements, other systems – such as ORC systems or steam turbines – only become worthwhile as large-scale systems with a ...

    By Schmid Energy Solutions based in Eschlikon, SWITZERLAND. from Cogeneration Systems Product line

  • PBS-ENERGO - Model TG - Axial Extraction Condensing Turbines

    The design of extraction condensing TG turbines results from more than 100 years of experience in manufacturing PBS industrial turbines, featuring high efficiency and reliable operation. With minimum costs of operation, we guarantee a rapid return on the investment made. We offer turbines with one or two controlled extractions and one uncontrolled ...

    By PBS ENERGO, a.s. based in Velká Bíteš, CZECH REPUBLIC. from Turbines- Steam Turbines Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you