Turbine Inlet Equipment For Energy Management Available In Asia & Middle East
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Solar Mobile Turbomachinery (SMT) is the best solution for oil field power, remote power and trailer power in the industry, and in emergencies such as natural disasters where quick power is essential. The single trailer design is a complete mobile power plant with wide fuel composition flexibility. This solution is based on the 5.7 MWe Taurus 60 gas turbine generator set – a proven industry ...
-
PremiumManufactured by Solar Turbines Incorporatedbased in USA
Solar Digital is the global organization responsible for InSight Platform™ technology and the relentless innovation of the entire ecosystem, capabilities and customer user experience. We are obsessively customercentric with a passion for cutting edge technology. With deep expertise in machine data acquisition, cyber security, software development, OEM product knowledge, and big data ...
-
Manufactured by PBS Velká Bíteš, a.s.based in CZECH REPUBLIC
In addition to delivering its own turbines, main condenser and its pumps, PBS also provides a complete condensate management system. If requested by the customer, it also provides the exhaustion of steam from the ...
-
Manufactured by ACTech North America Inc.based in USA
Material: EN AC-AlSi7Mg0.6, Dimensions: 520 x 520 x 350 mm, Delivery: 5 weeks, Quantity: ...
-
Manufactured by Stellar Energybased in USA
The purpose of Turbine Inlet Air Chilling is to restore the power output of a combustion turbine at elevated ambient temperatures to its rated capacity or better. TIAC is especially compelling in warm climates where a turbine’s output can decrease at the same time more power is needed for comfort cooling/air conditioning. Stellar Energy’s mechanical TIAC solution is a heat transfer ...
-
Manufactured by Stellar Energybased in USA
TIAC systems can incorporate thermal energy storage (TES). Thermal energy storage allows power producers to shift the power required to run the turbine inlet air chilling system to off-peak times when power is in less demand and the value of the power sold from the power plant is at the lowest value. This increases the power available for use during peak periods, and improves the financial ...
-
Manufactured by Usha Filters Pvt. Ltd.based in INDIA
USHA Gas turbine filters are characterised by their superior filtration properties. The synthetic and Cellous media is progressively constructed, which makes for a high particle interception level. This guarantee low pressure drop and reduced energy consumption. USHA Gas turbine filters are available in the range of (F8, ...
-
Manufactured by Flame Spray SpAbased in ITALY
Gas turbines are generally considered the most cost effective and relatively environment-friendly large scale power generation technology, but their capacity as well as their thermal efficiency degrades under high ambient temperature conditions. Fogging Systems provide the most cost effective technique to recover this lost gas turbine capacity through adiabatic cooling of the gas turbine inlet ...
-
Manufactured by Eagle Filters Ltd.based in FINLAND
Eagle Filters' TurboMaster EPA is a new era in static filtration replacing ineffective and high pressure drop pulse filters to absolute cleanliness securing static filtration system without changing any construction of the air intake ...
-
Manufactured by EMW Filtertechnik GmbHbased in GERMANY
Compact filters owe their name to their compact, space-saving construction. They provide maximum media area within minimum volume, offering an optimum combination of high filtration efficiency and low pressure drop. As a result, compact filters attain long service life even when used with high volume flow rates and high inlet particulate ...
-
Manufactured by Shenyang Getai Hydropower Equipment Co., Ltdbased in CHINA
Francis turbines are built in a compact structure, with high efficiency, and can be applied to a wide range of water heads. This feature makes the Francis turbine type a widely used one around the world. The key Francis turbine components includes Runner, Distributor, Main shaft, Main shaft seal, Turbine guide bearing, Governor, among ...
-
Manufactured by Entec AG Consulting & Engineeringbased in SWITZERLAND
The digital control system DTC-Vario is the most recent development of entec for controlling, supervision, protection, data acquisition and visualisation of small hydro power stations. Based on a hardware from SAIA, entec developed the appropriate software. Entec’s long term experience in the field of small hydro power stations is reflected by versatile possibilities of this ...
-
Manufactured by Aranerbased in UNITED ARAB EMIRATES
Carefully designed by ARANER, located inside the turbine filter house after the air cooling heat exchanger… The Turbine Inlet Air Cooling (TIAC) process could produce condensate water under certain ambient conditions and this condensate water is collected by gravity just after the air cooling heat exchanger, since air speed is not so high as to drag water drops into the gas turbine ...
-
Manufactured by G.U.N.T. Gerätebau GmbHbased in GERMANY
Water turbines are turbomachines utilising water power. The Francis turbine is a type of reaction turbine which converts the pressure energy of the water into kinetic energy in the distributor and in the rotor. The water is fed in the distributor by means of a spiral housing. The flowing water is accelerated in the distributor by the adjustable guide vanes and directed onto the blades. The ...
-
Manufactured by Forney Corporationbased in USA
adVantage Duct Burners perform in the most challenging conditions. Premium components and patented technology join to perform like no other duct ...
-
Manufactured by Reivax North America, Inc.based in CANADA
The RVX Power Speed Governor System was developed for speed and power control of turbines. Besides speed regulation, they can perform all the supervision, command and automation functions required for power generation turbines. The speed governor RVX Power system can be fully customized to meet the most demanding requirements. Reivax can supply a turnkey solution or individual components, ...
-
based in USA
Unlike most gas turbines, the LM6000 is primarily controlled by the compressor discharge temperature in lieu of the turbine inlet temperature. Some of the compressor discharge air is then used to cool high-pressure turbine components. Sprint — which stands for 'Spray Inter-cooled Turbine' — reduces compressor discharge temperature, thereby allowing advancement of the throttle to ...
-
Manufactured by Atomizing Systems, Inc.based in USA
Fog cooling system basically consists of fog nozzles installed on stainless steel arrays typically placed across the section of the gas turbine inlet air ducting before or after the air filter; high-pressure stainless steel head pumps supply water from 1000 to 3000 psi (70-200 bar); pre-filter unit at pump water inlet to block big particles (bigger than 1 micron) in water; distribution feed lines ...
-
Manufactured by Piedmont Hydro Technologies LLC. (PHT)based in USA
PHT specializes in small hydro control systems. We integrate commercially available components from trusted names, with custom software and programming specific to each plant, to provide reliable, cost-effective solutions. Standard features reduce cost and save time, while ensuring all aspects of your plant work together for optimal results, from under 100kW, to over 10 MW. PHT’s proven PLC ...
-
Manufactured by Turboden S.p.Abased in ITALY
The ORC unit is a system based on a closed-loop thermodynamic cycle for the generation of electric and thermal power, especially suitable for distributed generation. ORC systems can generate electric and thermal power exploiting multiple sources, such as renewables (biomass, geothermal energy, solar energy), traditional fuels and waste heat from industrial processes, waste incinerators, engines ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you