Turbine Installation Equipment For Energy Management
-
Manufactured by Aeolos Wind Energy Ltdbased in UNITED KINGDOM
Aeolos-H 3kw wind turbine used the permanent magnet generator without tail design. The wind turbine could face the wind automatically through the yaw motor and anemometer. This design was usually applied in the 10kw or 20kw wind turbines. It can maximize the annual power output of 3kw wind turbine. This 3000w wind turbine can be used for off grid application with DC 120v output and grid tie ...
-
Manufactured by Litostroj Powerbased in SLOVENIA
Design principle and range of use: Kaplan turbine is a double-regulated turbine. It is equipped with a Kaplan runner with variable-pitch blades that is hydraulically optimized for a wide range of discharge and a relatively wide range of head and is combined with regulated guide vanes, which makes a Kaplan turbine suitable for a wide range of discharge and head. The governor enables optimizing the ...
-
Manufactured by Siapro d.o.o.based in SLOVENIA
Turbines can be installed horizontal or vertical. Stream of water that flows from the nozzle come with high speed tangential to the turbine blades, which are welded two parts in the form of single or double dipper. The amount of water that flows into the turbine blades can be controlled. Doing so we are changing the flow of water. Pelton turbines may attain up to 250mW of power, the efficiency of ...
-
Manufactured by Soluxbased in CHINA
SL-PL002 Solar Street light 4,5m Fully automatic operation. Wireless controls and monitoring. The best qualit in China. Fully automatic operation. The Light switches ON in the evening and switches OFF in the morning. Wireless controls and monitoring allow for smart dimming schedules to save energy. Presence Detector Optional. Battery Gel Special Solar slow discharge for a 4-5 Days back up. More ...
-
Manufactured by Swordfish Energy Corporationbased in CANADA
The revolutionary Swordfish Horizontal Axis turbine is an advanced hydrokinetic turbine design that has the potential to bend the carbon-emissions curve and become a key component in reaching global net-zero ...
-
Manufactured by Smart Hydro Power GmbHbased in GERMANY
This turbine is installed on the bed of the river or canal. Especially suitable for installation in canals or behind traditional hydro power ...
-
Manufactured by Benz Air Engineering Co. Incbased in USA
Benz Air Boiler Islands are custom designed and installed gas turbine sets that protect boiler plants from power outages by ensuring no steam is lost during an outage. This solution also increases heat recovery by utilizing the turbine exhaust to preheat the air for better boiler combustion. Once installed, the gas turbines will improve efficiency, save electricity, and allow your system to ...
-
Manufactured by Cryo Purbased in FRANCE
Adapted to the recovery of associated gas at small-scale oil wells, the Cryo Flare solution enables to eliminate flare gas and to create extra revenues by producing LNG (and LPG) which can be easily transported and sold to remote markets. It is an environment-friendly alternative to routine flaring of small gas ...
-
Manufactured by Geofrost ASbased in NORWAY
The ice plug concept developed and tested by GEOFROST, makes it possible to temporarely close a water filled ...
-
Manufactured by Nordic Wind Technology ApSbased in DENMARK
Suzlon inducted the S82 turbine in 2006 and phased out production in 2015. During these years a combined capacity of around 3034.5 MW was installed worldwide. S82 turbines contain an asynchronous generator with a SFS (Suzlon Flexi Slip) system enabling the generator to run with a high slip and operate within a restricted speed range. This – in combination with the pitch system – makes ...
-
Manufactured by Leading Edge Turbines Ltdbased in UNITED KINGDOM
The LE-300 wind turbine, a compact and quiet horizontal axis turbine, is considered to be the most rugged reliable small wind turbine in its class. All at an affordable price! There are two versions to choose from: the LE-300 for off-grid home and industrial applications on land; and the LE-300 Marine, fully optimised for marine conditions. Manufactured in the UK, the LE-300 wind turbine ...
-
Manufactured by OnPower, Incbased in USA
OnPower, Inc.’s Power Generation Packages incorporate the Siemens SGT-A05 family of Aeroderivative Industrial Gas Turbines, previously the Rolls-Royce Industrial 501-K. The more than 2,500 SGT-A05 Series industrial gas turbines installed around the world under Rolls-Royce and Siemens have accumulated over 65 million operating hours. This experience further demonstrates the dependability ...
-
Distributed by Ware, Inc.based in USA
With a rich heritage in steam that goes back to 1952, WARE represents single-stage, steam turbines of proven design for mechanical drive and electric power generation for petrochemical, marine and other industrial services. Over 20,000 turbines have been installed providing many years of operating experience driving pumps, fans, blowers, compressors, mills, electric generators and other ...
-
based in CHINA
The hydraulic turbine is a power machine that converts the energy of water flow into rotating mechanical energy. The Francis turbine can operate at a water head height of 30-700 meters. The output power ranges from several kilowatts to 800 MW. It has the widest application range, stable operation and high efficiency. Francis turbine is divided into two types: the vertical Francis and the ...
-
Manufactured by Llealbased in SPAIN
The stand agitators are dispersion units prepared for mounting on different supports depending on the location required for the process: it can be fixed to a wall, column or floor or have a mobile support. They are designed to effectively resolve mixing, dissolution, dispersion and homogenisation operations, depending on the type of turbine that is installed. Depending on the process, it can be ...
-
based in UNITED KINGDOM
As expert wind turbine blade maintenance specialists, GEV Wind Power have a wealth of knowledge and experience when it comes to improving turbine productivity through the installation of retrofits and upgrades. ...
-
Manufactured by TESUPbased in TURKEY
Seize control of your home’s energy destiny with our comprehensive solution. Seamlessly integrate power, wind, and solar data, and take command from anywhere with your mobile device. With the TESUP V7 energy system, the future is now at your ...
-
Manufactured by TESUPbased in TURKEY
Capable of generating up to 7 kW of power and providing a daily energy output of up to 168 kWh. TESUP H7 is the world's most preferred horizontal wind turbine, capable of generating up to 7 kWh of electricity per hour. It's very robust and durable; capable of operating in extreme weather conditions. Designed and manufactured by the world's leading household wind turbine and solar panel ...
-
Manufactured by GE Power & Waterbased in USA
The GE nuclear power conversion solutions for large and very large reactors are based on our Arabelle steam turbine technology platform. Arabelle steam turbines deliver power from 700MW to 1,900MW in both 50 and 60 Hz cycles and can be adapted to any heat sink conditions with a choice of low pressure modules and types of last-stage blades. From its unique single-flow steam expansion design that ...
-
Manufactured by LTI ReEnergy CleanTech GmbHbased in GERMANY
Our pitch drive components are more than 60.000 times installed, worldwide. We are able to provide our partners products for on- and off-grid turbines up to 6 MW. This advantage results into a market share of more than 25 % in electrical pitch applications globally. Our wind dedication is constantly enhanced by innovations and a trendsetting of the design of electrical pitch ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you