Only show results available in Virginia? Ok

Turbine Monitoring equipment for Energy Management

  • Premium

    Model ISeries - UV-light Videoscope

    ISeries UV Videoscopes are professional robust devices suited for use in such critical areas as: Aircraft turbine inspections, Building Engineering, Gas turbine inspections, Railway and Train technology, Shipbuilding industry, and many others. They were specifically designed to inspect defects of hard-to-reach areas using dye penetration testing. ...

    By Medit Inc. based in Winnipeg, MANITOBA (CANADA). from UV-light Videoscope Product line

  • Ventech - Model VCOM-W 1A - Wind Turbine Condition Monitoring Systems

    The VCOM-W 1A system is designed to be permanently installed in the nacelle of the turbine being monitored. This gives by far the most comprehensive coverage of drive train faults, and is the most common configuration for wind turbine condition monitoring systems. Whilst each installation is configured specifically to the actual application, ...

    By Ventech Systems Ltd. based in UNITED KINGDOM.

  • Turbine Marine - Model TM 1450 - Pleasure/Poker Run

    Turbine engines are completely disassembled and inspected by our in-house technicians with over 25 years of turbine maintenance and turbine engine development experience from the U.S Army. Every engine’s internal parts are serviced, or replaced, and brought back to flight specifications to maximize longevity and engine life in the harsh ...

    By Turbine Marine Inc based in Pompano Beach, FLORIDA (USA).

  • Gas Turbines

    UPS offers expert, cost-effective support for gas turbines from a wide range of manufacturers – from General Electric and Siemens to ABB. Recognized as an industry leader with a list of successful projects that includes the repair of more F-Class gas turbines than any other non-OEM service provider, UPS offers a comprehensive range of ...

    By Universal Plant Services based in Deer Park, TEXAS (USA). from Gas Turbines Product line

  • Orbital - Model 3 - TMC3 Wind turbine controller

    The TMC3 controller was exclusively designed for small and medium-sized wind turbines, typically from 10 kW up to 1 MW. It’s an all in one concept that combines powerful control, supervision, communication and data logging. Different communication interfaces can be used for monitoring and setting parameters. USB and Ethernet (Modbus TCP) are ...

    By Orbital A/S based in Skjern, DENMARK. from TMC3 Wind turbine controller Product line

  • SUREnergy - Model 25kW - Wind Turbine

    Farmers, Ranchers, Vineyards, Stores, Small Manufactures or Processors, Schools, Colleges and Universities, Hotels, Rest Areas, Pumping and Water Treatment Facilities, Sports Centers and Golf Courses The 25kW direct drive wind turbine delivers superior annual energy production. This innovation 25kW PMG direct-drive wind turbine also features ...

    By SUREnergy based in Sandusky, OHIO (USA).

  • Spica - Wind Turbine Oil Level Monitor / Wind Turbine Temperature Monitor

    The Level Monitor provides added surveillance to existing, or new, wind turbines where critical parts need to be monitored (e.g. bearings or cooling liquid).  Due to the magnets on the backside of the module, the Level Monitor can easily be mounted anywhere on a metal (iron) surface. All connections are done through prefabricated cables with ...

    By Spica Technology ApS based in Silkeborg, DENMARK.

  • TongYu - Forging Wind Turbine Main Shaft

    Produce as per Drawings and Requirements. ?Capacity: ? Forgings 1ton - 350ton, Rod Max Length: 25m, Tube Max Length: 12m, Pie Max Diameter: 5.5m, Ring Max Diameter: 7m; ? Castings: 1ton - 150ton, all kinds of gray iron, ductile iron, vermicular iron, alloy iron and anti-wear, corrosion, heat resisting iron. ? Complete production chain, from ...

  • Spica - Wind Turbine Temperature Monitor

    The temperature Monitor provides added surveillance to existing or new construction/machines (e.g. wind turbines) where critical parts need to be monitored (e.g. bearings or cooling liquid).  Due to the magnets on the backside of the module, the Temperature Monitor can easily be mounted anywhere on a metal (iron) surface. All connection is ...

    By Spica Technology ApS based in Silkeborg, DENMARK.

  • Remote Control Box

    The operating data exchange system (D.E.I.E.) is a control/monitoring unit that manages the remote control and monitoring of decentralised generating installations. Control cabinet for local spot generation, with measurements capacity for Wind mills, Photovoltaic generation, Micro generation, Gas turbine, Hydraulic generation.

    By Ensto Group based in Porvoo, FINLAND. from Remote Control Box Product line

  • WindTurbine Remote Monitoring

    To make wind energy competitive with other power plants in the near future, enhancements of availability, reliability and lifetime of the wind turbines are required. Significant improvements in this field can be seen in efficient maintenance and repair strategies on the basis of condition monitoring systems.

    By Brüel & Kjær Vibro GmbH based in Darmstadt, GERMANY.

  • Air Force - Model 10 - Wind Turbine

    SIL Level 3 independent safety control monitoring.Intelligent wind tracking adapts to wind conditions.Multiple rotor speed limiting systems.Ground level control panel housing electronics, inverter & hydraulics.Remote monitoring and data logging.Hydraulically raised tower.All UK designed & manufactured.GenDrive inverter (UK design & ...

    By FuturEnergy Ltd based in Stratford upon Avon, UNITED KINGDOM.

  • ImmerSUN unit

    An immerSUN unit is a cost effective way to heat your water with surplus energy from your Solar PV System or Wind Turbine. Excess electricity not used by the property is directed to your immersion heater to heat your hot water. The immerSUN monitors both the electricity generated by the microgeneration system and that which is coming from or going ...

    By Scenergy Limited based in Louth, UNITED KINGDOM.

  • Iris - Remote Monitoring and Control System

    Remote configuration & operation of system online. Performance data (Real-time and historical) including wind speed and power production. Remote shut down and restart of the turbine, invaluable in areas where the weather changes quickly and severely. Collection of data, including RPM, voltage levels, average wind speed, export power and state ...

    By Orenda Energy Solutions Ltd. based in Edinburgh, UNITED KINGDOM.

  • Woodward - Safety Systems

    Woodward’s ProTech-GII is an overspeed safety device designed to safely shut down steam, gas, and hydro turbines upon sensing an overspeed or over acceleration event. This device accurately monitors turbine rotor speed and acceleration via active or passive MPUs (magnetic pickups) and issues a shutdown command to the turbine’s trip ...

    By Woodward, Inc. based in Fort Collins, COLORADO (USA). from Safety Systems Product line

  • Orbital - OrbiVib2

    OrbiVib2 is designed for vibration measurements in the frequency range 0.1–100 Hz. Up to 8 independent configurable frequency bands can be used to monitor and supervise accelerations in the frequency range of interest. The band-pass filter parameters, the vibration excess values and the reaction times can be configured individually for each ...

    By Orbital A/S based in Skjern, DENMARK. from OrbiVib2 Product line

  • Flowtechnik - Model G2Ax - Aluminium for Petroleum Based Fluids

    G2 ATEX Aluminium series Turbine flowmeter for diesel and petroleum based fluids. Ideal for monitoring the use of diesel and petroleum based products dispensed from bulk storage, reducing product consumption, theft and wastage. Their compact design allows easy installation, on site or field calibration for different fluid densities and viscosities ...

    By UK Flowtechnik Ltd. based in Nottingham, UNITED KINGDOM. from Aluminium for Petroleum Based Fluids Product line

  • Spica - Model PT100 - Retrofit Controller

    Valuable retrofit. By replacing your old control system with the Spica Retrofit Controller you can reduce downtime as troubleshooting becomes faster and more qualified. With The Spica Retrofit Controller wind turbine owners can replace the old control system with a new controller that offers the newest standards in communication and parameter ...

    By Spica Technology ApS based in Silkeborg, DENMARK.

  • Gas Turbines

    The compressed intake air and biogas are ignited in the combustion chamber. The gases then pass through the turbine at high pressure and drive the generator. A turbine installation consists of a complete turbine assembly with gas compressor and monitoring equipment, with or without a heat exchanger for producing hot water. Biogas Systems AB ...

    By Biogas Systems AB based in Sunne, SWEDEN.

  • Primus Air Breeze - Wind Turbine

    AIR Breeze provides energy you can count on in challenging conditions. This field-proven unit is engineered for battery-charging applications in coastal to desert to Arctic environments. It delivers the energy you need for communications, offshore structures, sailing or remote monitoring, to name a few. With optimized electronic controls, AIR ...

    By Primus Wind Power based in Lakewood, COLORADO (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you