Turnkey Power Articles

  • High-voltage specialist Smith Brothers secures contract with CHP giant

    High-voltage power contractor Smith Brothers has secured an Independent Connection Provider (ICP) contract with sustainable energy specialist P3P Partners, marking the electrical engineering firm’s first foray into the fast-growing combined heat and power (CHP) market.A leading provider of CHP services, P3P develops energy-efficient centres across the UK and has previously delivered ...

  • No Place Is Too Far

    The remote location of hydropower stations is often a great challenge when major repair work is necessary. The refurbishment of a large generator in the Scottish Highlands shows how Sulzer finds cost-effective service solutions even in places miles from nowhere. Much of the UK hydroelectric capacity was built during the 1950s. These installations have performed extremely well, especially ...


    By Sulzer Ltd.

  • Renovation of Dalkia’s Cogeneration Plant at Bron - Case Study

    In 2009 Dalkia France informed Clarke Energy that it was going to replace their cogeneration plant at the Bron Parilly site, of which they are the operator. This was the first time Clarke Energy renovated a cogeneration plant on site. Three GE’s Jenbacher JMS616 GS-NL gas fuelled power plants were renovated at site for this ...


    By Clarke Energy

  • 2 MWe Biomass Power Plant Case Study

    This 2 MWe Biomass Power Plant is one of the turnkey products of Biomass Power. The plant was fully commissioned in September 2007. The plant has a capacity of 11 MW thermal and rated at 2MWe producing 15,700 MWh of green electricity per year, 100% of which is exported to the grid. The fuels used are from forestry and agricultural residues, wet woodchips, compost oversize, straw and miscanthus, ...


    By Biomass Power Limited (BPL)

  • Biomass fired thermal oil heater case study

    This 12 MWth output Biomass Power Plant is one of the turnkey products of Biomass Power. The plant was fully commissioned in December 2006. The system has a capacity of 12 MW thermal output producing up to 10MWth of 300°C 10 Barg pressure hot oil, up to 10 tonnes per hour of steam and 2 MWth of 200°C hot air. This is all achieved from one grate heating three separate heat exchanges. The ...


    By Biomass Power Limited (BPL)

  • Innovative contractual structures for inter-organisational systems

    This paper tests the principal-agent theory in the context of contracting practices for the development of large-scale engineering projects. Five hypotheses are derived from the principal-agent theory regarding the propensity to use behaviour-based contracts versus outcome-based contracts function of the project owner's risk aversion and monitoring competencies, of the goal congruence between ...


    By Inderscience Publishers

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you