Only show results in Virginia? Ok

Waste Gas equipment for Energy Management

  • Premium

    AEREON - Steam Assisted Flares

    Steam assisted flares are flares designed to dispose of heavier hydrocarbon gases which have a tendency to smoke. In order to prevent smoke formation, steam is injected into the waste stream using peripheral steam rings, center stream spargers and/or inner induction tubes. Steam flares are used in applications where high pressure steam is ...

    By AEREON based in Austin, TEXAS (USA). from Steam Assisted Flares Product line

  • Premium

    AEREON - Flame Ring Flares

    Carbon dioxide is often used in fire extinguishers and snuffing systems with the intention of effectively extinguishing flames. When CO2 gas is a large percentage of a waste gas stream, at times it proves difficult to maintain a lit flare without the use of assist gas or a properly designed flame ring. Flare Industries’ industry-proven Flame ...

    By AEREON based in Austin, TEXAS (USA). from Flame Ring Flares Product line

  • Premium

    AEREON VariMach - Model VM-SA - Variable Orifice Sonic Flare

    The VariMach sonic flare tip features spring-actuated variable sonic nozzles to allow the exit area to vary with pressure, ensuring constant sonic velocity of the exiting waste gas. This industry proven technology guarantees sufficient inspiration of air to ensure 100% smokeless combustion and infinite turndown. Radiation levels are also minimized ...

    By AEREON based in Austin, TEXAS (USA). from Variable Orifice Sonic Flare Product line

  • Premium

    AEREON - Gas-Assist Flares for the Shale Play

    Gas-assisted flares are flares that use an additional source of fast-moving gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. Typically utilized when you have a readily available source of natural gas, and a preference to not use a ...

    By AEREON based in Austin, TEXAS (USA). from Gas-Assist Flares for the Shale Play Product line

  • Premium

    AEREON - Model Mach-1 - Fixed Orifice Sonic Flares

    Mach-1 sonic flares are used in both onshore and offshore applications to dispose of high pressure waste gas streams with high smokeless capacities. By efficiently inducing high volumes of ambient air for more complete, smokeless combustion at sonic velocities, this advanced flaring technology allows for reduced levels of radiation and can be ...

    By AEREON based in Austin, TEXAS (USA). from Fixed Orifice Sonic Flares Product line

  • Premium

    AEREON - Air-Assist Flares

    Air assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to combine with the process gas, which passes through its own secondary riser. Upon mixing, the high-pressure air flow causes turbulence in the waste gas stream, improving ...

    By AEREON based in Austin, TEXAS (USA). from Air-Assist Flares Product line

  • Premium

    AEREON - Air-Assist Flares for the Shale Play

    Air-assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to combine with the process gas, which passes through its own secondary riser. Upon mixing, the high-pressure air flow causes turbulence in the waste gas stream, improving ...

    By AEREON based in Austin, TEXAS (USA). from Air-Assist Flares for the Shale Play Product line

  • Premium

    Exhaust Gas Heat Exchangers (EGHE)

    Exhaust gas heat exchangers (EGHE) utilise waste heat from the exhaust of the GE's Jenbacher gas engine cogeneration plant. They are typically located adjacent to the engine or are mounted on the roof of a containerised combined heat and power unit. They are present in a wide range of different applications and along with the ...

    By Clarke Energy based in Liverpool, UNITED KINGDOM. from Exhaust Gas Heat Exchangers (EGHE) Product line

  • Premium

    Shand & Jurs Biogas - Model 97200 - Flame Check

    The Shand & Jurs Biogas 97200 Flame Check provides an in-line barrier against flame flashback in small gas lines. They are typically installed in pilot lines supplying fuel burning devices used in flares and waste gas burners. They are also used in vent piping servicing manometer pressure taps and diaphragm regulators.

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Flame Check Product line

  • Premium

    EnviThan - Biomethane // Our gas upgrading technology

    Before biogas can be fed into the natural gas grid or used as a fuel, it must first be upgraded to natural gas quality. Our answer to the requirements of the future is therefore EnviThan – our integrated solution from organic waste to the filling station pump!

    By EnviTec Biogas AG based in Lohne, GERMANY.

  • Premium

    Shand & Jurs Biogas - Model 97310 - Enclosed Flare

    The Shand & Jurs Biogas 97310 Enclosed Burner removes harmful emissions from waste gas streams. Typical applications include fermentation off gas piping systems such as anaerobic digesters. This unit is specifically designed to bring emissions levels to within allowable limits as dictated by customer requirements or governmental bodies such ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Enclosed Flare Product line

  • Premium

    Shand & Jurs Biogas - Model 97301 - Waste Gas Flare

    The Shand & Jurs Biogas 97301 Waste Gas Burner is specifically designed for dependable 'Flaring' operation that utilizes low BTU anaerobic digester waste gases. Typical applications include anaerobic digesters, lagoons, landfills and methane offgas from other fermentation processes. The 97301 efficiently incinerates waste gases thus ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Waste Gas Flare Product line

  • Premium

    Shand & Jurs Biogas - Model 97300 - Waste Gas Burner

    The Shand & Jurs Biogas 97300 Waste Gas Burner is specifically designed for dependable 'Flaring' operation that utilizes low BTU anaerobic digester waste gases. The 97300 efficiently incinerates waste gases thus minimizing odors and VOC’s. The stoichiometric pilot ensures that a proper air to fuel mixture is maintained throughout the ...

    By Shand & Jurs (L&J Technologies & L&J Engineering) based in Hillside, ILLINOIS (USA). from Waste Gas Burner Product line

  • Premium

    Shand & Jurs Biogas - Model 97300T - Waste Gas Burner with Touch Screen Control Panel

    Designed for complete automatic operation of the entire Flare System, the Shand & Jurs Biogas 97300T Waste Gas Burner and Touch Screen Control Panel is specifically designed to operate efficiently with low BTU anaerobic digester waste gases. The 97300T efficiently incinerates waste gases thus minimizing odors and VOC's. The stoichiometric ...

  • Premium

    Shand & Jurs Biogas - Model 97301T - Waste Gas Burner with Touch Screen Control Panel

    The Shand & Jurs Biogas 97301T Waste Gas Burner is specifically designed for dependable 'Flaring' operation that utilizes low BTU anaerobic digester waste gases. Typical applications include anaerobic digesters, lagoons, landfills and methane offgas from other fermentation processes. The 97301 efficiently incinerates waste gases thus ...

  • Process Gas Boilers

    The use of Process Gas Boilers in process gas cooling is widespread in industrial plants and represents an important market for FBM Hudson Italiana. FBM Hudson Italiana is specialised in fire tube waste heat boilers  FBM Hudson Italiana, manufacturer of Process Gas Boilers, started it’s activity in the ‘60s. In 1998 FBM Hudson ...

    By FBM Hudson Italiana (SPA) based in Terno d’Isola (BG), ITALY.

  • Centrotherm - Model CT-BW - Burner Washer

    The CT-BW point-of-use abatement systems set global standards in waste gas abatement. They are highly efficient system used in CVD and etching applications for photovoltaic, semiconductor and related industries. As new process tools and technologies with highly corrosive gases and increasing gas loads are introduced, further improvements in ...

    By Centrotherm Clean Solutions GmbH & Co. KG based in Blaubeuren, GERMANY. from Burner Washer Product line

  • Waste Heat Boilers

    Energy can be recovered from the exhaust gas of diesel engines, gas engines, gas turbines, and many industrial processes. The waste heat boiler design will vary greatly depending on the duty - sometimes having to cope with heavy dust loads, corrosive gases, and high temperatures. Darley & Associates have the experience to guide ...

    By Darley & Associates based in Stamford, UNITED KINGDOM.

  • Peerless-Aarding - Gas Plant Diverter Dampers

    Diverter dampers are isolation devices that are commonly used in heat recovery steam generator (HRSG) exhaust stack applications. The Peerless-Aarding brand Gas Plant Diverter Damper can be configured in a low-leak or zero-leak design, and a toggle-type or pivot style diverter damper for HRSG, waste heat recovery, natural gas turbine, and other ...

    By Aarding Thermal Acoustics based in Nunspeet, NETHERLANDS. from Gas Plant Diverter Dampers Product line

  • Gas Compressor Stations

    Recovered Energy Generation (REG) Solutions for Gas Compressor Stations. Ormat is the only solution provider for energy recovery systems on gas pipeline compressor stations. Our Recovered Energy Generation (REG) units convert waste heat from the exhaust of gas turbine-driven compressors into electricity for sale to local utilities or for ...

    By Ormat Technologies, Inc. based in Reno, NEVADA (USA). from Gas Compressor Stations Product line

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you