AEREON Waste Gas Equipment For Energy Management
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Air assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to combine with the process gas, which passes through its own secondary riser. Upon mixing, the high-pressure air flow causes turbulence in the waste gas stream, improving mixing, and ultimately combustion efficiency. These ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The Model 100 Continuum Ignitor utilizes a high voltage electric arc to ignite a combustible air/gas mixture. This arc typically occurs every 20 seconds for a two second duration (timing is adjustable). The Continuum provides a spark inside a ‘slipstream’ chamber that diverts a portion of the waste gas to create a combustible air/gas mixture. This allows the Continuum ignitor to ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Steam assisted flares are flares designed to dispose of heavier hydrocarbon gases which have a tendency to smoke. In order to prevent smoke formation, steam is injected into the waste stream using peripheral steam rings, center stream spargers and/or inner induction tubes. Steam flares are used in applications where high pressure steam is available on site. Steam flares are typically found in ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Cyclone Series Air-assisted flares are comprised of two risers (waste gas and air) and a blower system that provides supplemental combustion air. Air is fed by the blower into the air riser, to eventually combine with the process gas, which passes through its own secondary riser and is distributed at the flare tip through a proprietary AEREON Starfire burner tip. Upon mixing at the flare ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Carbon dioxide is often used in fire extinguishers and snuffing systems with the intention of effectively extinguishing flames. When CO2 gas is a large percentage of a waste gas stream, at times it proves difficult to maintain a lit flare without the use of assist gas or a properly designed flame ring. Flare Industries’ industry-proven Flame Ring Flare Technology is recommended in low-BTU ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Triton sonic flare technology allows for safe, efficient and smokeless flaring at elevated oil and gas production rates by injecting sea water into the flame envelope. High pressure sea water injection reduces flare emissions, helps minimize overall radiation levels from the flame, abates combustion noise, and preserves flame characteristics during high wind events. The Triton sonic flare is ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Inferno Series Gas-assisted flares are flares that use an additional source of high pressure gas at the flare tip to mix with the waste gas and create additional turbulence to ensure adequate mixing with air, which in turn provides for smokeless combustion. The waste gas is further distributed at the flare tip through AEREON's proprietary Starfire burner, optimizing gas and air mixing. ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
The dynamic (velocity) seal is a simple innovation which ensures significant cost savings over time. The reverse conical baffle design reduces flow area in the flare tip while simultaneously increasing purge gas velocity. In combination with the dynamic seal, a constant flow of purge gas will maintain a seal in flare system, ensuring that air infiltration does not occur. A vortex effect is ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Mach-1 sonic flares are used in both onshore and offshore applications to dispose of high pressure waste gas streams with high smokeless capacities. By efficiently inducing high volumes of ambient air for more complete, smokeless combustion at sonic velocities, this advanced flaring technology allows for reduced levels of radiation and can be placed at lower, less visible elevations, allowing for ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Hydrogen sulfide or H2S is a lethal gas generated in refineries, petrochemical plants, and gas handling facilities. Sulfur recovery units produce tail gases that contain relatively substantial amounts of H2S. AEREON designs a special type of incinerator, designed to eliminate the H2S components, while inhibiting the creation of corrosive acid by-products. Systems of this nature typically include ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Gas-assisted flares are comprised of two risers (waste gas and assist gas) and an assist gas distribution ring at the tip that provides turbulence with combustion air and waste gas at the flare tip. Upon mixing, the increased turbulence in the waste gas stream, improves combustion efficiency and smokeless performance. These flares generally dispose of heavier waste gases which have a greater ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
AEREON's Momentum Series of non-assist flares provide smokeless performance without the need of additional air-blowers or assist gas for both high pressure and low pressure gas streams. Leveraging the increased momentum of gas that is passed through a simple nozzle or restricted opening, the waste gas intimately mixes with the ambient air and provides for smokeless operation while meeting all ...
-
Manufactured by AEREON, part of Cimarron groupbased in USA
Utility flares are one of the most common and basic flare systems. Utility flares are employed in applications which do not require smokeless burning or in applications where smokeless flaring can be achieved without the use of an additional assist medium. Utility flares therefore, do not require auxiliary gas streams such as steam or air; two fluids normally used to improve smokeless capacity. ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you