Waste Heat Boiler Articles

  • Case study - Waste heat generates steam and savings

    OVERVIEW A coil coating facility purchased a new a 15,000 SCFM Regenerative Thermal Oxidizer (RTO) which had a nominal heat transfer efficiency rate of 90% thermal energy recovery. It was designed with supplemental fuel injection (SFI) which is used during low VOC loading conditions, to help save fuel cost.  The facility was looking for additional ways to decrease their exhaust ...

  • Mawera inside story – biomass case study

    With more than 30 years’ experience in the UK market, Mawera UK has supplied and installed wood burning boilers to numerous companies, turning wood-waste into heat for factory, office and process heating and helping companies recover the cost of their boilers through compliance with the RHI. To support progress and innovation, Mawera maintains its own levels of technology and combustion ...


    By Mawera (UK) Ltd

  • ElectraTherm Green Machine generates power from biomass in Italy - Case Study

    Site: Badia Prataglia, Italy Gross Power Output Avg: 46kWe Hot Water Input Range: 110°C Hot Water Flow: 10 l/s Thermal Input to the Green Machine (kW thermal): 500kWt ElectraTherm commissioned a Green Machine to generate emission-free electricity from biomass in Badia Prataglia, Italy. The facility operates a biomass boiler burning a mix of sawdust and ground up waste wood from ...


    By ElectraTherm

  • Thermal Energy International Raises The Bar On Thermal Efficiency At Stand H41 At Energy Solutions Expo

    Thermal Energy International Inc. (TEI) will be exhibiting its range of awarding winning energy efficiency products at stand H41 at the Energy Solutions Expo at Olympia, London on the 11th and 12th October.  TEI’s products include its GEM venturi orifice steam traps and its flue gas condensing heat recovery ...

  • Energy and exergy analyses of a sulphation unit in a powder detergent plant

    In this study, where the actual plant operational data were utilised, the energy and exergy analyses of a sulphation unit in a powder detergent plant with a production rate of 4400 kg /h, located in Izmir, were performed. The energy and exergy losses were determined in four components of the sulphation unit and the overall energy and exergy efficiencies were calculated as 73 and 56%, ...


    By Inderscience Publishers

  • Move over Saudi Arabia. Here comes Nash and his Dad!

    As a parent, I don’t expect world changing results when I gripe at my kids. I’m happy if they at least leave a path through the dirty clothes on their bedroom floors. If you’re like that too, you’ll be a little sheepish when you hear the story of inventor and journalist Pierce Hoover. His 13-year-old son, Nash, kept forgetting to shut off the lights, so Hoover made a very ...

  • Case study - Oxidizer energy recovery options

    Overview The mainstream media today is full of allusions to energy awareness and conservation. Just as visible these days are media references to astronomical dollar figures that can boggle the mind. This article does ...

  • Saint-Vincent Hospital, Ottawa, Ontario, Canada

    Boiler/Cogen Heat/Energy Recovery Application Thermal Energy installed designed and implemented an integrated FLU-ACE heat recovery system with cogeneration unit for efficient electrical power generation and an overall reduction in energy consumption. The installation consists of a natural gas fueled engine with a 425 kW generator, waste heat boiler, and FLU-ACE system processing combined flue ...

  • Gatineau Hospital, Gatineau, Quebec, Canada

    Commercial Boiler Application Thermal Energy installed FLU-ACE system to recover 5.5 mmBTU/h of waste heat from the flue gases emanating from three Volcano water tube boilers. The single 16 ft. high FLU-ACE tower replaced three independent boiler steel stacks. The installation is unique in several ways, including the very high temperature of the flue gases (up to 650 °F) processed by the ...

  • Ottawa Hospital, Ottawa Heart Institute, Ottawa, Ontario, Canada

    Boiler Plant Application Objective The turnkey FLU-ACE waste heat recovery system was installed by Thermal Energy on four boiler exhausts from a power plant which produced a peak (winter) steam rate of 70,000 lbs/h. The system was designed to recover 10 mmBTU/h of otherwise wasted energy. The recovered heat is used to heat the the world-famous University of Ottawa Heart Institute ...

  • Maximising biogas in anaerobic digestion by using engine waste heat for thermal hydrolysis pre-treatment of sludge

    EXECUTIVE SUMMARY Dublin's Ringsend WWTP was designed to serve a population of approximately 1.2 million pe with a sludge production of 37,000 dry tonnes per year after upgrading to full secondary treatment. Several technical solutions were put forward as part of a Design, Build, Finance and Operate (DBFO) competition, with the chosen solution being a proposal by Black and Veatch for a ...


    By Cambi Group AS

  • Case study - Keeping ethanol production green

    OVERVIEW Originally published in Pollution Engineering Magazine. In an effort to reduce the world’s dependence on fossil fuels, there has been a major push towards alternatives. Ethanol has been at the forefront of this movement because it reduces greenhouse gas emissions from automobiles and its production has a positive net energy balance. The homegrown fuel also ...

  • Cleaning Up Gasification Syngas

    Documento sin título ...


    By Merichem Company

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you