Waste Heat Boiler Articles
-
Cranswick PLC Food Manufacturing CHP Plant, UK - Case Study
FTSE 250 company Cranswick PLC is one of the largest food producers in Britain, who have launched a sustainability strategy to become the world’s most sustainable meat business. The company’s largest site at Preston is in operation 24/7 and is heat and power intensive therefore Cranswick decided it wanted to make its energy infrastructure more competitive. Clarke Energy worked in ...
-
Combined Heat and Power Pharmaceutical - Biogen Idee - Case Study
OWNER Biogen Idee LOCATION Cambridge, Massachusetts, USA PRODUCT Taurus'" 60 (5.7 MWe) Gas Turbine CUSTOMER VALUE Sustainable Energy Production Biogen Idee is a global leader in the discovery, development, manufacturing and commercialization of innovative therapies. In 2003, the pharmaceutical company needed to do something to ensure the critical supply of steam and electricity to its Kendall ...
-
Ergon, Inc. - 4.72 MW CHP System - Case Study
Quick Facts LOCATION: Vicksburg, Mississippi MARKET SECTOR: Crude Oil Processing FUEL: Natural Gas MAX CAPACITY: 4.72 MW IN OPERATION SINCE: 1994 EQUIPMENT: Solar 60 Gas Turbine Ideal Electric Co. Generator VolcanInternational Waste Heat Boiler Economizer and Exhaust System Davis Combustion Systems Duct Burner Effox Diverter Valve USE OF WASTE HEAT: Create Steam for Refinery YEARLY ...
-
Case study - Waste heat generates steam and savings
OVERVIEW A coil coating facility purchased a new a 15,000 SCFM Regenerative Thermal Oxidizer (RTO) which had a nominal heat transfer efficiency rate of 90% thermal energy recovery. It was designed with supplemental fuel injection (SFI) which is used during low VOC loading conditions, to help save fuel cost. The facility was looking for additional ways to decrease their exhaust air temperature ...
-
A new method estimates TEG purity versus reconcentrator temperature at different levels of pressure in gas dehydration systems
There are several processes and principles for obtaining high triethylene glycol (TEG) purity in gas dehydration process. All methods are based on the principle of reducing the effective partial pressure of water in the vapour space of the glycol reboiler, and hence obtaining a higher glycol concentration at the same temperature. One of the most common methods for enhancement of the glycol ...
-
European Oil and Gas from Exploration to End User
Made up of a team of senior specialists dedicated to innovation and dependability in the field of combustion technology; CS Combustion Solutions' (CS) staff use their 25 years of expertise in engineering, supplying and commissioning of vertical and horizontal combustors for a wide range of applications to find the best results for each individual requirement. "We are a company that specialises in ...
-
Energy and exergy analyses of a sulphation unit in a powder detergent plant
In this study, where the actual plant operational data were utilised, the energy and exergy analyses of a sulphation unit in a powder detergent plant with a production rate of 4400 kg /h, located in Izmir, were performed. The energy and exergy losses were determined in four components of the sulphation unit and the overall energy and exergy efficiencies were calculated as 73 and 56%, ...
-
Case study - Oxidizer energy recovery options
Overview The mainstream media today is full of allusions to energy awareness and conservation. Just as visible these days are media references to astronomical dollar figures that can boggle the mind. This article does not seek to break out of that mold, but rather to conform to it – as Oxidizer Stack Heat Recovery offers a tremendous opportunity for both energy conservation and energy ...
-
Saint-Vincent Hospital, Ottawa, Ontario, Canada
Boiler/Cogen Heat/Energy Recovery Application Thermal Energy installed designed and implemented an integrated FLU-ACE heat recovery system with cogeneration unit for efficient electrical power generation and an overall reduction in energy consumption. The installation consists of a natural gas fueled engine with a 425 kW generator, waste heat boiler, and FLU-ACE system processing combined flue ...
-
Maximising biogas in anaerobic digestion by using engine waste heat for thermal hydrolysis pre-treatment of sludge
EXECUTIVE SUMMARY Dublin's Ringsend WWTP was designed to serve a population of approximately 1.2 million pe with a sludge production of 37,000 dry tonnes per year after upgrading to full secondary treatment. Several technical solutions were put forward as part of a Design, Build, Finance and Operate (DBFO) competition, with the chosen solution being a proposal by Black and Veatch for a ...
-
Case study - Keeping ethanol production green
OVERVIEW Originally published in Pollution Engineering Magazine. In an effort to reduce the world’s dependence on fossil fuels, there has been a major push towards alternatives. Ethanol has been at the forefront of this movement because it reduces greenhouse gas emissions from automobiles and its production has a positive net energy balance. The homegrown fuel also reduces the need for ...
-
Cleaning Up Gasification Syngas
Documento sin título Introduction By definition, gasification is the art of changing a non-gaseous substance, such as a liquid or a solid, into a gas. By this definition, processes such as combustion, anaerobic digestion and pyrolysis would be classified as gasification. However, in today’s world, gasification is defined as any process, which produces a “synthesis gas” or a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you