Waste Heat To Power Equipment For Energy Management In Europe
-
Manufactured by ElectraTherm by Bitzer Groupbased in USA
This low temperature, waste heat recovery unit is ideal for heat sources above 70C. A simple and robust design along with proprietary technologies give the ElectraTherm ORC system the lowest heat requirements in its class while still achieving high efficiencies through inconsistencies in the heat source. This makes ElectraTherm's systems ideal for small-scale applications or those with varying ...
-
Manufactured by Solex Thermal Sciencebased in CANADA
Unlike conventional drying and conditioning technologies which blow hot air through the product as both the heat source and the way of removing moisture; Solex uses a combination of advanced plate heat exchange technology to provide the heat source and independent sweep air to remove the moisture. This approach greatly reduces air-flow requirements, returning much better efficiencies and improved ...
-
Manufactured by Burmeister & Wain Scandinavian Contractor A/S (BWSC)based in DENMARK
Based on our extensive experience and industry network, BWSC offers a broad range of up-grade, lifetime extension and rehabilitation measures on part or full turnkey basis, such ...
-
Manufactured by Spilling Energie Systeme GmbHbased in GERMANY
From the single-stage, overhung turbine to the efficiency-optimised multi-stage, tandem type turbo set – Spilling steam turbines are suited to the most varied customer requirements and applications. The wide-ranging product line is geared to the decentral generation of energy and enables a wide range of applications in driving power ranges between 300 to 5,000 kW. At the focus are ...
-
Manufactured by Dutch Incinerators BVbased in NETHERLANDS
Electrical power generation by an Organic Rankine Cycle (ORC). An ORC converts recovered waste heat to combined heat and power (CHP), where steam based energy recovery is not practically feasible, specifically for energy recovery at lower flue gas temperatures and smaller thermal input capacities. Power generation by a steam turbine, specifically for energy recovery at higher flue gas ...
-
Manufactured by INTEC GMK GmbHbased in GERMANY
INDUCAL-„industrial caloric" describes our organic rankine cycle-waste heat recovery product line that makes it possible to recover waste heat efficiently from industrial plants, such as glass and steel mills or big engines for the generation of electricity. The primarily named waste heat sources nowadays are mainly not recovered since most of the time they are only available on low ...
-
based in UNITED KINGDOM
Worldwide there is an estimated 40,000GWhe of energy lost from steam systems. The Heliex Steam expander provides a method to recover some of these ...
-
by EcoGenR8 Ltdbased in UNITED KINGDOM
Our waste heat solution will convert even low grade heat – whether liquid, steam or gas – into green ...
-
Manufactured by Zudek s.r.l.based in ITALY
Albert Einstein presented in 1930 for the first time a no-moving-parts absorption refrigerator that required only a heat source to operate. More than sixty years later, we at Zudek embraced and developed this refrigeration system, using a water and ammonia solution (ammonium hydrate), making it one of our strengths. Enermatik is an ammonia absorption chiller that generates refrigeration power ...
-
Manufactured by Zuccato Energia Srlbased in ITALY
LT-Series Modules: The versatile, reliable and safe Low-Temperature for Primary Power Generation and Waste Heat Recovery by Zuccato Energia. Designed using cutting edge-technologies, the LT-Series ORC power generation modules by Zuccato Energia are a compact and efficient solution for small-scale primary power generation. Available with electric power outputs ranging from 75 to 561 kWE, they ...
-
Manufactured by Dürr Systems AG - Clean Technology Systemsbased in GERMANY
ORC stands for “Organic Rankine Cycle” – a procedure that uses waste heat to produce electricity with the aid of an evaporation ...
-
Manufactured by Svenska Rotor Maskiner, SRMbased in SWEDEN
In the next few decades, renewable energy production, and efficient and smart energy use, will increasingly dominate the energy systems around the world. This means that we are entering a time characterized by transformation. And the use of energy will be seen as a strategic question, not just a cost for ...
-
Manufactured by Ashwell Biomass Ltdbased in UNITED KINGDOM
Produce Electricity & Generate Heat with a Biomass Boiler CHP solution. Ashwell Biomass along with leading Organic Rankine Cycle (ORC) specialists Enogia to offer low maintenance, cost effective and proven biomass Combined Heat and Power (CHP) solutions. Already got a biomass boiler but want to explore CHP? A key benefit of the Ashwell/Enogia solution is that it is compatible with most ...
-
Manufactured by Clarke Energybased in UNITED KINGDOM
In those areas not serviced by a main electricity grid, locally generated electricity is ideally suited as a cost-effective way of meeting the local electricity demand while reducing significant network installation or upgrade costs. Through supply of energy directly at the load with a captive power plant, it is also possible to reduce or avoid altogether the transport and distribution losses. ...
-
Manufactured by Schmid Energy Solutionsbased in SWITZERLAND
With the “HLT-100 compact” hot air turbine, electricity can be generated with a wood firing system from a thermal offtake of 300 kW. Due to their complexity and maintenance requirements, other systems – such as ORC systems or steam turbines – only become worthwhile as large-scale systems with a thermal capacity above 2 MW. In many cases, heat offtake all year round cannot ...
-
based in GERMANY
Whether you want to process organic waste or energy crops, structure-rich or liquid feedstocks, household waste or commercial wastes - GAET offers in each case the optimum biogas technology in conjunction with an adapted feedstock pre-treatment. Products of the fermentation process are, on the one hand, energy in the desired form as either biomethane or electrical energy and heat realized by ...
-
Manufactured by CCm Technologies Ltdbased in UNITED KINGDOM
CCm Technologies has developed a heat engine that uses CO2 as the working fluid. The patented technology uses a unique thermodynamic cycle that turns waste heat into useable electrical energy. This innovation saves vast amounts of carbon emissions and increases the viability of processes that produce waste ...
-
Manufactured by Hydrogenious LOHC Technologies GmbHbased in GERMANY
Stationary LOHC infrastructure – supplying the hydrogen offtakers right where they are, Our ReleasePLANTS are designed to release hydrogen from the LOHC oil. Our ReleasePLANTS are ideal for medium to large-scale hydrogen demand in industry, supplying hydrogen terminals and hubs as well as for pipeline injection. The plants are designed for continuous large-scale hydrogen release. Plants can ...
-
based in SWEDEN
The Stirling engine, which is what is referred to as a gas pressure engine, was invented in the early 19th century. From an historical perspective, its practical applications has been limited, compared to the internal combustion engine, with the result that the technology has never had a major commercial breakthrough. Combined with an overall societal push to reduce the use of fossil fuels, the ...
-
Manufactured by heat 11 GmbH & Co. KGbased in GERMANY
Thermal oil waste heat boilers are heated by means of flue gases, e.g. from a biomass combustion. With the thermal energy obtained in the waste heat boiler ORC plants can be operated to produce electrical power. The waste heat of the ORC process can be used for additional processes such as wood drying or hot water ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you