Energy Monitoring Applications available in Cuba
-
Premium
International testing for biofuels
Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges. ...
By Metrohm AG based in Herisau, SWITZERLAND.
-
Premium
Electronic fuel control valves solutions for power generation industry
Power generation is one of the most important markets in any modern economy. The power generation industry involves both producing power and distributing it efficiently throughout its network. The relentless pursuit of technology innovations has existed from day one and CCC has always been a leader with the introduction of digital electronic controls. We continue to invest in R&D to maintain the most advanced line of fuel products to meet the toughest emissions around the ...
By Continental Controls Corporation (CCC) based in San Diego, CALIFORNIA (USA).
-
Premium
Electronic fuel control valves solutions for renewables industry
The growing awareness and use of biomass and hydrogen as renewable energy sources is critical to future energy growth. CCC technology has been used for years to enable stable engine operation using biogas that can vary greatly in quality. The advanced designs of the CCC embedded fuel valve controls allows seamless operation with all forms of renewable gas, including blended fuel ...
By Continental Controls Corporation (CCC) based in San Diego, CALIFORNIA (USA).
-
Premium
Machine condition monitoring for biofuels
Overview The use of ethanol as a gasoline additive has increased dramatically over the past few years and will likely continue to increase. For fuel blenders, this means an added challenge to avoid an incorrect blend that could lead to regulatory fines, loss of customer confidence and damage to equipment. A quick on-site analysis with a portable mid-infrared based analyzer, such as the InfraCal 2 Ethanol Blend Analyzer shown in the photo, can help fuel blenders quickly flag out-of-spec product and ensure the ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Industrial Boilers Application Note
Industrial boilers are used to produce steam, whicl can be used to turn electrical turbines to generate power or provide heat in an industrial process. In all cases, it is important to monitor and diagnose combustion conditions within the boiler to improve its operation, and safety. Key measurements can support the optimisation of the combustion process and minimise emissions. Monitoring the boiler can also provide important information on the refractory or waterwall condition. AMETEK Land's products support ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Gas monitoring for power generation applications
Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’ ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Machine condition monitoring for off-highway heavy equipment
Overview Machine Condition Monitoring based on oil analysis has become an important, if not mandatory, maintenance practice for the construction, mining, and agricultural industries. Equipment in these industries are frequently exposed to severe environmental and working conditions. An effective oil analysis program will keep important assets in operation by reducing unexpected failures and costly unscheduled ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Agriculture Biogas Plant Modeling
By inCTRL Solutions Inc. - a subsidiary of SKion Water based in Toronto, ONTARIO (CANADA).
-
Premium
Compressed air and industrial gases solutions for more markets sector
More markets for VPInstruments solutions. VPInstruments offers industrial customers easy insight into energy flows. We believe that industrial energy monitoring should be easy and effortless to enable insight, savings, and optimisation. VPInstruments products are recommended by leading energy professionals worldwide and offer the most complete measurement solution for compressed air flow, gas flow, vacuum and electric energy consumption. Our monitoring software VPVision can be used for all utilities including air, ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Machine condition monitoring for trucking fleet
Overview Over-the-road trucking fleets depend on their vehicles for their business and revenue. Vehicle availability is critical and unexpected breakdowns can be costly – not only due to the cost of the repair but towing charges of a large truck and the lost revenue can add up to an expensive ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Determination of aromatic hydrocarbons in electrical insulating oils
Introduction One of the most widespread liquid electrical insulating materials is transformer oil. It is used to fill the pores in the fiber insulation and the space between the windings, thereby increasing the dielectric strength of the insulation and improving the heat removal from the windings and the core of a ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Machine condition monitoring for racing
Grand Prix racing utilizes cutting-edge high performance engines operation at extreme RPMs and temperatures. To keep the very valuable engines operational and competitive requires a team of mechanics paying careful attention to the engine and lubricant condition. To support this, engine condition monitoring based on oil analysis has become a widely practiced technique by Formula One racing teams. Not only do the racing teams themselves take Spectro Scientific instruments to races, but the companies that design, ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Machine condition monitoring for power generation
Power plants are expected to operate 24 hours per day, 7 days per week. Downtime and equipment derating (when a generator fails to deliver power at its rated capacity) can cost a power plant thousands of dollars per hour. The cost of replacing failed equipment is also extremely high. Vibration analysis by itself is not enough to anticipate catastrophic failures. Oil analysis is often able to detect problems at a much earlier stage than vibration analysis. This is why more and more power plants are bringing oil ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Electronic fuel control valves solutions for oil and gas industry
Continental Controls provides services and products for the midstream and upstream oil and gas markets. CCC products can be on anything from a small GM engine burning field gas at a wellhead in New Mexico, to a GE LM-2500 gas turbine, pumping gas from offshore platforms to Pemex gas pipelines in southern ...
By Continental Controls Corporation (CCC) based in San Diego, CALIFORNIA (USA).
-
Premium
Machine condition monitoring for pulp & paper
Machine condition monitoring based on oil analysis has become an important, if not mandatory, maintenance practice for pulp and paper companies. An effective oil analysis program will keep important manufacturing assets such as pumps, gears, bearings, compressors, engines, hydraulic systems and other oil-wetted machinery in operation by reducing unexpected failures and costly unscheduled downtime. For pulp and paper companies the drying roll is at the heart of production and downtime can cost many thousands of ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Machine condition monitoring for power gen & industrial
Machine condition monitoring using oil analysis is a predictive maintenance solution for industrial environments. An oil analysis program allows for reduction in unexpected failures and costly downtime for manufacturing components such as gears, pumps, compressors, engines, bearings, hydraulic systems, and other ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Energy Savings Solutions for Food Packaging Industry
A Dutch tomato and vegetable packaging company used VPVision with an integrated industrial VPRouter to analyze and enhance their compressed air usage. Together with 6 pieces of VPFlowScope M flow meters, and 3 items of 3 Phase Power Meter, the company gains a clear view from the supply to the demand ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Machine condition monitoring for military & aerospace
Overview Machine condition monitoring based on oil analysis has become an essential maintenance practice of military organizations throughout the world. An effective oil analysis program will keep important military assets such as planes, ships, tanks, trucks, and any other oil-wetted machinery in operation by reducing unexpected failures and costly unscheduled downtime. Mission readiness of military equipment is paramount, and proper maintenance can also decrease the long-term expense by minimizing replacement ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Temperature and gas sensing solutions products for solar photovoltaics
Utilize innovative power system technology that can increase productivity and reduce costs. To compete in today’s energy market, photovoltaic (PV) fabrication enterprises require solar PV manufacturing equipment that increases productivity and reduces costs. Advanced Energy is a major supplier of power systems for solar PV manufacturing. We offer economic and quality advantages via innovative power system technology. We’re dedicated to your mission of deploying sustainable energy production around the ...
By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA).
-
Premium
Machine condition monitoring for industrial manufacturing
Machine condition monitoring using oil analysis is a predictive maintenance solution for industrial environments. An oil analysis program allows for reduction in unexpected failures and costly downtime for manufacturing components such as gears, pumps, compressors, engines, bearings, hydraulic systems, and other ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you