Energy Monitoring Applications available in Tanzania
-
Premium
Machine condition monitoring for racing
Grand Prix racing utilizes cutting-edge high performance engines operation at extreme RPMs and temperatures. To keep the very valuable engines operational and competitive requires a team of mechanics paying careful attention to the engine and lubricant condition. To support this, engine condition monitoring based on oil analysis has become a widely practiced technique by Formula One racing teams. Not only do the racing teams themselves take Spectro Scientific instruments to races, but the companies that design, ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Machine condition monitoring for off-highway heavy equipment
Overview Machine Condition Monitoring based on oil analysis has become an important, if not mandatory, maintenance practice for the construction, mining, and agricultural industries. Equipment in these industries are frequently exposed to severe environmental and working conditions. An effective oil analysis program will keep important assets in operation by reducing unexpected failures and costly unscheduled ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Maintenance-Free Wind Speed Lidar
The remote sensing Lidars are accepted more than ever for wind measurements in onshore and offshore farms. The maintenance-free wind speed lidar offers many advantages over using met masts alone. The advances in remote sensing technology have made wind speed lidar more reliable and accurate. The compact lidars are also mobile, relatively small and adaptable to be installed on different platforms and environments. ...
By Qingdao Leice Transient Technology Co., Ltd. based in Qingdao, CHINA.
-
Premium
Electronic fuel control valves solutions for power generation industry
Power generation is one of the most important markets in any modern economy. The power generation industry involves both producing power and distributing it efficiently throughout its network. The relentless pursuit of technology innovations has existed from day one and CCC has always been a leader with the introduction of digital electronic controls. We continue to invest in R&D to maintain the most advanced line of fuel products to meet the toughest emissions around the ...
By Continental Controls Corporation (CCC) based in San Diego, CALIFORNIA (USA).
-
Premium
Determination of aromatic hydrocarbons in electrical insulating oils
Introduction One of the most widespread liquid electrical insulating materials is transformer oil. It is used to fill the pores in the fiber insulation and the space between the windings, thereby increasing the dielectric strength of the insulation and improving the heat removal from the windings and the core of a ...
By Lumex Instruments based in Mission, BRITISH COLUMBIA (CANADA).
-
Premium
Machine condition monitoring for engine testing and development
Engine manufacturers use Spectro Scientific oil analysis instruments to assist in engine testing during new product development, testing engines during manufacturing run-in, and for qualifying new lubricants. Engines include: Gasoline and diesel automobile engines. Truck and other high speed diesel engines. Medium speed diesel engines such as those used for locomotives, marine and power generation. Extremely large low speed diesel engines for marine propulsion and power generation. Motorcycle engines. High ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Asphalt production - monitoring solutions for process optimization & energy saving
Asphalt plants deal with a harsh environment and are subject to great mechanical and thermal constraints. Process monitoring and optimization is becoming an increasingly important issue for plants, especially in terms of energy savings. ...
By ENVEA based in Poissy, FRANCE.
-
Premium
Machine condition monitoring for municipalities
Overview Cities and towns are often responsible for maintaining critical assets such as water and wastewater treatment facilities and power generation plants. Oil analysis on this critical equipment as part of a robust maintenance program is a very cost effective way of failure avoidance. Additionally, greater emphasis on environmental conservation and a focus on delivering critical services while operating under reduced budgets leads municipalities to activate these programs. Spectro oil analysis solutions are ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Visual inspection solutions for power generation industry
Medit provides non-destructive inspection products and solutions including video borescopes, fiberscopes and pipe cameras for key power generation applications, including those for fossil fuels, nuclear energy, and renewable energy transmission and distribution. Our reliable, advanced inspection solutions, and support, enable power generation customers to maximize efficiency, minimize downtime and enhance productivity with unyielding ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Machine condition monitoring for power gen & industrial
Machine condition monitoring using oil analysis is a predictive maintenance solution for industrial environments. An oil analysis program allows for reduction in unexpected failures and costly downtime for manufacturing components such as gears, pumps, compressors, engines, bearings, hydraulic systems, and other ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Compressed air and industrial gases solutions for more markets sector
More markets for VPInstruments solutions. VPInstruments offers industrial customers easy insight into energy flows. We believe that industrial energy monitoring should be easy and effortless to enable insight, savings, and optimisation. VPInstruments products are recommended by leading energy professionals worldwide and offer the most complete measurement solution for compressed air flow, gas flow, vacuum and electric energy consumption. Our monitoring software VPVision can be used for all utilities including air, ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Applications in Onshore and Offshore Wind Energy
Accurate Wind Resource Assessment. Power Performance Verification. Bankable Data to Reduce Fund Risk. Power Curve Assessment and Prediction. Turbine Efficiency Evaluation. Turbine Wake Detection. Wind Farm Control and Optimization. Wind ...
By Qingdao Leice Transient Technology Co., Ltd. based in Qingdao, CHINA.
-
Premium
Electronic fuel control valves solutions for oil and gas industry
Continental Controls provides services and products for the midstream and upstream oil and gas markets. CCC products can be on anything from a small GM engine burning field gas at a wellhead in New Mexico, to a GE LM-2500 gas turbine, pumping gas from offshore platforms to Pemex gas pipelines in southern ...
By Continental Controls Corporation (CCC) based in San Diego, CALIFORNIA (USA).
-
Premium
International testing for biofuels
Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges. ...
By Metrohm AG based in Herisau, SWITZERLAND.
-
Premium
Industrial Boilers Application Note
Industrial boilers are used to produce steam, whicl can be used to turn electrical turbines to generate power or provide heat in an industrial process. In all cases, it is important to monitor and diagnose combustion conditions within the boiler to improve its operation, and safety. Key measurements can support the optimisation of the combustion process and minimise emissions. Monitoring the boiler can also provide important information on the refractory or waterwall condition. AMETEK Land's products support ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Temperature and gas sensing solutions products for solar photovoltaics
Utilize innovative power system technology that can increase productivity and reduce costs. To compete in today’s energy market, photovoltaic (PV) fabrication enterprises require solar PV manufacturing equipment that increases productivity and reduces costs. Advanced Energy is a major supplier of power systems for solar PV manufacturing. We offer economic and quality advantages via innovative power system technology. We’re dedicated to your mission of deploying sustainable energy production around the ...
By Advanced Energy Industries, Inc. based in Denver, COLORADO (USA).
-
Premium
Energy Savings Solutions for Food Packaging Industry
A Dutch tomato and vegetable packaging company used VPVision with an integrated industrial VPRouter to analyze and enhance their compressed air usage. Together with 6 pieces of VPFlowScope M flow meters, and 3 items of 3 Phase Power Meter, the company gains a clear view from the supply to the demand ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Machine condition monitoring for trucking fleet
Overview Over-the-road trucking fleets depend on their vehicles for their business and revenue. Vehicle availability is critical and unexpected breakdowns can be costly – not only due to the cost of the repair but towing charges of a large truck and the lost revenue can add up to an expensive ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Electronic fuel control valves solutions for renewables industry
The growing awareness and use of biomass and hydrogen as renewable energy sources is critical to future energy growth. CCC technology has been used for years to enable stable engine operation using biogas that can vary greatly in quality. The advanced designs of the CCC embedded fuel valve controls allows seamless operation with all forms of renewable gas, including blended fuel ...
By Continental Controls Corporation (CCC) based in San Diego, CALIFORNIA (USA).
-
Premium
Machine condition monitoring for industrial manufacturing
Machine condition monitoring using oil analysis is a predictive maintenance solution for industrial environments. An oil analysis program allows for reduction in unexpected failures and costly downtime for manufacturing components such as gears, pumps, compressors, engines, bearings, hydraulic systems, and other ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you