Energy Monitoring Applications available in Rhode Island
-
Premium
Electronic fuel control valves solutions for power generation industry
Power generation is one of the most important markets in any modern economy. The power generation industry involves both producing power and distributing it efficiently throughout its network. The relentless pursuit of technology innovations has existed from day one and CCC has always been a leader with the introduction of digital electronic controls. We continue to invest in R&D to maintain the most advanced line of fuel products to meet the toughest emissions around the ...
By Continental Controls Corporation (CCC) based in San Diego, CALIFORNIA (USA).
-
Premium
Machine condition monitoring for aviation, aerospace & airlines
Overview Oil analysis has long been practiced for aircraft engines and other airborne oil-wetted systems such as hydraulic systems and gear boxes in helicopters. Military organizations are perhaps the number one users of oil analysis testing and commercial aviation also has a long history of oil analysis. A number of airlines throughout the world do their own oil analysis, but in many cases they send samples to commercial oil laboratories. Engine manufacturers also do oil analysis as part of engine development ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Lithium-Ion Battery Safety
In our lithium-ion-powered world, battery safety is crucial. Gas analyzers, like the GT6000 Mobilis, support research work preventing disasters caused by thermal runaway reactions. They measure gases such as carbon monoxide, hydrogen fluoride, and VOCs for accurate identification. The GT5000 Terra ensures safety for first responders and EV passengers by measuring gases at the exposure point. Type approval regulations like ECE-R100 and FTIR technology in GT5000 Terra align with safety mandates. ...
By Gasmet Technologies - a Nederman company based in Vantaa, FINLAND.
-
Premium
Applications in Onshore and Offshore Wind Energy
Accurate Wind Resource Assessment. Power Performance Verification. Bankable Data to Reduce Fund Risk. Power Curve Assessment and Prediction. Turbine Efficiency Evaluation. Turbine Wake Detection. Wind Farm Control and Optimization. Wind ...
By Qingdao Leice Transient Technology Co., Ltd. based in Qingdao, CHINA.
-
Premium
Industrial Boilers Application Note
Industrial boilers are used to produce steam, whicl can be used to turn electrical turbines to generate power or provide heat in an industrial process. In all cases, it is important to monitor and diagnose combustion conditions within the boiler to improve its operation, and safety. Key measurements can support the optimisation of the combustion process and minimise emissions. Monitoring the boiler can also provide important information on the refractory or waterwall condition. AMETEK Land's products support ...
By AMETEK Land Instruments International Ltd based in Dronfield, UNITED KINGDOM.
-
Premium
Machine condition monitoring for industrial manufacturing
Machine condition monitoring using oil analysis is a predictive maintenance solution for industrial environments. An oil analysis program allows for reduction in unexpected failures and costly downtime for manufacturing components such as gears, pumps, compressors, engines, bearings, hydraulic systems, and other ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Energy Savings Solutions for Food Packaging Industry
A Dutch tomato and vegetable packaging company used VPVision with an integrated industrial VPRouter to analyze and enhance their compressed air usage. Together with 6 pieces of VPFlowScope M flow meters, and 3 items of 3 Phase Power Meter, the company gains a clear view from the supply to the demand ...
By VPInstruments based in Delft, NETHERLANDS.
-
Premium
Electronic fuel control valves solutions for oil and gas industry
Continental Controls provides services and products for the midstream and upstream oil and gas markets. CCC products can be on anything from a small GM engine burning field gas at a wellhead in New Mexico, to a GE LM-2500 gas turbine, pumping gas from offshore platforms to Pemex gas pipelines in southern ...
By Continental Controls Corporation (CCC) based in San Diego, CALIFORNIA (USA).
-
Premium
Machine condition monitoring for off-highway heavy equipment
Overview Machine Condition Monitoring based on oil analysis has become an important, if not mandatory, maintenance practice for the construction, mining, and agricultural industries. Equipment in these industries are frequently exposed to severe environmental and working conditions. An effective oil analysis program will keep important assets in operation by reducing unexpected failures and costly unscheduled ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Machine condition monitoring for racing
Grand Prix racing utilizes cutting-edge high performance engines operation at extreme RPMs and temperatures. To keep the very valuable engines operational and competitive requires a team of mechanics paying careful attention to the engine and lubricant condition. To support this, engine condition monitoring based on oil analysis has become a widely practiced technique by Formula One racing teams. Not only do the racing teams themselves take Spectro Scientific instruments to races, but the companies that design, ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Machine condition monitoring for trucking fleet
Overview Over-the-road trucking fleets depend on their vehicles for their business and revenue. Vehicle availability is critical and unexpected breakdowns can be costly – not only due to the cost of the repair but towing charges of a large truck and the lost revenue can add up to an expensive ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Machine condition monitoring for municipalities
Overview Cities and towns are often responsible for maintaining critical assets such as water and wastewater treatment facilities and power generation plants. Oil analysis on this critical equipment as part of a robust maintenance program is a very cost effective way of failure avoidance. Additionally, greater emphasis on environmental conservation and a focus on delivering critical services while operating under reduced budgets leads municipalities to activate these programs. Spectro oil analysis solutions are ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Waste incineration line continuous monitoring solutions
In accordance with "Standard for pollution control on the municipal solid waste incineration" (draft), all existing and new the municipal solid waste incinerators need automatic continuous on-line monitoring of main ingredients in incineration flue gas. Monitoring projects should include at least HCl, SO2, NOx, soot, etc., but also need to detect CO and HF in some higher environmental requirements ...
By Hangzhou Zetian Technology based in Hangzhou, CHINA.
-
Premium
Machine condition monitoring for military & aerospace
Overview Machine condition monitoring based on oil analysis has become an essential maintenance practice of military organizations throughout the world. An effective oil analysis program will keep important military assets such as planes, ships, tanks, trucks, and any other oil-wetted machinery in operation by reducing unexpected failures and costly unscheduled downtime. Mission readiness of military equipment is paramount, and proper maintenance can also decrease the long-term expense by minimizing replacement ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Machine condition monitoring for engine testing and development
Engine manufacturers use Spectro Scientific oil analysis instruments to assist in engine testing during new product development, testing engines during manufacturing run-in, and for qualifying new lubricants. Engines include: Gasoline and diesel automobile engines. Truck and other high speed diesel engines. Medium speed diesel engines such as those used for locomotives, marine and power generation. Extremely large low speed diesel engines for marine propulsion and power generation. Motorcycle engines. High ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Machine condition monitoring for food and beverage
Manufacturers of food and beverages typically have a high volume of product passing through their facilities at all times. For this reason, any unexpected downtime can be very costly in terms of lost production. In addition, many food and beverage facilities have difficult challenges associated with lubricant contamination. Many of these facilities have a lot of water or steam being used to clean and sterilize products and packaging. Water can get into the lubrication oil and become a very troublesome contaminant. ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Visual inspection solutions for power generation industry
Medit provides non-destructive inspection products and solutions including video borescopes, fiberscopes and pipe cameras for key power generation applications, including those for fossil fuels, nuclear energy, and renewable energy transmission and distribution. Our reliable, advanced inspection solutions, and support, enable power generation customers to maximize efficiency, minimize downtime and enhance productivity with unyielding ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Borescope for Power Generation and Turbine Components Inspection
Turbines and generators are essential pieces of machinery that need to be adequately maintained and repaired to ensure maximum service life and safety. Non-destructive remote visual inspection with a video borescope is a cost-effective and efficient way to inspect without having to disassemble a turbine. Steam and gas turbines run at extremely high pressures, and they need to be kept in good mechanical shape to do their jobs ...
By Fiberscope.net by Medit Inc. based in Winnipeg, MANITOBA (CANADA).
-
Premium
Machine condition monitoring for biofuels
Overview The use of ethanol as a gasoline additive has increased dramatically over the past few years and will likely continue to increase. For fuel blenders, this means an added challenge to avoid an incorrect blend that could lead to regulatory fines, loss of customer confidence and damage to equipment. A quick on-site analysis with a portable mid-infrared based analyzer, such as the InfraCal 2 Ethanol Blend Analyzer shown in the photo, can help fuel blenders quickly flag out-of-spec product and ensure the ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
-
Premium
Machine condition monitoring for pulp & paper
Machine condition monitoring based on oil analysis has become an important, if not mandatory, maintenance practice for pulp and paper companies. An effective oil analysis program will keep important manufacturing assets such as pumps, gears, bearings, compressors, engines, hydraulic systems and other oil-wetted machinery in operation by reducing unexpected failures and costly unscheduled downtime. For pulp and paper companies the drying roll is at the heart of production and downtime can cost many thousands of ...
By AMETEK Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you