Energy Monitoring Applications in Australasia

  • Premium

    Industrial energy and heat recovery solutions

    Rising fuel and electric costs, along with global warming concerns have changed the way industrial facilities view energy consumption. Process equipment and air pollution control systems that were installed several years ago may not reflect the energy conscious designs available today, analyzing these systems to determine energy reduction opportunities can be a very valuable practice. Recovering waste heat is one of the easiest and most utilized means of reducing energy demands at industrial facilities.

    By Anguil Environmental Systems, Inc. Office in Wollongong, AUSTRALIA.

  • Premium

    Portable and fixed gas analysers for biogas upgrading

    Biogas with 60% CH4 can be upgraded using various techniques. Upgraded biogas may be packaged for transport use, injected into a distribution network or piped off site.

    By QED Environmental Systems Ltd. Distributor in Scoresby, AUSTRALIA.

  • Premium

    Laboratory and industrial ovens and furnaces solutions for electronics industry

    Within the electronics industry manufacturers of ICs (integrated circuits), PCB and semiconductor devices use Carbolite bench top and floor standing ovens for a number of tests to prove their components. The Carbolite Peak series (PN Natural Convection Oven & PF Fan Convection Oven) as well as the GP General Purpose ranges of ovens are used at elevated temperatures over an extended period for burn-in and stress testing of components to detect faults. Carbolite ovens can accommodate both rack and shelf...

    By Carbolite Gero Ltd - part of Verder Scientific Distributor in Noble Park North, AUSTRALIA.

  • Premium

    Measurement of methane, methanol and ethanol for the biomass monitoring for biofuels.

    The Series 8900 provides direct measurement of methane, methanol, and ethanol for the biofuel industry. The Series 8900 GC employs a flame ionization detector (FID). The methane, methanol, and ethanol in the gas sample are physically separated using proprietary GC columns. A dual-column configuration with timed backflush to vent is used to strip off moisture and heavier gases. At sample injection, a fixed volume of sample is carried through the pre-cut column. The backflush is timed so that primarily the MME and...

    By AMETEK MOCON - Baseline Distributor in AUSTRALIA.

  • Premium

    International testing for biofuels

    Sustainable use of biofuels requires reliable and precise analytical methods throughout – from the choice of raw materials through to process optimization and on to the compliant final product. As a leading manufacturer of instruments for chemical analysis, we are quite aware of these challenges.

    By Metrohm AG Distributor in AUSTRALIA.

  • Premium

    Laboratory instruments solutions for petrochemical and biofuel

    Crude oil is a highly complex mixture of hydrocarbons. Through desalting, distillation, and conversion, it is transformed into fractions of higher-quality hydrocarbons such as paraffins, aromatics, naphthenes, and olefins. Different ratios of these so-called PIANO compounds are blended to yield different fuel and lubricant types. Increasingly, fossil fuels are blended with biofuels. Both blending and refining processes are demanding and require precise and reliable analysis. Regardless whether you deal with...

    By Metrohm AG Distributor in AUSTRALIA.

  • Premium

    Laboratory and industrial ovens and furnaces solutions for coal & coke test equipment

    The range of coal and coke tests carried out in a furnace or oven has grown over many years, and Carbolite Gero has responded to the requirements of each new standard by designing a furnace to suit the specific requirements of each test method. As a result, Carbolite Gero products are frequently specified as the reference equipment used in coal laboratories, inspection companies, power plants and steelworks throughout the world. The range includes international coal and coke testing and iron ore evaluation test...

    By Carbolite Gero Ltd - part of Verder Scientific Distributor in Noble Park North, AUSTRALIA.

  • Premium

    VOC abatement equipments for power generation & distribution

    Create more efficient power production.

    By Munters Office in Brisbane, AUSTRALIA.

  • Premium

    Gas monitoring for power generation applications

    Thermal power generation involves the combustion of a fuel to raise steam and drive a turbine to produce electricity. AMETEK Land provides the high-performance temperature measurements, emissions monitoring and safety systems demanded by this industry. High-accuracy measurements of temperature and flue gas composition are essential in optimising the combustion process, regardless of fuel used. Our instruments also help control pollution, and provide essential safety monitoring. With more than 60 years’...

    By AMETEK Land Distributor in AUSTRALIA.

  • Premium

    Machine condition monitoring for biofuels

    Overview The use of ethanol as a gasoline additive has increased dramatically over the past few years and will likely continue to increase. For fuel blenders, this means an added challenge to avoid an incorrect blend that could lead to regulatory fines, loss of customer confidence and damage to equipment. A quick on-site analysis with a portable mid-infrared based analyzer, such as the InfraCal 2 Ethanol Blend Analyzer shown in the photo, can help fuel blenders quickly flag out-of-spec product and ensure the...

    By Spectro Scientific Distributor in Tuggerah, AUSTRALIA.

  • Premium

    Meteorological sensors for wind turbine control

    Higher, more robust, more reliable: Parallel to the growing requirements for wind turbines, the requirements for monitoring sensors grow as well. But how can wind sensor manufacturers fulfil these wishes? The ideal sensor has both a high degree of precision and a long, maintenance-free useful life under the most extreme of conditions. While mechanical anemometers were initially used in turbines, most producers around the world have since switched to ultrasonic anemometers without moving parts as part of their...

    By OTT HydroMet Distributor in AUSTRALIA.

  • Premium

    Meteorological sensors for solar monitoring industry

    The most important measurement parameter is irradiation. Since PV systems are becoming ever larger, the accuracy of the irradiation measurement is increasingly important for the efficiency of the system. Wind cools the temperature of the module and must therefore be included in the efficiency calculation. Precipitation leads to contamination or covering (snow). With increasing temperature, the performance of the solar module decreases. Therefore, it is important to measure the temperature of the solar module in...

    By OTT HydroMet Distributor in AUSTRALIA.

  • Premium

    Measuring the Biofuel Blend Ratio in Gasoline and Diesel Fuels

    As more mandates for a minimum of ethanol in gasoline and biodiesel in diesel come into effect, major oil companies are blending higher percentages of biofuels at their terminals. A quick analytical measurement method to assess the blend ratio can be a valuable asset for fuel distributors, engine manufacturers, fleet operators, and regulatory agencies. The InfraCal Biodiesel and Ethanol Blend Analyzers offer a quick way to verify that fuel blends are on spec. They are ideal for use for non-technical personnel and...

    By Spectro Scientific Distributor in Tuggerah, AUSTRALIA.

  • Radionuclide Monitoring for Nuclear Power Plants

    The continuing establishment of nuclear power stations around the world pose unique environmental challenges for their operators. Ecotech provides air samplers to nuclear power plants for sampling of radionuclides. A nuclear power plant`s radionuclide monitoring network enables continuous sampling of airborne particles onto sample filters contained within High Volume Air Samplers. These filters are then analysed in a laboratory in order to screen for any radiation releases. The challenge has always been to...

    By Ecotech - ACOEM Group based in Knoxfield, AUSTRALIA.

  • Flow & energy management solutions for HVAC & facility

    Measurement of cold and hot water flows / BTU energy in residential buildings as well as large building complexes such as hospitals, schools, factories and offices to monitor and control usage.

    By Spire Metering Technology, LLC. Distributor in Boronia, AUSTRALIA.

  • Flow & energy management solutions for building automation industry

    For comprehensive energy efficiency monitoring for both hot water systems and chilled water systems. Reduce energy bills by monitoring the usage. Conserve energy and go green.

    By Spire Metering Technology, LLC. Distributor in Boronia, AUSTRALIA.

  • Flow & energy management solutions for vehicle and vessel sector

    Several Spire Metering Technology flowmeters are excellent for measuring engine fuel consumption and monitoring engine efficiency within Vehicle and Vessel Operation.

    By Spire Metering Technology, LLC. Distributor in Boronia, AUSTRALIA.

  • Solar Lighting Technology for Power your Ideas

    The company now has representation in all states and consists of a strong and proactive management structure coupled with a skilled team of technical professionals who have expertise in both solar power energy and LED illumination systems. Leadsun is one of only few companies worldwide that fully develops and manufactures the complete solar powered system ensuring total control over product development, quality & testing. We are leading the way with solar-powered technology and the company has patents for its...

    By Leadsun Australia based in Dandenong South, AUSTRALIA.

  • Flow measurement instrumentation for geothermal flow solutions

    The "dirty" steam produced from geothermal ground steam has always been a difficult measurement. Our unique mass vortex meters are designed for this tough application allowing steam readings in pipes up to 72" (2M).

    By Sierra Instruments, Inc. Distributor in Queensland, AUSTRALIA.

  • Measurement and control systems for the controlling the level - electronically

    Discontinuous control is used mainly in smaller steam boilers with low output since the temperature fluctuations in the boiler are fairly great as a result of irregular refilling with water. Continuous control, on the other hand, permits still more economical steam generation with high quality.

    By IGEMA GmbH Distributor in Capalaba, AUSTRALIA.

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you