Only show results in Texas? Ok

Energy Monitoring Applications

  • Thermal energy storage systems for data centers & telecommunication sector

    Data centers/telecommunication sites need to be cooled 24/7. They optimally operate at 24-28 ⁰C. They are cooled similarly to industrial air conditioning using electrical energy. Unfortunately, the system is the least energy efficient when the temperature difference is the highest (i.e. the outside temperature is too high). However, at night, when the temperature is low outside, the cooling system is more efficient or not even needed. Also in case of a blackout the cooling systems need 4-6 minutes to...

    By HeatVentors based in Mezőtúr, HUNGARY.

  • Wind Turbines for Safety & Security

    Superwind turbines have been powering seismic and tsunami detectors as well as lighthouses for well over a decade. In that time we have also powered campus security systems, pipeline sensors systems, automatic gates, and a wide assortment of the world’s audio and video camera & surveillance systems – Fire watch stations and Ski Resort Rescue shelters, for example. We even power remote public ‘safety zone’ lighting and emergency call boxes. We are also pleased that our equipment has...

    By Superwind GmbH based in Brühl, GERMANY.

  • Wind Turbines for Meteorological Support & Sensors

    The world’s weather patterns are shifting dramatically and storm and severe weather prediction is becoming more important than ever. Very often the best weather prediction sources are those with more sensors and communications assets in the most distant or obscure places – meaning mostly ‘off-grid’. On land or at sea, superwind turbines are powering meteorological sensors, weather monitoring and data transmission equipment – and doing so reliably, and despite the weather! Scientists...

    By Superwind GmbH based in Brühl, GERMANY.

  • Energy management

    With energy costs skyrocketing, companies are looking for ways to optimize energy usage and cut costs, but maintain production output. Companies now capture details of energy use, such as peak and non-peak use and type of fuel used— natural gas, steam, coal, etc. There are different programs such as Energy Star that companies are using for guidance and reporting.

    By Perillon Software Inc. based in Acton, MASSACHUSETTS (USA).

  • Ammonit Solar Resource Assessment Systems

    In order to assure well-founded decisions in designing profitable solar power plants, the solar irradiance should be measured in the assessment phase. Irradiation is a crucial parameter for site selection and plant design and economics of plant. There are many different ways and technologies to measure the irradiance phenomena that influences the power generation of a future solar power plant. Ammonit’s solutions are designed to meet the latest standards with regard to accuracy and affordability of the measurement.

    By Ammonit Measurement GmbH based in Berlin, GERMANY.

  • Measurement solution for hydrogen fuel cell testing

    As the alternatives to fossil fuels for power generation and automotive power become more widespread and preferred, so has increased the research and testing of hydrogen gas in fuel cells. The hydrogen (H2) gas used in fuel cell has to be free of impurities in order to make the fuel cell as efficient as possible and so quality thresholds have been set in legislation. Such legislation as SAE J2719 provides hydrogen fuel quality standards for proton exchange membrane (PEM) fuel cell vehicles. If impurities above...

    By Protea Limited based in Middlewich, UNITED KINGDOM.

  • Engineering services for wind energy industry

    We offer expertise in the wind industry with experience at all scales of wind energy from micro turbines to offshore systems. As active members of the industry, we are represented on RenewableUK Standards Groups, IEC technical working groups and MCS working groups, developing standards and certification requirements for the industry.

    By Energy Technology Centre Ltd based in East Kilbride, UNITED KINGDOM.

  • Laboratory instrumentation solutions for the biodiesel research

    As biodiesel is formed through a simple transesterification, it is easily monitored and characterized by NMR Spectroscopy. This analytical technique allows easy, non-destructive evaluation of many of the components regulated in biodiesel standardization (e.g., water, alcohol, phosphorous, and glycerol content). Subsequently, the NMReady could be easily incorporated into characterization to improve workflow. NMR Spectroscopy can be used to quantify the percentage of biodiesel in composite fuel mixture. Click HERE...

    By Nanalysis Corp. based in Calgary, ALBERTA (CANADA).

  • Solar Powered Home UPS

    The battery charging is done through the solar panel connected to reduce the energy used from grid power and to save the electricity bills. It increases battery life because of ripple free charging from solar panel.Complete logging and monitoring of Solar (optional) The system monitors the solar energy generated from the panels and stores the cumulative KWH generated. Monitoring through communication

    By Su-Kam Power Systems Ltd. based in Gurgaon, INDIA.

  • H2S Sensors for Biogas

    How to improve the management of H2S in biogas production. You can improve the management of H2S in the biogas production, if you can identify peaks in H2S levels in the biogas production process precisely. This will make it possible to dose H2S scrubbing chemicals such as active carbon and iron oxide very precisely and cost-efficiently. Until now it has been difficult to identify such peaks and chemicals are used in excess to reduce H2S levels.

    By SulfiLogger Sensor by Unisense based in Aarhus, DENMARK.

  • Gas detection & hazardous gas monitoring equipments for battery rooms gas detection

    As lead acid batteries are charged, minute quantities of hydrogen (H2) gas are produced. Normally, the amount of hydrogen generated during charging is not of a sufficient quantity to cause concern. There are instances however, where for various reasons, hydrogen may accumulate to create potentially hazardous gas conditions.

    By Armstrong Monitoring Corporation (AMC) based in Ottawa, ONTARIO (CANADA).

  • Datawatt Solutions for Energy Monitoring

    The Datawatt products and systems are widely used for monitoring energy networks and processes. The data from our reliable solutions are often critical information for management, process controllers, or the finance department. By monitoring data, the processes can be better managed and controlled.

    By Datawatt B.V. based in Steenwijk, NETHERLANDS.

  • Solar Powered Products for Energy Security

    At Envision Solar, we know how disruptive and even dangerous it can be to have your power go out. That’s why we make the most reliable and sustainable energy security products available today.

    By Envision Solar International, Inc. based in San Diego, CALIFORNIA (USA).

  • Gencell Solutions for Backup Power

    In its 2017 Infrastructure Report Card, the American Society of Civil Engineers assigned a “D+” to the US` aging energy infrastructure. Just a few weeks after the report was released, Los Angeles, New York and San Francisco were hit by major power outages on the same day. Mass transit was in chaos as the electrical outages caused the failure of signals and station lights. Office workers were stranded in elevators and hospital operating rooms were shut down. And businesses, factories, and homes went...

    By GenCell Ltd based in Petah Tikva, ISRAEL.

  • Clean Power for Telecom Communications

    In today’s data-driven and connected world in which mobile services outpace the grid, the power requirements to support people, businesses and devices continue to rapidly grow. In 2018, mobile operators across the globe spent $28 billion, or 16.5% of their annual OPEX, on energy. With the introduction of 5G, this financial and environmental burden is expected to double. Whether seeking alternative energy solutions for primary off-grid power or backup power for regions where grid services are poor, or where...

    By GenCell Ltd based in Petah Tikva, ISRAEL.

  • Precision moisture analysis instruments for measuring moisture and ash in biomass

    If you produce or consume biomass fuels, you know that quality is critical to your success, and you know that moisture and ash content control are critical to biomass fuel quality. Too much moisture and you get poor efficience and high emissions. Too much ash and you get fouling and slagging. And if either of those is uncontrolled, purchase contracts can fall through. Computrac can help.

    By AMETEK Brookfield based in Chandler, ARIZONA (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you