Cable Fault Location Equipment For Energy Monitoring
-
Manufactured by Atriy Electronic Appliances Trading LLCbased in UNITED ARAB EMIRATES
Cable fault indicator Lodestar PT2 is intended for detection of fault localization in overhead and cable power distribution lines of 6-35 kV.The cable fault locator can operate in networks with insulated, grounded and resistance-grounded neutral types.The fault detector is installed on control panel board of switchgear cell / wall-mounted. ...
-
Manufactured by KharkovEnergoPribor Ltd.based in UKRAINE
Reflectometer RIF-9 can be used to detect, determine the type of and distance to various inhomogeneities (couplings, branching, etc.), determine the total length (including on drums and in bundles) as well as the velocity factor of balanced and unbalanced power cables and communication lines up to 120 km long. When locating cable faults, the reflectometer RIF-9 can be used standalone for ...
-
Manufactured by NetAlly, LLCbased in USA
Network cable and link testing has never been easier with NetAlly’s LinkRunner AT. This network tester validates copper and fiber Ethernet connections in less than 10 ...
-
Manufactured by J W Fishers Manufacturing Inc.based in USA
JW Fishers CT-1 cable tracking system was specifically designed to locate and track deeply buried power and communications cables. The cable tracker will locate cables on land or underwater. The CT-1 will not only track cables, but also identify faults or break points that are exposed to water. The CT-1 system consists of a shore based Signal Injector box and the Cable Tracker Probe. The Signal ...
-
Manufactured by Applied Techno Products Pvt. Ltd.based in INDIA
According to statistics, the most common faults in the three-phase underground power cable occur such as "single-phase breakdown" (breakdown of one of the cores to the cable sheath). Breakdown of this type can be "creeping"(intermittent) (ie recovering insulation up to a certain voltage, which is lower than the operating voltage of the cable), and with the "insulation leakage" (insulation ...
-
based in USA
The CD-710 Cable Fault Detector is a portable system for easy identification of opens or shorts in exposed cable runs. ...
-
Manufactured by Eaton Corporationbased in USA
The XT IEC series includes non-reversing and reversing contactors and starters as well as overload relays and accessories. Enclosed control options include metallic and non metallic enclosures with circuit breakers, and North American or European fuses. The XT line of IEC motor control is not the same as traditional motor control designs. XT was designed to be engineered ...
-
Manufactured by Asian Contec Ltd.based in INDIA
ETL40 Van Mounted Cable Fault Locating System is the most advanced system in power cable fault detection combining the best-in-market technologies into a single fully automatic centralized setup with high reliability and multi-level safety standards. The system is capable of locating faults on low & high voltage cables and pinpointing cable faults of cables with DC voltage up to 40kV. ETL40 ...
-
Manufactured by Boltek Corporationbased in CANADA
High accuracy short range detection with three programmable alert level relay outputs designed for use with the EFM-100. This kit includes the inverted EFM-100 with pole mount, and pre-wired waterproof enclosure with the ERL-10, EFA-21 (or EPM-1), relay output expansion cable and fault buzzer. Status monitor display software is also ...
-
Manufactured by Viper Innovations Ltd,based in UNITED KINGDOM
The first platform to offer proactive monitoring, detection and location of both insulator and conductor faults on live low voltage unearthed power distribution systems. CableGuardian encompasses proven technology with extensive industrial heritage in challenging environments to provide a distributed and intelligent cable infrastructure health monitoring system for various electrical ...
-
Manufactured by KharkovEnergoPribor Ltd.based in UKRAINE
Van-based cable test and fault location system ETL-8 is used for testing cable insulation and locating cable faults using a variety of methods. Due to its compact size, ETL-8 may be installed in a minivan, yet it is a fully-featured cable test and fault location system which incorporates burn module and surge wave generator, and is capable of faults pre-location and cable insulation testing with ...
-
Manufactured by Foresight Electronics Co, Ltd.based in CHINA
FST-JD200 not only can provide a solution on accurately testing the faults of the indirect-grounding of the direct current system, non-metal grounding, loop grounding, simultaneous grounding of the anode and cathode, balanced grounding of the anode and cathode and multi-point grounding; it also can accurately display the system voltage, voltage to ground and grounding resistance value. It truly ...
-
Distributed by InterEng Messtechnik GmbHbased in GERMANY
Surge generators of the PS-Line series are used for cable testing and fault location in low and medium voltage networks. With the PS - Line InterEng offers a series of surge generators wich are easy to operate. The surge voltage is continuously adjustable between '0' and the maximum voltage of the selected voltage level. The surge generators are available with different surge voltage ...
-
Manufactured by Applied Techno Products Pvt. Ltd.based in INDIA
High-voltage oscillographic reflectometer "ISKRA-4" is designed for distance fault locations of communication and power supply ...
-
Manufactured by Jacarta Ltd.based in UNITED KINGDOM
PowerZook is a power sensor that can be installed without system downtime to provide rack input power readings via SNMP. PowerZook clips around the outside of rack input power cables to monitor the power draw of the rack equipment for loads of up to 32A. PowerZook provides a smart alternative to smart PDU's where system downtime and/or higher costs are not viable ...
-
Manufactured by Meggerbased in USA
Utility location system to detect and trace cable runs and pipe networks. The Easyloc is fast and simple to operate, with features designed to avoid potentially dangerous power cables and other services as efficiently as possible. Easyloc is suitable for water, rail, gas, power, highways and telecommunication utilities and contractors and anyone who is proposing to engage in ...
-
Manufactured by BAUR GmbHbased in AUSTRIA
The Syscompact 400 is an efficient and safe cable fault location system for high-resistive and intermittent faults on all types of cable. The biggest innovation is the high-performance IRG 400, which replaces its predecessor and is the perfect complement to the tried-and-tested system. Safety was prioritised during development. Both the laptop and the tablet that are used to operate the IRG are ...
-
Manufactured by BAUR GmbHbased in AUSTRIA
The Syscompact 400 portable is an efficient and safe cable fault location system for high-resistive and intermittent faults on all types of cable. The biggest innovation is the high-performance IRG 400, which replaces its predecessor and is the perfect complement to the tried-and-tested system. Safety was prioritised during development. Both the laptop and the tablet that are used to operate ...
-
Manufactured by KharkovEnergoPribor Ltd.based in UKRAINE
Mobile systems SWG-12 and SWG-32 are designed for the following applications: testing insulation of power cables with DC voltage up to 32 kV; conditioning faults by burning faulty cable insulation with DC current up to 100 mA at up to 32 kV voltage; pre-locating cable faults with an aid of the reflectometer RIF-9 using a low-voltage pulse reflection method (TDR) and high-voltage methods: voltage ...
-
Manufactured by Beijing GFUVE Electronics Co., Ltd.based in CHINA
The round jaw design on the S50 Series AC current clamp on CT along with the high content nickel metal core makes them well suited for power quality applications where high accuracy and low phase shift along with wide frequency are important from 10Hz to 10MHz. Measurement range is 1mA to 1200A. The S50 is a general purpose 1200A AC current clamp on CT designed for use with DMMs, power loggers ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you