Combustion Temperature Monitoring Equipment For Energy Monitoring
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The high temperature are is the further developed NOXmatic are for the safe and low-emission combustion of land ll, bio or other special gases within a temperature range from 1000 – 1200 °C. In this temperature range the oxidising gas com- ponents are fully processed, thus greatly reducing the formation of nitrogen ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
The NOXmatic comprises the most up-to-date quality gas are technology ensuring the safe, efficient and environmentally friendly combustion of gases from landfill, bio and sewage gas systems. Depending on the application parameters and the required combustion characteristics, the ares are supplied as either low or medium temperature units supplied with the required additional burner technology. ...
-
PremiumManufactured by Ennox Biogas Technology GmbHbased in AUSTRIA
Since the implementation of the Kyoto treaty the industry has seen a widespread development and tightening of regulations governing greenhouse emissions for the reduction of CO emissions. The issuing of the so called CO certificate not only calls for the Methane gas to be to be burnt in gas flares according to the UNFCC regulations, but also requires the logging and forwarding of the gas quantity ...
-
Manufactured by Anyang Zhenxin Metallurgical Materials Co., Ltdbased in CHINA
Ferrochrome nitride is also called ferro chrome nitride or nitrided ferro chrome. It is a ferroalloy material mainly composed of nitrides such as Cr N, Cr2N, and Fe4N. It is also possible to generate compound nitrides (Cr, Fe) 2N (1-x) of ferrochrome. The main factors affecting its phase composition are nitriding medium and nitriding temperature. The main use of ferrochrome nitride is to produce ...
-
Manufactured by Zakłady Maszynowe Hamech Sp z o.o.based in POLAND
The unit comprises: furnace suitable for burning straw bales or Heston cubes, waste gas/air exchanger, pre air/water heat exchanger, combustion chamber fan, heater blower fan, control ...
-
Manufactured by Wessel-Umwelttechnik GmbH - Deurotech Groupbased in GERMANY
WECO-RTO are regenerative heat exchanger to utilize the energy of the hot clean air to the largest extent possible for heating the cold exhaust air. The energy conversion efficiency of the heat exchanger constitutes above 90% and even the energy at low concentrations of pollution in the exhaust air allows to operate the exhaust air cleaning plant in an autothermical way. Because of a ...
-
Manufactured by Radhika Engineersbased in INDIA
Historically, burning napkins, medical waste has been the only way to prevent the spread of disease. Current method of napkin disposal is unhygienic and results in inconvenience to citizens, environment, animals and Nature. Today, incineration is a method by which controlled combustion of waste matter can be done with minimal environmental impact. Incineration is the best method to control ...
-
Manufactured by Turbotec Engineeringbased in BELGIUM
The TURBOTEC HyTG 550 is a hydrogen fuelled gas turbine, designed as a marine propulsion and generator unit. The engine offers 550kW (737hp) of electric power and in a Combined Heat and Power (CHP), it could provide up to 950kW of thermal power. This modular unit can fit in an 18 ft. high cube (9’6”) shipping container. This modular hydrogen gas turbine generator unit can be ...
-
Manufactured by Biogasmetano S.r.l.based in ITALY
BGM-BIOGASMETANO Flare Stack range include open flares (ground and elevated), as well as enclosed low and high temperature flares. All flares are characterized by simple end effective design, reliable equipment and ease of installation; operation is fully automatic. The high efficiency flares, typical for landfills application, ensuring the constant combustion temperature up to 1200 °C and ...
-
Manufactured by KS PTI CO.,LTDbased in VIETNAM
Oil-fired boiler is a product of KS PTI manufactured to apply in industrial fields requiring heat such as laundry, wood drying, cooking, food processing... completely environmentally friendly. Especially, Indochina oil-fired boilers have been installed at: garment factories, fabric dyeing factories, printing factories, animal feed processing factories, confectionery factories, beverage factories, ...
-
Manufactured by Conveco Srlbased in ITALY
HT-S Type are high-performance enclosed ground flare stacks where biogas combustion temperature, flame retention time and destruction efficiency are the results to be achieved. Combustion occurs inside the base refractory combustion chamber and is completed in the upper cylindrical chamber lined with fiberceramic, under a controlled environment. Air flow is admitted into the combustion chamber ...
-
based in ITALY
Operating Principals: The unit is mainly made up with a shell and tube heat exchanger and a combustion chamber equipped with a modulating burner. The gas containing V.O.C. is preheated passing through the shell and tube heat exchanger up to a temperature close to 450 ÷ 550 °C by mean of the heat released by combustion gases which pass through the shell side of the same heat exchanger, ...
-
Distributed by Wood Energy Ltd.based in UNITED KINGDOM
Highest Efficiency – tested and certified!. Pellets Low temperatur boiler: Down to 38°C . (Range: 38 to 80°C, HSV 9-22 kW). Fully factory-lined combustion chamber for high-temperature combustion. Lambda Sensor with fuel-quality detection. Automatic ash level indication. Best ease of use through SMS module. Superb Factory-Service for Hargassner customers. Extended ...
-
Manufactured by ClearSign Combustion Corporationbased in USA
Complete systems and retrofits available. Ultra Low NOx less than 2.5ppm: Premixed combustion, entrainment of spent flue gases coupled with increased heat loss from a high emissivity ceramic tile enable NOx levels to unprecedented levels never seen in the industry – all without the use of reagents, catalysis and/or high excess air ...
-
Distributed by Spill Shield Internationalbased in USA
MediBurn is the safe and simple solution for the disposal of up to 8 cubic feet / 0.22 cubic meters per load, of infectious and pathological waste for the small medical facility. Portable and easy to operate, MediBurn incinerates everything from laboratory waste to animal remains. The MediBurn runs on diesel fuel and therefore only needs minimal ...
-
Manufactured by Zanni Groupbased in GERMANY
Waste treatment in modern waste incineration plants makes it possible to mineralise the residual waste, reduce the volume of waste, save on landfill volume, reduce waste emissions (including methane, a dangerous greenhouse gas), remove harmful or hazardous components, provide thermal energy and, if there is sufficient thermal combustion energy, produce electricity. ...
-
Manufactured by Flame Spray SpAbased in ITALY
Aluminizing has proven to be a cost effective way to increasing the resistance of metals from corrosion and ...
-
based in INDONESIA
Rinheat has developed and built a new type of recovery boiler for BCTMP liquor. The name Alrec® stands for alkali recovery. The first Alrec® recovery boiler has been in operation at M-real BCTMP mill in Kaskinen Finland since spring 2009. The design capacity is 60 ...
-
Manufactured by Hofstetter BVbased in NETHERLANDS
Standard biogas / WWTP gas flare for sewage or biogas plants. Ideal in combination with gasholder operation and gas systems with constant pressure ratios. Thanks to concealed combustion, the HOFGAS-IFL1c flare attains more than 99% combustion efficiency. Because of no visible flame, erection of the gas flare is most advantageous even near residential areas. The captivating aspect of the biogas ...
-
Manufactured by E.I.Tec. GmbH Energy and Environmental Technologybased in GERMANY
There are two practicable ways of oxidizing or burnout systems. On the one hand there are purely oxidation and on the other hand catalytic ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you