diesel analysis Articles
-
Exergy analysis of a diesel engine cycle and its performance improvement
This paper aims to evaluate available energy losses, i.e. exergy losses caused by irreversible processes in the theoretical cycle of two-stroke and four-stroke diesel engines. All exergy losses in these cycles have been divided into three categories: exergy loss in the heat receiving process which is inevitable in thermal power systems; exergy loss in the scavenging process peculiar to the ...
-
Performance and energy analyses of a diesel engine fuelled with Koroch seed oil methyl ester and its diesel fuel blends
Performance of a single cylinder four–stroke diesel engine is analysed in the light of first law of thermodynamics in this study considering 10% (B10) to 40% (B40) (by volume) blending of Koroch seed oil methyl ester (KSOME) with diesel as fuels. An energy balance study is carried out to quantify the various losses associated with diesel engine processes on the basis of experimental data. ...
-
A study on the thermodynamic analysis of a cascaded latent heat storage system over the single storage tank system for diesel engine waste heat recovery
This article presents the comparison of performance of a cascaded Latent Heat Storage (LHS) system over the Single Storage Tank (SST) system for heat recovery from a diesel engine. The energy and exergy saved and efficiencies during the charging process are evaluated and reported using actual system data. The discharge process is analysed with a case study and it is concluded that it is possible ...
-
The comparative analysis of diesel engine combustion and emission parameters fuelled with palm oil methyl esters and its diesel blends
In this work, the combustion and emission characteristics of a direct injection compression ignition engine fuelled with diesel-Palm Oil Methyl Ester (POME) blends are investigated. This study shows that the ignition delay decreases with increase in the POME addition. The maximum rate of pressure rise and maximum rate of heat release decreases with increase in POME addition at all loads. As the ...
-
Performance and emission characteristics of a DI compression ignition engine operated on PODL biofuel
This paper presents the results of investigations carried out both numerically with the CFD code CONVERGE and experimentally on a single-cylinder, four stroke, direct-injection, CI engine. The tests are performed with neat diesel, neat palm oil (PO) and different blends of PO and the D-limonen solvent (PODL), like 10%, 15% and 20% by mass of D-limonen in PO (PODL10, PODL15 and PODL20). Engine ...
-
Integration of Fischer-Tropsch fuel production with a complex oil refinery
The oil refining industry is facing harder policies on renewable content in its products. One way to meet this is to produce diesel and gasoline from gasification of biomass via a Fischer-Tropsch (FT) synthesis. In this paper, heat integrating a biomass-to-FT syncrude process with a refinery is compared to a stand-alone biomass-to-FT syncrude process, in terms of the consequences for GHG ...
-
Comparative assessment of injection, combustion, performance and emission characteristics of a diesel engine for biodiesel–diesel blends
The effects of different percentage of biodiesel diesel blends on injection, combustion, performance and emission characteristics of a constant speed diesel engine are analysed. The dynamic injection timing advanced with all blends. The in–line pressure and in–cylinder injection duration increased for the biodiesel blends in order to maintain same power output. The premixed combustion and total ...
-
Exergy analysis of a steam power plant: a case study in Iran
In the last decades, exergy analysis, based on the second law of thermodynamics was a method that substituted the energy analysis in studying thermodynamic systems. In this paper, the cycle of a power plant and its details, with two kinds of fuels, natural gas and diesel, have been analysed at its maximum load and the two factors, losses and exergy efficiency, which are the basic factors used to ...
-
InfraSpec VFA-IR Spectrometer for Biodiesel Blend Measurements
Synopsis: Simple, yet powerful, filter-based IR spectrometers are ideal for compliance to the new ASTM 7861 test method for accurately measuring biodiesel blend ratios. The Wilks InfraSpec analyzer was the instrument used to develop and validate this method and thus is the industry standard for field measurement of FAME (Fatty Acid Methyl Ester) blend percentages. Introduction: Biodiesel is a ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you