Only show results in Texas? Ok

Energy Monitoring Applications

  • Premium

    Industrial energy and heat recovery solutions

    Rising fuel and electric costs, along with global warming concerns have changed the way industrial facilities view energy consumption. Process equipment and air pollution control systems that were installed several years ago may not reflect the energy conscious designs available today, analyzing these systems to determine energy reduction opportunities can be a very valuable practice. Recovering waste heat is one of the easiest and most utilized means of reducing energy demands at industrial facilities.

    By Anguil Environmental Systems, Inc. based in Milwaukee, WISCONSIN (USA).

  • Premium

    UV fluorescence technology fo Monitoring Hydroelectric Dam Sumps

    The TD-4100XD, with its UV fluorescence technology and non-contact flow cell, has very strong advantages over any other oil in water monitor for this application.

    By Turner Designs Hydrocarbon Instruments, Inc. based in Fresno, CALIFORNIA (USA).

  • Premium

    Machine condition monitoring for biofuels

    Overview The use of ethanol as a gasoline additive has increased dramatically over the past few years and will likely continue to increase. For fuel blenders, this means an added challenge to avoid an incorrect blend that could lead to regulatory fines, loss of customer confidence and damage to equipment. A quick on-site analysis with a portable mid-infrared based analyzer, such as the InfraCal 2 Ethanol Blend Analyzer shown in the photo, can help fuel blenders quickly flag out-of-spec product and ensure the...

    By Spectro Scientific based in Chelmsford, MASSACHUSETTS (USA).

  • Premium

    Meteorological sensors for solar monitoring industry

    The most important measurement parameter is irradiation. Since PV systems are becoming ever larger, the accuracy of the irradiation measurement is increasingly important for the efficiency of the system. Wind cools the temperature of the module and must therefore be included in the efficiency calculation. Precipitation leads to contamination or covering (snow). With increasing temperature, the performance of the solar module decreases. Therefore, it is important to measure the temperature of the solar module in...

    By OTT HydroMet based in Kempten, GERMANY.

  • Premium

    Measurement and Sampling Solutions for Radiological & nuclear monitoring

    Bertin Instruments provides a range of reliable and high-performance products fully adapted to the fight against CBRN terrorism and covers any emergency situation, particularly in border control situations.

    By Bertin Instruments SAS based in Montigny-le-Bretonneux, FRANCE.

  • Premium

    Online monitoring solutions for the power generation industries

    Fundamental changes are evident in the power industry. From a highly regulated and monopolistic industry, it is evolving rapidly into a marketplace defined by increasing competition and deregulation. Technology providers should be in the game allowing power companies to focus on their core business, producing electricity at maximum efficiency.

    By AppliTek NV based in Nazareth, BELGIUM.

  • Premium

    Electronic pressure measurement devices for energy / renewable energy sources industry

    In this era of economic crises, oil crises and discussions regarding nuclear power stations, there is an increasing focus on "renewable energy sources" and the "energy industry". Not only high efficiency but also precision, durability and stability are essential factors here. Pressure transmitters and level transmitters from BD|SENSORS guarantee exactly that. Whether you are involved in conventional energy production or in the field of renewable energy sources, with BD|SENSORS you have a reliable partner to help...

    By BD|Sensors GmbH based in Thierstein, GERMANY.

  • Premium

    Precision moisture analysis instruments for measuring moisture and ash in biomass

    If you produce or consume biomass fuels, you know that quality is critical to your success, and you know that moisture and ash content control are critical to biomass fuel quality. Too much moisture and you get poor efficience and high emissions. Too much ash and you get fouling and slagging. And if either of those is uncontrolled, purchase contracts can fall through. Computrac can help.

    By AMETEK Brookfield based in Chandler, ARIZONA (USA).

  • Premium

    Biogas Monitoring for the Renewable Energy Industry

    AppliTek`s solutions in this field concentrate on the process efficiency of anaerobic digesters. Many existing digesters give unnecessary problems, which arise due to inadequacies in the process or process control system. AppliTek has developed a unique instrument to measure and control the key processes in the anaerobic fermentation. Compact gas analyzers with proprietary technology can be implemented to check the biogas yield. Parameters: Volatile Fatty Acids - Alkalinity - pH - Bicarbonate Gas parameters: CH4...

    By AppliTek NV based in Nazareth, BELGIUM.

  • Photovoltaic Plant Monitoring

    By Nethix S.r.l. based in Castelfranco Veneto (TV), ITALY.

  • Value-Added Services for Energy & Infrastructure

    Global demand for energy and infrastructures is increasing rapidly due to economic and population growth. New challenges are created by the need to fulfil the societal demand for energy and mobility, the necessity to reduce emissions and pollutants, and obligations to comply with environmental regulations. Satellite Earth observation is a highly cost-effective means for the assessment of energy demand and renewable energy potential, monitoring of infrastructure development, environmental impact assessment and the...

    By GeoVille Information Systems GmbH based in Innsbruck, AUSTRIA.

  • Biogas monitoring

    meet governmental regulations, it is important to accurately monitor methane gas production, removal, venting, and burning. Knowledge of both methane flow and temperature at the flare stack can define when CH4 is being emitted to the atmosphere. The DX99 FlexPower™ Nodes can be installed in EX area with a Zone 0 ATEX certification. Use the analogue input to determine methane production levels and flow and use the thermocouple model to measure the temperature of a vent to verify the continuous combustion of...

    By Banner Engineering Corp. based in Minneapolis, MINNESOTA (USA).

  • Instruments and analyzers for stability monitoring of sun simulators

    Monitoring the stability of a sun simulator enables the researcher to improve the stability of the PV cell and precision of the I-V measurement. The sun simulator is for example used to test the produced PV solar panel and classify it according to the STC standardization.

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Renewable Energies

    The instruments are made both to be mounted in complete systems, and to be integrated into third-party systems with a logic of simplicity, flexibility and convenience. One of the priorities for operators of renewable energy production plants is a precise and reliable assessment of production performance both in the design and identification of the site, both in the investment assessment phase and in the most operational phase at short term and long term. In fact it is necessary to continuously monitor the efficienc...

    By LSI-LASTEM srl based in Milano, ITALY.

  • Catalyst Monitoring Services

    Catalyst monitoring services use periodic performance testing and lab analysis to track the condition of newly installed catalyst. The goal is to extend the life of the catalyst and it begins by establishing a relationship between operating hours and the catalyst’s condition and performance. Testing and analytical services reveal any decline in performance, direct catalyst maintenance services such as chemical washing, and provide a basis for estimating catalyst life. The scope of catalyst monitoring is scaled...

    By EmeraChem based in Knoxville, TENNESSEE (USA).

  • Energy monitoring and control solutions for the indoor air Quality industry

    Energy monitoring and control solutions for the indoor air Quality industry.

    By Enerwise based in Hong Kong, CHINA.

  • Instruments and analyzers for measure spectral irradiance of sun simulator

    Sun simulators are available in different classes indicating the performance characteristics by the combination of three letters (A,B or C) (according to IEC 60904, JIS 8912 and ASTM E 927-05). Each letter represents respectively the spectral match with the solar spectrum (1000 W/m2, AM 1.5), uniformity of the light field and temporary stability. Class AAA are considered as most accurate and have an ideal spectral match between 0.75 and 1.25, max. 2.0% non-uniformity and 0.5% nonstability according to the IEC...

    By EKO Instruments based in San Jose, CALIFORNIA (USA).

  • Inspection, Monitoring and Management Technologies for Power Generation Industry

    Although power plant operators maintain shorter pressure pipe distances to support their operations, regular maintenance and safe management is extremely important because the pipes have a high consequence of failure.

    By Pure Technologies - a Xylem brand based in Calgary, ALBERTA (CANADA).

  • Wind monitoring for the wind energy industry

    By Scientific Sales, Inc. based in Lawrenceville, NEW JERSEY (USA).

Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you