Engine Monitoring Equipment For Energy Monitoring
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The Continental Controls Corporation Black Box, also known as the CCC Black Box, is a specialized device used to monitor and control engines. It is a compact, rugged electronic control unit that is designed to withstand the harsh conditions. The CCC Black Box is primarily used in gas turbine engines, and it is responsible for managing a wide range of functions, including engine speed control, ...
-
PremiumManufactured by Continental Controls Corporation (CCC)based in USA
The CCC Catalyst Monitor by Continental Controls Corporation is a centralized control system that allows for multiple inputs (O2 Sensor, NOx Sensor, Cat dP, Cat Temperature), and outputs enabling optimal performance when combined with CCC ECV5 air-fuel ratio control valve and an NSCR or Oxidation catalysts. Acting as a central communication hub, it integrates inputs and outputs for various ...
-
Manufactured by Vapor Pinbased in UNITED KINGDOM
The Vapor Pin® Insert is used to facilitate the collection of soil gas samples and pressure measurements beneath engineered vapor intrusion barriers (e.g., Geo-Seal®), or vapor mitigation coatings (e.g., Retro-Coat™) - PVC_Insert.01 ...
-
Manufactured by Mecc Alte SpAbased in ITALY
GC315 is suitable for managing the most common single or three phase generator applications (Single Prime Mover and Single Standby gensets). It can monitor three phase (RMS) mains voltages and three phase (RMS) generator voltages and currents. An integrated J1939 Canbus interface enables the controller to be used with electronic engines. A traditional interface can be used for non-electronic ...
-
Manufactured by Dyne Systems, Divison of Taylor Dynamometerbased in USA
Power: 16 hp (11.9 kW) Torque: 42 lb-ft (56.9 Nm) Maximum Speed: 6,400 rpm Constant Torque Range: 0 - 2,000 rpm Constant Power Range: 2,000 - 3,200 rpm Decreasing Power Range: 3,200 - 6,400 rpm Rotation: ...
-
Manufactured by Acksen Ltd.based in UNITED KINGDOM
The EC-7VAR energy recorder is used by electrical contractors, power distribution companies, facilities management, electrical or site-services and maintenance engineers to monitor power (kW)/energy (kWh) usage, check voltage and current variations helping them to diagnose any related issues, or to gather data perhaps to make representations to their power supplier. Extensively used for UPS ...
-
Manufactured by Binniesbased in UNITED KINGDOM
As humankind’s activities cause climate change, we are becoming more aware of the imperative to reduce our carbon emissions to help provide a sustainable long-term solution for shaping a world in which we can all thrive. Although global carbon emissions continue to grow, many countries and trading blocks are taking action to reduce carbon emissions to net zero by 2050. Many sectors and ...
-
Manufactured by Doosan HF Controls Corporationbased in USA
The new HFC All-In-One Compact Flame Scanner was meticulously designed for continuous, intermittent, and 72-hour operation. The flame scanner's durable housing integrates both the scanner and amplifier into one subcompact assembly, which reduces overall cost and simplifies installation tremendously. Additional costs normally required for mounting the control electronics in a separate, service ...
-
based in USA
Compatible with all Diesel / Propane / Gas or Electric powered pumps. Connects to Tier3/4 via J1939 Standard. Cellular link to IAS Backend Website including high-gain Cellular Antenna. Customer can monitor and control Engine/Pump via IAS Website. Web Interface supports 3 Schedules per Day across 7 Days per Week. Monitors engine conditions and will alert user via SMS on any event. Optional ...
-
Manufactured by Amp Xbased in UNITED KINGDOM
Our transactive-ready Virtual Power Plant (VPP) aggregates the flexibility, monitors the status and optimises the dispatch of a multitude of assets from community-scale to utility-scale ones, all in real-time. By emulating the behaviour of traditional power plants, groups of decentralised assets can participate in grid services, which would otherwise be impossible for them ...
-
Manufactured by PCE Instrumentsbased in UNITED KINGDOM
PCE-DFG N Digital Dynamometer for tensile force measurement and pressure force measurement up to 20 N / Very high accuracy / Sampling rate 1600 Hz / 6 different measuring tips / USB interface / Software / Calibration certificate. A digital force gauge for tensile and compressive force measurements up to 20 N is available with the PCE-DFG N 20. The PCE-DFG N 20 is a digital force meter for precise ...
-
Manufactured by Bergen Engines ASbased in NORWAY
The Bergen B-series is based on a modular design, which gives a flexible platform and at the same time carries forward the Bergen traditional values as a robust and reliable engine. The selection of technology was done after consulting a broad range of operators, designers and shipbuilders, to establish the qualities they prize in an engine. This engine series was first introduced to the market ...
-
Manufactured by John Deerebased in USA
The 60G’s compact size and reduced-tail-swing design enable this small-but-mighty machine to specialize in close-quarters work. But that’s not the only reason to run one. Its highly fuel-efficient, direct-injected diesel meets rigid Final Tier 4 emissions standards and is noticeably quiet so you can put it to work almost anywhere, any time. Standard-equipped with backfill blade, ...
-
based in NETHERLANDS
Refinery Systems provides octane and diesel equipment and services for laboratory and on-line applications. We have 47+ years of service experience in the Petroleum Industry. Our operations globally provide laboratory, on-line analysis systems, accessories and services. Core Laboratories is the largest worldwide distributor of Waukesha CFR octane and cetane rating engines, parts, and ...
-
Manufactured by GREGORY Technology GmbHbased in GERMANY
The FCS system-D-190 is an integrated system for the measurement of engines (diesel engines) with forward and return line for fuel supply with the fuel pump at the engine (suction). The measuring range is 0.1 to 250l/h, and the output of the internal pump for fuel circulation is max. ...
-
Manufactured by Schottel GmbHbased in GERMANY
Highly efficient, sustainable, versatile – thanks to the particularly effective combination of powerful propeller thrust and lateral force, the SCHOTTEL EcoPeller fulfils all the requirements of a modern high-performance propulsion unit. The hydrodynamically optimized design allows the EcoPeller to produce maximum steering forces and enables top values in terms of overall efficiency and ...
-
Manufactured by Mecc Alte SpAbased in ITALY
The GC400 is a competitive controller ideally suited for managing different types of parallel applications, especially for MPM (Multiple Prime Mover] and MSB (Multiple Standby) power plants, where the synchronization of several gensets is required. It can be installed easily and quickly, thanks to an internal load sharing and ...
-
Manufactured by Phillips & Temro Industriesbased in USA
Ensure Cold Weather Starts with Engine Block Heaters. Engine block heaters designed and tested for each individual engine application. Manufactured under the Zerostart / Temro brands, several types of engine block heaters are available to meet your specific needs, including freeze plug heaters, threaded immersion heaters, plate-style heaters and cartridge heaters. For the most comprehensive line ...
-
Manufactured by Phillips & Temro Industriesbased in USA
Keep oil warm and free flowing for instant lubrication with oil and transmission immersion heaters. Available with or without thermostats, Oil Pan Heaters are frequently used in conjunction with Engine Block Heaters as the most effective cold start strategy. The stainless steel low watt density heating elements provide long life in oil and hydraulic ...
-
Manufactured by Schottel GmbHbased in GERMANY
Efficient, low cavitation, streamlined – the SCHOTTEL TwinPropeller is the ideal propulsion solution for vessels or applications with limited installation space, draught or propeller clearance. Based on the principle of the proven SRP, the STP ensures combined thrust and 360-degree manoeuvring power with its two co-rotating propellers. Distributing the load over two propellers boosts the ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you