Engine Monitoring Equipment For Energy Monitoring
-
Manufactured by N J Froment and Company Limitedbased in UNITED KINGDOM
Housed in a robust industrial aluminium enclosure with IP65 protection, membrane keyboard and 4.3" TFT colour screen. The Hand-held allows remote working whilst still having live display information and control of the four test modes and gives information of high idle speed, maximum torque and torque ...
-
Manufactured by Cubic Sensor and Instrument Co., Ltdbased in CHINA
The NOx sensor used for catalyst management in vehicles with gasoline or diesel engines. The NOx sensor consists of a ceramic sensor element and an electronic control unit (ECU). The NOx sensor measures the NOx concentration, air/fuel ratio (A/F ratio) and equilibrium oxygen partial pressure in the exhaust gas of combustion engines (gasoline and ...
-
Manufactured by Hansford Sensorsbased in UNITED KINGDOM
90° bracket with BNC bulkhead socket & dustcap fitted to cabled accelerometers up to 05mm ...
-
Manufactured by MBW Incbased in USA
The R422 & R442 Series Rammers are ideally suited for the compaction of granular, mixed and cohesive soils in confined areas. A mainstay in contractor and municipal fleets, the R422 & R442 offer highly productive percussion rammers at less than 145 or 150 lbs. respectively. The contoured fuel tank provides the largest fuel capacity in its class and effectively baffles engine noise. Power ...
-
Manufactured by Electric Motor & Contracting (EMC)based in USA
For over 60 years EMC has been re-manufacturing Electric Motors from our centrally located Campus in Chesapeake. VA. Our location allows us to easily serve the maritme. water/waste water, power and industrial ...
-
Manufactured by Burkhardt GmbHbased in GERMANY
This Burkhardt adaptation of the popular MAN D26 pilot injection gas engine of the CHP ECO 180 HG operates without pilot oil. Thus, it is operated on wood gas alone and is even easier to service. The pilot oil unit was removed. Instead, the wood gas-air mixture is ignited with spark plugs. The Burkhardt ECO 165 HG, together with the Burkhardt V 3.90 wood gasifier, generates about 165 kW ...
-
Manufactured by Sentronics Limitedbased in UNITED KINGDOM
The FlowSonic® Sport ultrasonic sensor from Sentronics™ is used across the upper echelons of international motorsport championships for unrivalled fuel flow monitoring in harsh conditions. Advanced ultrasonic sensing technology provides extremely accurate measurement data for clear insight into fuel consumption and to increase engine efficiency. The rapid measurement response rate ...
-
Manufactured by John Deerebased in USA
Looking to get more out of your “mini ex”? Make your next compact excavator one of our G-Series. Inspired by input from equipment owners and operators like you, this 50G Compact Excavator is loaded with customer-driven enhancements. Such as a more spacious cab with a wider entryway. Larger expanse of glass for unsurpassed visibility. Fuel-saving auto-shutdown and power/economy work ...
-
Manufactured by KRAL GmbHbased in AUSTRIA
Fuel consumption accounts for a considerable portion of vessel operating costs. A great deal of experience and exceptional measuring technology are necessary to acquire reliable measured values for fuel consumption. KRAL offers both. With our help you can save where it makes sense. KRAL has 15 years of experience with the fuel consumption ...
-
Manufactured by ENKO Electronic Control Systems San. Tic. Ltd. Şti.based in TURKEY
MSU 2.0 offers all necessary control functions for single Generator applications. MSU 2.0 is a full Manual Start Unit intended to be used for single Gen-Set applications. Full Generator control functions can be implemented through the unit program menu. The unit has a configuration parameter menu which can be accessed from the front panel. All engine parameters can be monitored and full engine ...
-
Manufactured by RAM EUROPEbased in GREECE
Multi purpose vehicle 4Χ4 with metallic working chamber, with mechanism for cable laying, dynamometer, mechanism for cable dismounting and cutting and cable drums transport ...
-
Manufactured by Moventas Gears Oybased in FINLAND
Gain a competitive edge with the Moventas digital service solution. Utilize real-time data to improve your productivity and ...
-
Manufactured by KL-Maschinenbau GmbH & Co. KGbased in GERMANY
The compactness of the EGGERS PT 170 dynamometer is impressive and allows it to be accommodated in even in the most confined of workplaces. This dynamometer can be supplied as both a mobile workshop version as well as on an 80 km/h chassis. Boasting a performance range of up to 300 kW for a rapid test and 170 kW for a full-load curve, the PT 170 dynamometer already covers the majority of ...
-
Manufactured by Thomson Power Systems member of Regal Beloit Corporationbased in CANADA
The PGC 4000v2 is an intelligent, integrated Power Generation Controller operating with our Series 2400 Paralleling ...
-
Manufactured by KL-Maschinenbau GmbH & Co. KGbased in GERMANY
Measurement of fuel consumption for mobile automotive measurement technology – For billing to the nearest liter, training sessions, driver training, vehicle comparison tests etc. The FCM - 100 is a fuel consumption meter developed to be installed in vehicles and stationary engines, and is the product of many years of experience spent developing semi-mobile fuel consumption meters for our ...
-
Manufactured by John Deerebased in USA
The 9009A TerrainCut Rough Mower: where productivity and control meets cut quality. Until now, using a wide area mower in the rough meant compromising on your quality of cut. With the new 9009A TerrainCut Rough mower, you can now maximize both your productivity and your cut quality while having more control over how it performs on the course. The 9009A is a five-gang, 27-inch (68.58 cm) ...
-
Manufactured by Danvest Energy A/Sbased in DENMARK
A family heritage within the Danish diesel industry has led Danvest to develop a deep understanding of diesel engine behaviour. It is this detailed understanding that resulted in the complementary relationship between wind turbines and Danvest equipped diesel ...
-
Manufactured by Kahn & Company, Inc.based in USA
Inherent low inertia and quick transient response make the Kahn Series 101 and 102 dynamometers ideal for load testing of medium speed turboshaft engines, light turboprop engines, auxiliary power units (APUs), engine power takeoffs (PTOs), aircraft accessory gearboxes and helicopter transmissions. In many of these applications, time-consuming coupling shaft alignment is eliminated by mounting the ...
-
Manufactured by GEF - Efffe Group S.R.L.based in ITALY
The high performance fan Mod. RS with upturned blades is used for the job where is necessary an high capacity and low prevalence and they are used for the suction of clean and not much dusty air. They are built in strong sheet steel painted, steel fan statically and dinamic equilibrated. Fluid temperature: up to 60°C in standard execution; special executions for higher ...
-
Manufactured by Faria Beede Instruments, Inc.based in USA
This system is the lowest cost, most user-friendly digital product in the market for customers installing digital technology. The MG1000 is the stepping-stone of digital instrumentation. This innovative digital gauge system requires no LCDs, no system initialization, no menu setups and no user manual interaction for use - ever! Just install and go boating! The MG1000 gauge system displays engine ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you