Fuel Flowmeter Equipment For Energy Monitoring In Europe
-
Manufactured by Mechatronicsbased in BELARUS
Eurosens Direct fuel consumption sensors are designed to measure fuel consumption of diesel engines or other consumers in the range from 1 to 3000 liters per hour. Direct flowmeters have a wide range of modifications, (100, 250, 500, 1500, 3000 liters per hour), can have built-in display and different output interfaces. There are versions with threaded and flange ...
-
Manufactured by Bell Flow Systems Ltd.based in UNITED KINGDOM
VZO 4 Contoil Fuel / Oil Meter - (1-50 Max 80 litre/hr). Mechanical Totaliser (Litres) Non-reset. 1/8" BSP (Supplied c/w 10mm compression ...
-
Distributed by Gulersan Lubrication Equipment Co Ltd.based in TURKEY
Transfer set can be used in all fuel transfer operations, fast, safe, and easy use, accurate ...
-
Manufactured by OVAL Corporationbased in JAPAN
A small-size high performance positive displacement flowmeter for managing the remainder of fuel oil tank, replenish period, and precisely measuring the consumption of fuel oil that is essential for billing the ...
-
Manufactured by Gill Sensors & Controls Limitedbased in UNITED KINGDOM
The Gill Ultrasonic Fuel Flow Meter is compact, lightweight and designed to withstand extreme levels of vibration and temperature. The Fuel Flow Meter uses proven solid-state ultrasonic flow measurement technology to detect bi-directional fuel flow rates up to 8000ml/min. The fuel flow meter is capable of monitoring both transient and steady fuel flow, flow direction, fuel temperature and ...
-
Distributed by Gulersan Lubrication Equipment Co Ltd.based in TURKEY
Single inlet / single outlet. With mechanical counter register. MT-7 serie dispenser is a configurable fuel dispenser, designed to fit your specific retail fuelling needs. This flexibility allows you to choose from varying hose reach up to 7.5 meters. MT-7 enables fast fleet fueling with flow rates up to 200 liters/min according to the ...
-
Manufactured by Sentronics Limitedbased in UNITED KINGDOM
Designed to uphold fair competition, sporting integrity and ensure compliance of fuel usage by delivering fully encrypted fuel flow measurement of automotive engines to governing bodies. The surveillance flow meter is trusted by the FIA® and fitted across all Formula 1™ vehicles on the grid for reliable monitoring, precision measurement and to avoid tampering of existing fuel flow ...
-
Manufactured by Aquametro Oil & Marine AG, A part of INTEGRA Metering AGbased in SWITZERLAND
Mass flow measurement, Integrated temperature sensor, Simple burner setting with flow rate display, Simple consumption monitoring with limiting value switch Qmin/Qmax, Manual dosing feature, with a resettable counter be mounted on the pressure or suction side of a pump, Space-saving installation, because no straight inlet/outlet sections are required, Flexible mounting of the meter in horizontal, ...
-
Distributed by Gulersan Lubrication Equipment Co Ltd.based in TURKEY
MT-6 serie pump has been developed for the distribution of Diesel fuel in non-commercial uses.With MT-6 fuel pumps, vehicles can be refuelled quickly and safely, with various options for measuring and recording the quantities dispensed. The flow-meters mounted on MT-6 pumps have sturdy mechanical readout systems whose reliability and easiness to use have been proved by ...
-
Manufactured by Sentronics Limitedbased in UNITED KINGDOM
The FlowSonic® GT is designed to deliver reliable fuel flow measurement for automotive engines of every type. Advanced ultrasonic sensing technology provides high accuracy monitoring of flow rate for performance (optimising fuel use and strategy) and compliance for regulatory (balance of performance and limiting peak engine power) motorsport applications. Suitable for FIA® WEC & ...
-
Manufactured by Emiliana Serbatoi S.r.l.based in ITALY
Polyethylene tank for Diesel fuel transport in exemption from ADR - paragraph 1.1.3.1.C. Compact and light, manufactured in roto-molded linear polyethylene, Carrytank 440 is equipped with the following fittings: filling plug, air vent device, fuel transfer unit, integrated forklift pockets (full tank), handles for lifting and carrying (empty tank) and integrated recesses for securing with ...
-
Manufactured by Eljunga JSCbased in LITHUANIA
Fuel control system and its products might seem difficult and unsafe to install and to use. Well, it’s a myth. All 19 years that we are in the market, we are proving that the knowledge we are putting in our products makes them reliable and safe to use. Fuel flow meter ELC401 is one of the oldest products in our portfolio, so we put so many years for developing and updating it to reach the ...
-
Manufactured by Amotbased in USA
The 8402G Fuel Valve System is a balanced rotary valve with an electric stepper-motor actuator. This high performance gas turbine fuel control valve with fast operation speed and large turn down ratio is designed for reliable an efficient control of any gas ...
-
Manufactured by Sentronics Limitedbased in UNITED KINGDOM
The HORIBA RealFlow fuel flow meter, powered by Sentronics, represents a breakthrough in fuel flow measurement technology for automotive engines of every type. The RealFlow has been designed for the ultra low-volume fuel flow conditions found in today’s high-efficiency road car engines, making it an ideal tool for R&D as well as emissions testing to the new RDE and WLTP standards. ...
-
Manufactured by Sentronics Limitedbased in UNITED KINGDOM
The FlowSonic® Sport ultrasonic sensor from Sentronics™ is used across the upper echelons of international motorsport championships for unrivalled fuel flow monitoring in harsh conditions. Advanced ultrasonic sensing technology provides extremely accurate measurement data for clear insight into fuel consumption and to increase engine efficiency. The rapid measurement response rate ...
-
Manufactured by Bell Flow Systems Ltd.based in UNITED KINGDOM
MG80 Fuel / Diesel Flow Meter . 10~90 L/min, Accuracy: +/- 1% . 1' BSP connections . 3 digit resetabble / 6 digit non resetabble total . Flexible Installation options due to port arrangement . Polyamide Resin construction (fireproof) . Max 3.5 Bar working pressure, 60ºC Max Temp { Not suitable for Petrol ...
-
Manufactured by Eljunga JSCbased in LITHUANIA
This one is our smallest fuel consumption device, which is made on the AquaMetro VZO4 base and improved in our manufacturing plant with additional sensor. ELC441 flowmeter can be used in a huge variety of vehicles- from big agriculture machines to light commercial cars, compatibility depends on a flow ...
-
Distributed by Gulersan Lubrication Equipment Co Ltd.based in TURKEY
1344P (Vane Type) pump is a high pressurized, has a 3' diameter of inlet/outlet dimensions and 180° inlet and outlet connections. Inner mechanism consist of cast iron, aluminium and injection parts. All the dynamic seals/gaskets are used to materials made of FKM in order to give reliable performance in the high petroleum ...
-
Manufactured by Mechatronicsbased in BELARUS
Special service kit Eurosens Destination for professional customization of Mechatronics equipment. Most of our Eurosens sensors contain inside a powerful modern 32-bit microprocessor that continuously calculates various parameters (current fuel level, fuel consumption, fuel volume).To obtain the correct data from Eurosens fuel level sensors and fuel flow sensors, they must be configured by an ...
-
Manufactured by Troikatec Internationalbased in SWITZERLAND
A versatile flow meter for oil, heavy oil and many other oil-like liquids. It is used for efficient consumption measurement of heat burners and various combustion engines. A reliable solution for any application where oil is ...
Need help finding the right suppliers? Try XPRT Sourcing. Let the XPRTs do the work for you